Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 20 Aug 2004 19:38:32 +0200
From:      Corrado Ficicchia <dino@xrays.de>
To:        current@freebsd.org
Subject:   vr0: watchdog timeout
Message-ID:  <41263718.9010201@xrays.de>

next in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------060801000709080905000606
Content-Type: text/plain; charset=us-ascii; format=flowed
Content-Transfer-Encoding: 7bit

Hi all,

cvsupped today from -current 15.Jul to 5.3-ALPHA.
When I now use vr I get "vr0: watchdog timeout".
With kernel from 15.Jul vr worked...

Any ideas?(verbose boot msg is attached)

greetings
--
Corrado 'Dino' Ficicchia


--------------060801000709080905000606
Content-Type: text/plain;
 name="dmesg"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="dmesg"

Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD 5.3-ALPHA #1: Fri Aug 20 15:17:53 CEST 2004
    root@fomp:/usr/obj/usr/src/sys/FOMP
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0790000.
Preloaded elf module "/boot/kernel/ng_bpf.ko" at 0xc0790244.
Preloaded elf module "/boot/kernel/netgraph.ko" at 0xc07902f0.
Preloaded elf module "/boot/kernel/ng_ether.ko" at 0xc07903a0.
Preloaded elf module "/boot/kernel/ng_iface.ko" at 0xc0790450.
Preloaded elf module "/boot/kernel/ng_ppp.ko" at 0xc0790500.
Preloaded elf module "/boot/kernel/ng_pppoe.ko" at 0xc07905ac.
Preloaded elf module "/boot/kernel/ng_socket.ko" at 0xc079065c.
Preloaded elf module "/boot/kernel/ng_vjc.ko" at 0xc079070c.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07907b8.
Table 'FACP' at 0xeff3040
Table 'APIC' at 0xeff7cc0
MADT: Found table at 0xeff7cc0
MP Configuration Table version 1.4 found at 0xc00f1400
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 0: enabled
ACPI APIC Table: <VKT400 AWRDACPI>
Calibrating clock(s) ... i8254 clock: 1193014 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 1197962949 Hz
CPU: AMD Duron(tm) processor (1197.96-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x681  Stepping = 1
  Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
  AMD Features=0xc0400000<AMIE,DSP,3DNow!>
Data TLB: 32 entries, fully associative
Instruction TLB: 16 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L2 internal cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 8-way associative
real memory  = 251592704 (239 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000826000 - 0x000000000eb87fff, 238428160 bytes (58210 pages)
avail memory = 240726016 (229 MB)
bios32: Found BIOS32 Service Directory header at 0xc00faf60
bios32: Entry = 0xfb3d0 (c00fb3d0)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xb420
pnpbios: Found PnP BIOS data at 0xc00fbf00
pnpbios: Entry = f0000:bf30  Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 0
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: intr override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: intr override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
     ID: 0x00000000   VER: 0x00040010 LDR: 0x01000000 DFR: 0x0fffffff
  lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
ath_hal: <Atheros Hardware Access Layer>version 0.9.6.3
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <VKT400 AWRDACPI> on motherboard
acpi0: [MPSAFE]
pci_open(1):	mode 1 addr port (0x0cf8) is 0x80008840
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=32051106)
pcibios: BIOS version 2.10
Found $PIR table, 6 entries at 0xc00fdee0
PCI-Only Interrupts: 5 10 11
Location  Bus Device Pin  Link  IRQs
slot 1      0    8    A   0x01  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    B   0x02  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    C   0x03  3 4 5 7 9 10 11 12 14 15
slot 1      0    8    D   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    A   0x02  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    B   0x03  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    C   0x05  3 4 5 7 9 10 11 12 14 15
slot 2      0    9    D   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    A   0x03  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    B   0x05  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    C   0x01  3 4 5 7 9 10 11 12 14 15
slot 3      0   10    D   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0   17    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0   17    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0    1    A   0x01  3 4 5 7 9 10 11 12 14 15
embedded    0    1    B   0x02  3 4 5 7 9 10 11 12 14 15
embedded    0    1    C   0x03  3 4 5 7 9 10 11 12 14 15
embedded    0    1    D   0x05  3 4 5 7 9 10 11 12 14 15
embedded    0   18    A   0x01  3 4 5 7 9 10 11 12 14 15
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 0
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 15 func 1
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
ACPI timer looks GOOD min = 2, max = 3, width = 1
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.0
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.1
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.2
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.16.3
\\_SB_.PCI0.ALKA irq  0: [20]  0+ low,level,sharable 0.17.0
\\_SB_.PCI0.ALKB irq  0: [21]  0+ low,level,sharable 0.17.1
\\_SB_.PCI0.ALKC irq  0: [22]  0+ low,level,sharable 0.17.2
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.17.3
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.0
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.1
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.2
\\_SB_.PCI0.ALKD irq  0: [23]  0+ low,level,sharable 0.18.3
\\_SB_.PCI0.ALKA irq  0: [20]  0+ low,level,sharable 0.15.0
\\_SB_.PCI0.ALKA irq  0: [20]  0+ low,level,sharable 0.15.1
\\_SB_.PCI0.ALKA irq  0: [20]  0+ low,level,sharable 0.15.2
\\_SB_.PCI0.ALKA irq  0: [20]  0+ low,level,sharable 0.15.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
	map[10]: type 3, range 32, base e6000000, size 22, enabled
found->	vendor=0x1106, dev=0x3205, revid=0x00
	bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
	lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0xb198, revid=0x00
	bus=0, slot=1, func=0
	class=06-04-00, hdrtype=0x01, mfdev=0
	cmdreg=0x0107, statreg=0xa230, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x0c (3000 ns), maxlat=0x00 (0 ns)
	map[10]: type 1, range 32, base e6400000, size 16, enabled
pcib0: matched entry for 0.8.INTA
pcib0: slot 8 INTA hardwired to IRQ 16
found->	vendor=0x168c, dev=0x0013, revid=0x01
	bus=0, slot=8, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0006, statreg=0x0290, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x0a (2500 ns), maxlat=0x1c (7000 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D3  current D0
	map[10]: type 1, range 32, base e6410000, size 11, enabled
	map[14]: type 4, range 32, base 00009000, size  7, enabled
pcib0: matched entry for 0.9.INTA
pcib0: slot 9 INTA hardwired to IRQ 17
found->	vendor=0x1106, dev=0x3044, revid=0x80
	bus=0, slot=9, func=0
	class=0c-00-10, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x20 (8000 ns)
	intpin=a, irq=17
	powerspec 2  supports D0 D2 D3  current D0
	map[10]: type 4, range 32, base 00009400, size  3, enabled
	map[14]: type 4, range 32, base 00009800, size  2, enabled
	map[18]: type 4, range 32, base 00009c00, size  3, enabled
	map[1c]: type 4, range 32, base 0000a000, size  2, enabled
	map[20]: type 4, range 32, base 0000a400, size  4, enabled
	map[24]: type 4, range 32, base 0000a800, size  8, enabled
pcib0: matched entry for 0.15.INTB (src \\_SB_.PCI0.ALKA)
pcib0: possible interrupts: 20
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ALKB (references 5, priority 250):
	interrupts:	    21
	penalty:	    50
\\_SB_.PCI0.ALKA (references 5, priority 250):
	interrupts:	    20
	penalty:	    50
\\_SB_.PCI0.ALKD (references 5, priority 250):
	interrupts:	    23
	penalty:	    50
\\_SB_.PCI0.ALKC (references 1, priority 10):
	interrupts:	    22
	penalty:	    10
acpi link set: _CRS failed for link \\_SB_.PCI0.ALKA - AE_NULL_ENTRY
acpi link set: curr irq 0 != 20 for \\_SB_.PCI0.ALKA (ignoring)
unknown: _SRS failed, irq 20 via \\_SB_.PCI0.ALKA
found->	vendor=0x1106, dev=0x3149, revid=0x80
	bus=0, slot=15, func=0
	class=01-04-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=b, irq=10
	powerspec 2  supports D0 D3  current D0
	map[20]: type 4, range 32, base 0000ac00, size  4, enabled
found->	vendor=0x1106, dev=0x0571, revid=0x06
	bus=0, slot=15, func=1
	class=01-01-8a, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=255
	powerspec 2  supports D0 D3  current D0
found->	vendor=0x1106, dev=0x3227, revid=0x00
	bus=0, slot=17, func=0
	class=06-01-00, hdrtype=0x00, mfdev=1
	cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
	powerspec 2  supports D0 D3  current D0
	map[10]: type 4, range 32, base 0000c000, size  8, enabled
	map[14]: type 1, range 32, base e6412000, size  8, enabled
pcib0: matched entry for 0.18.INTA (src \\_SB_.PCI0.ALKD)
pcib0: possible interrupts: 23
ACPI PCI link arbitrated settings:
\\_SB_.PCI0.ALKB (references 5, priority 500):
	interrupts:	    21
	penalty:	   100
\\_SB_.PCI0.ALKD (references 5, priority 500):
	interrupts:	    23
	penalty:	   100
\\_SB_.PCI0.ALKC (references 1, priority 20):
	interrupts:	    22
	penalty:	    20
acpi link set: _CRS failed for link \\_SB_.PCI0.ALKD - AE_NULL_ENTRY
acpi link set: curr irq 0 != 23 for \\_SB_.PCI0.ALKD (ignoring)
unknown: _SRS failed, irq 23 via \\_SB_.PCI0.ALKD
found->	vendor=0x1106, dev=0x3065, revid=0x78
	bus=0, slot=18, func=0
	class=02-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0210, cachelnsz=8 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
	intpin=a, irq=11
	powerspec 2  supports D0 D1 D2 D3  current D0
agp0: <VIA Generic host to PCI bridge> mem 0xe6000000-0xe63fffff at device 0.0 on pci0
agp0: Reserved 0x400000 bytes for rid 0x10 type 3 at 0xe6000000
agp0: allocating GATT for aperture of size 255M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1:   secondary bus     1
pcib1:   subordinate bus   1
pcib1:   I/O decode        0xf000-0xfff
pcib1:   memory decode     0xe4000000-0xe5ffffff
pcib1:   prefetched decode 0xe0000000-0xe3ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
	map[10]: type 3, range 32, base e0000000, size 26, enabled
pcib1: device (null) requested decoded memory range 0xe0000000-0xe3ffffff
	map[14]: type 1, range 32, base e4000000, size 24, enabled
pcib1: device (null) requested decoded memory range 0xe4000000-0xe4ffffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found->	vendor=0x1106, dev=0x7205, revid=0x01
	bus=1, slot=0, func=0
	class=03-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0007, statreg=0x0230, cachelnsz=0 (dwords)
	lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns)
	intpin=a, irq=16
	powerspec 2  supports D0 D1 D2 D3  current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
ath0: <Atheros 5212> mem 0xe6400000-0xe640ffff irq 16 at device 8.0 on pci0
ath0: Reserved 0x10000 bytes for rid 0x10 type 3 at 0xe6400000
ath0: [GIANT-LOCKED]
ath0: mac 5.9 phy 4.3 5ghz radio 4.6
ath0: bpf attached
ath0: Ethernet address: 00:0f:3d:86:cc:ab
ath0: bpf attached
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: bpf attached
pci0: <serial bus, FireWire> at device 9.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xa800-0xa8ff,0xa400-0xa40f,0xa000-0xa003,0x9c00-0x9c07,0x9800-0x9803,0x9400-0x9407 irq 10 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xa400
atapci0: [MPSAFE]
ata2: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x9400
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0x9800
ata2: reset tp1 mask=03 ostat0=7f ostat1=7f
ata2-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=ff stat1=ff devices=0x0
ata2: [MPSAFE]
ata3: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x9c00
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xa000
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave:  stat=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0xac00-0xac0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xac00
ata0: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata0-slave:  stat=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=20 ostat1=30
ata1-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata1-slave:  stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xc000-0xc0ff mem 0xe6412000-0xe64120ff irq 11 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xc000
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 8
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:e0:4c:bb:99:36
vr0: [GIANT-LOCKED]
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
psmcpnp0 irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0xffffffff (1)
kbd0 at atkbd0
kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0047
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0 on isa0
sc0: <System console> on isa0
sc0: VGA <16 virtual consoles, flags=0x200>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0e 0f 00 00 07 80 9c 6e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 6e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 6e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fdc0 failed to probe at port 0x3f0 irq 6 drq 2 on isa0
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
sio0 failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0
sio1 failed to probe at port 0x2f8 irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 1197962949 Hz quality 800
Timecounters tick every 10.000 msec
IP Filter: v3.4.35 initialized.  Default = pass all, Logging = disabled
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x45 cable=80pin
ata0-master: setting PIO4 on VIA 8237 chip
ata0-master: setting UDMA100 on VIA 8237 chip
ad0: <SAMSUNG SP0411N/TW100-11> ATA-7 disk at ata0-master
ad0: 38204MB (78242976 sectors), 77622 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 10 (ISA IRQ 10) to cluster 0
ioapic0: routing intpin 11 (ISA IRQ 11) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 16 (PCI IRQ 16) to cluster 0
GEOM: new disk ad0
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:78236487
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 40057081344 end 40057113599
GEOM: Configure ad0s1a, start 0 length 268435456 end 268435455
GEOM: Configure ad0s1b, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad0s1c, start 0 length 40057081344 end 40057081343
GEOM: Configure ad0s1d, start 1342177280 length 1073741824 end 2415919103
GEOM: Configure ad0s1e, start 2415919104 length 1073741824 end 3489660927
GEOM: Configure ad0s1f, start 3489660928 length 10737418240 end 14227079167
GEOM: Configure ad0s1g, start 14227079168 length 25830002176 end 40057081343
Mounting root from ufs:/dev/ad0s1a
start_init: trying /sbin/init
Linux ELF exec handler installed
vr0: watchdog timeout


--------------060801000709080905000606--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41263718.9010201>