Date: Fri, 17 Dec 2004 13:20:42 +0100 From: Karsten Fuhrmann <karsten_fuhrmann@cartoon-film.de> To: freebsd-questions@freebsd.org Subject: RAID0 problem array broken Message-ID: <41C2CF1A.8090207@cartoon-film.de>
next in thread | raw e-mail | index | archive | help
Hello,
tonight my RAID0 configuration broke.
It seems to be only a loose cable or power cord, which i fixed already.
But now my ar0 stripe will not be recognised anymore.
/var/log/messages showed this :
Dec 17 03:24:44 darkstar kernel: ad6: FAILURE - ATA_IDENTIFY timed out
Dec 17 03:24:49 darkstar kernel: ad6: FAILURE - ATA_IDENTIFY timed out
Dec 17 03:24:49 darkstar kernel: ad6: deleted from ar0 disk1
Dec 17 03:24:49 darkstar kernel: ar0: ERROR - array broken
Dec 17 03:24:49 darkstar kernel: ad6: WARNING - removed from configuration
Dec 17 03:24:49 darkstar kernel: ar0: ERROR - array broken
And "atacontrol list" even shows all disks, here the output
ATA channel 2:
Master: ad4 <ST3200822AS/3.01> Serial ATA v1.0
Slave: no device present
ATA channel 3:
Master: ad6 <ST3200822AS/3.01> Serial ATA v1.0
Slave: no device present
ATA channel 4:
Master: ad8 <WDC WD2000JD-00HBB0/08.02D08> Serial ATA v1.0
Slave: no device present
These 3 Disks are my stripe set!
Is there a way to recreate the stripe set without losing the data on the
disks?
I think there must be an easy way, because e.g. ill take these disks to
a friends computer(with the same controller) it should be possible to
use my raid on his machine, right?
I am running 5.3-RELEASE with a Promise TX 4
Karsten
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?41C2CF1A.8090207>