Date: Sun, 22 May 2005 11:57:51 +0200 From: Andreas Tobler <toa@pop.agri.ch> To: Peter Grehan <grehan@freebsd.org> Cc: freebsd-ppc@freebsd.org Subject: Re: OF boot commands for firewire Message-ID: <4290579F.90102@pop.agri.ch> In-Reply-To: <42900A67.90307@freebsd.org> References: <428FAEA2.50805@pop.agri.ch> <42900A67.90307@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format. --------------000900080405050904090108 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi Peter! Peter Grehan wrote: > Almost :) > > For partition 3, what you want to do is: > > boot hd:7,\boot\loader fw/node/sbp-2/disk@0:3 > > If the fstab file is set up on the firewire drive, the kernel will just > go straight into mounting root without prompting. Wheee, like a charm. Great. I even built and booted my "own" kernel. THANKS for your support! Attached the dmesg.albook with uninorth.debug=1 since the pci1b fails. I do not set anything else in the boot prompt except I have to reduce my mem to 512M. I do not set hint.pcib.1.skipslot=26. I can use the external usb w/o problems so far. Maybe the dmesg gives you some idea what happens. In the meantime I learn a bit more fbsd :) Thanks, Andreas --------------000900080405050904090108 Content-Type: text/plain; x-mac-type="0"; x-mac-creator="0"; name="dmesg.albook" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg.albook" Copyright (c) 1992-2005 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.0-20050518-SNAP #0: Sun May 22 10:50:14 CEST 2005 root@albook.andreas.nets:/usr/obj/usr/src/sys/GENERIC WARNING: WITNESS option enabled, expect reduced performance. Timecounter "decrementer" frequency 18432000 Hz quality 0 cpu0: Motorola PowerPC 7447A revision 1.1, 752.32 MHz cpu0: HID0 8450c0bc<EMCP,TBEN,NAP,DPM,ICE,DCE,SGE,BTIC,LRSTK,FOLD,BHT> real memory = 536870912 (512 MB) avail memory = 519360512 (495 MB) nexus0: <Open Firmware Nexus device> openpic0: <OpenPIC Interrupt Controller> on nexus0 unin0: <Apple UniNorth System Controller> on nexus0 unin0: Version 210 pcib0: <Apple UniNorth Host-PCI bridge> on nexus0 uninorth: io start 0 size 800000 uninorth: mem f1000000 size f2000000 uninorth: mem b0000000 size c0000000 pci0: <PCI bus> on pcib0 pci0: <display, VGA> at device 16.0 (no driver attached) pcib1: <Apple UniNorth Host-PCI bridge> on nexus0 uninorth: io start 0 size 800000 uninorth: mem f3000000 size f4000000 uninorth: mem 80000000 size 90000000 uninorth: mem 90000000 size a0000000 uninorth: mem a0000000 size b0000000 pci1: <PCI bus> on pcib1 pcib1: failed to reserve resource for (null) failed request: type 3 start 80000000 end 8007ffff pci1: <network> at device 18.0 (no driver attached) pci1: <bridge, PCI-CardBus> at device 19.0 (no driver attached) macio0: <Intrepid I/O Controller> mem 0x80000000-0x8007ffff at device 23.0 on pci1 zs0: <Zilog Z8530> mem 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff irq 22,23 on macio0 zs0: [FAST] zs0: [FAST] zstty0: <ttyy0> on zs0 zstty1: <ttyy1> on zs0 ata0 mem 0x20000-0x20fff,0x8800-0x88ff irq 24 on macio0 ohci0: <OHCI (generic) USB controller> irq 0 at device 24.0 on pci1 ohci0: [GIANT-LOCKED] usb0: OHCI version 1.0, legacy support usb0: <OHCI (generic) USB controller> on ohci0 usb0: USB revision 1.0 uhub0: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <OHCI (generic) USB controller> irq 0 at device 25.0 on pci1 ohci1: [GIANT-LOCKED] usb1: OHCI version 1.0, legacy support usb1: <OHCI (generic) USB controller> on ohci1 usb1: USB revision 1.0 uhub1: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ohci2: <OHCI (generic) USB controller> mem 0xa0003000-0xa0003fff irq 29 at device 26.0 on pci1 ohci2: [GIANT-LOCKED] usb2: OHCI version 1.0, legacy support usb2: <OHCI (generic) USB controller> on ohci2 usb2: USB revision 1.0 uhub2: Apple OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ohci3: <NEC uPD 9210 USB controller> mem 0xa0002000-0xa0002fff irq 63 at device 27.0 on pci1 ohci3: [GIANT-LOCKED] usb3: OHCI version 1.0 usb3: <NEC uPD 9210 USB controller> on ohci3 usb3: USB revision 1.0 uhub3: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 3 ports with 3 removable, self powered ohci4: <NEC uPD 9210 USB controller> mem 0xa0001000-0xa0001fff irq 63 at device 27.1 on pci1 ohci4: [GIANT-LOCKED] usb4: OHCI version 1.0 usb4: <NEC uPD 9210 USB controller> on ohci4 usb4: USB revision 1.0 uhub4: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered ehci0: <NEC uPD 720100 USB 2.0 controller> mem 0xa0000000-0xa00000ff irq 63 at device 27.2 on pci1 ehci0: [GIANT-LOCKED] usb5: EHCI version 1.0 usb5: companion controllers, 3 ports each: usb3 usb4 usb5: <NEC uPD 720100 USB 2.0 controller> on ehci0 usb5: USB revision 2.0 uhub5: NEC EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub5: 5 ports with 5 removable, self powered pcib2: <Apple UniNorth Host-PCI bridge> on nexus0 uninorth: io start 0 size 800000 uninorth: mem f5000000 size f6000000 pci2: <PCI bus> on pcib2 ata1: <Intrepid Kauai ATA Controller> mem 0xf5004000-0xf5007fff irq 39 at device 13.0 on pci2 fwohci0: <Apple UniNorth> mem 0xf5000000-0xf5000fff irq 40 at device 14.0 on pci2 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channels is 8. fwohci0: EUI64 00:0d:93:ff:fe:35:b3:80 fwohci0: invalid speed 7 (fixed to 3). fwohci0: Phy 1394a available S800, 3 ports. fwohci0: Link S800, max_rec 4096 bytes. firewire0: <IEEE1394(FireWire) bus> on fwohci0 fwe0: <Ethernet over FireWire> on firewire0 if_fwe0: Fake Ethernet address: 02:0d:93:35:b3:80 fwe0: Ethernet address: 02:0d:93:35:b3:80 fwe0: if_start running deferred for Giant sbp0: <SBP-2/SCSI over FireWire> on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc1, gen=2, CYCLEMASTER mode firewire0: 2 nodes, maxhop <= 1, cable IRM = 1 (me) firewire0: bus manager 1 (me) gem0: <Apple GMAC3 Ethernet Adaptor> mem 0xf5200000-0xf53fffff irq 41 at device 15.0 on pci2 miibus0: <MII bus> on gem0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto gem0: 10kB RX FIFO, 4kB TX FIFO gem0: Ethernet address: 00:0d:93:35:b3:80 gem0: if_start running deferred for Giant gem0: [GIANT-LOCKED] sc0: <System console> on nexus0 sc0: Unknown <16 virtual consoles, flags=0x300> ugen0: vendor 0x05ac product 0x8203, rev 1.10/5.26, addr 2 uhub6: vendor 0x0409 product 0x55ab, class 9/0, rev 1.00/1.00, addr 2 uhub6: 4 ports with 4 removable, bus powered ukbd0: Alps Electric M2452, rev 1.00/1.01, addr 3, iclass 3/1 Timecounters tick every 10.000 msec acd0: DVDR <MATSHITACD-RW CW-8123/CA0T> at ata0-master BIOSPIO ad0: 76319MB <FUJITSU MHT2080AT 8162> at ata1-master BIOSPIO firewire0: New S400 device ID:0001a30000054263 da0 at sbp0 bus 0 target 0 lun 0 da0: <Genesys > Fixed Direct Access SCSI-0 device da0: 50.000MB/s transfers da0: 4769MB (9767520 512 byte sectors: 255H 63S/T 608C) Trying to mount root from ufs:/dev/da0s3 --------------000900080405050904090108--
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4290579F.90102>