Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 30 Jan 2008 16:58:31 -0800
From:      Tech Lab Manager <tech@liveoaksf.org>
To:        freebsd-acpi@freebsd.org
Subject:   SMP, ACPI and interrupt storm
Message-ID:  <429F40B0-20EE-4F47-847A-A6B1E91BA79F@liveoaksf.org>

next in thread | raw e-mail | index | archive | help
Hello,

Sorry for the cross-post from freebsd-smb.

Building 6.3-RELEASE and 7.0-RC1 on dual Xeon (4 CPU) boxes:

	options         SMP
	device          apic

SMP kernel builds fine, all 4 CPUs launch on reboot.
But I get a TON of interrupts from acpi0 -- about 67,000 per second
according to vmstat -i. With system at idle and almost no services
running, here is output of top -S:

last pid:   877;  load averages:  1.18,  0.48,  0.19
75 processes:  6 running, 54 sleeping, 15 waiting
CPU states:  0.0% user,  0.0% nice,  0.2% system, 22.4% interrupt,   
77.4% idle
Mem: 31M Active, 12M Inact, 28M Wired, 16K Cache, 15M Buf, 3822M Free
Swap: 4096M Total, 4096M Free

PID USERNAME   THR PRI NICE   SIZE    RES STATE  C   TIME   WCPU   
COMMAND
10 root         1 171   52     0K     8K RUN    3   1:11 99.18%   
idle: cpu3
13 root         1 171   52     0K     8K CPU0   0   1:10 98.88%   
idle: cpu0
12 root         1 171   52     0K     8K CPU1   1   1:09 98.78%   
idle: cpu1
21 root         1 -52 -171     0K     8K CPU2   2   0:54 87.24%   
irq9: acpi0
11 root         1 171   52     0K     8K RUN    2   0:17 11.19%   
idle: cpu2

Notice high load and interrupt % of CPU.

If turn off ACPI (e.g. set hint.apic.0.disabled=1 in /boot/loader.conf),
the interrupt storm ceases, but then I'm only running on one CPU.

The BIOS ACPI settings are all Enabled. Hyperthreading is Enabled.
These machines have been running RedHat Enterprise 5.0 with full
multiprocessor support.

Any pointers? TIA.

-- 
John Berliner
Live Oak School
http://www.liveoaksf.org




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?429F40B0-20EE-4F47-847A-A6B1E91BA79F>