Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 24 Oct 2005 19:59:28 +0200
From:      Georg Bege <therion@ninth-art.de>
To:        =?UTF-8?B?IkFybmUgXCJXw7ZybmVyXCIi?= <arne_woerner@yahoo.com>,  freebsd-multimedia@freebsd.org
Subject:   Re: problems with bktr0 and cheap TV card FlyVideo
Message-ID:  <435D2100.2090706@ninth-art.de>
In-Reply-To: <20051024135913.69403.qmail@web30313.mail.mud.yahoo.com>
References:  <20051024135913.69403.qmail@web30313.mail.mud.yahoo.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Well sorry but I think you all underestimate my problem,
if I want to hear plain audio from my tv card then I dont need to set 
the recording because it isnt about recording.
Though I already tried that and I've set the mixer rec source to line 
and 100 volume.
Still nothing, I guess its more complicated then this.

Arne "W�������������������������������" wrote:

>As far as I remember you should do a
># mixer rec 50
>or so, too... So that the volume is ok...
>
>Zero is not enough... Family motto... ;-))
>                      ^^^ that was just a joke... Okay...
>
>And like it was said correctly: The recording source is to be set
>to the right value...
>
>In my system I can hear the audio signal with and without
>recording source set correctly... I mean: I just say "mixer cd 50"
>and then I can hear the TV audio signal... But maybe I have a
>funny audio card (VIA 8233 or so)...
>
>-Arne
>
>
>--- Molnár Csaba <csabamolnar@gmail.com> wrote:
>
>  
>
>>On Monday 24 October 2005 15.31, Georg Bege wrote:
>>I don't see the recording source line in your mixer output, like
>>in here:
>>
>>mcsaba@mcsaba$ mixer
>>Mixer vol      is currently set to  80:80
>>Mixer pcm      is currently set to  79:79
>>Mixer speaker  is currently set to  75:75
>>Mixer line     is currently set to  75:75
>>Mixer mic      is currently set to   0:0
>>Mixer cd       is currently set to  75:75
>>Mixer rec      is currently set to   0:0
>>Mixer ogain    is currently set to  50:50
>>Mixer line1    is currently set to  75:75
>>Mixer phin     is currently set to   0:0
>>Mixer phout    is currently set to   0:0
>>Recording source: mic
>>
>>If you plugged the audio cable in line in, you should try:
>>
>>mixer =rec line
>>
>>    
>>
>>>Thanks for your reply,
>>>
>>>I connect the audio cable from the tv card in line-in.
>>>
>>>Arne
>>>      
>>>
>"W�������������������������������"
>  
>
>>wrote:
>>    
>>
>>>>--- Georg Bege <therion@ninth-art.de> wrote:
>>>>        
>>>>
>>>>>I've a problem on FreeBSD 6.0-RC1 with an cheap TV card,
>>>>>
>>>>>bktr0: <BrookTree 878> mem 0xec000000-0xec000fff irq 21 at
>>>>>device 10.0
>>>>>on pci2
>>>>>bktr0: [GIANT-LOCKED]
>>>>>bktr0: Card has no configuration EEPROM. Cannot determine
>>>>>          
>>>>>
>>card
>>    
>>
>>>>>make.
>>>>>bktr0: IMS TV Turbo, Philips FR1236 NTSC FM tuner.
>>>>>
>>>>>Im using fxtv with following command:
>>>>>
>>>>>therion@fortuna ~ % fxtv -inputFormat pal -tunerMode cable
>>>>>-defaultInput
>>>>>tuner -defaultAudioInput tuner -cableFreqSet weurope
>>>>>-mixerChannel line
>>>>>
>>>>>I got channels and the picture but no audio,
>>>>>Im using a Sound Blaster Live! Value (older card) with
>>>>>          
>>>>>
>>emu10k1
>>    
>>
>>>>>which
>>>>>works perfectly.
>>>>>My machine is a Pentium 4 3.0GHz with 1024M DDR-SDRAM.
>>>>>
>>>>>Here the relevant data of my KERNCONF:
>>>>>
>>>>># bktr support
>>>>>device          iicbus
>>>>>device          iicbb
>>>>>device          smbus
>>>>>device          iicsmb
>>>>>device          bktr
>>>>>options         BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
>>>>>
>>>>>Some sysctl entries in /etc/sysctl.conf:
>>>>>
>>>>>hw.bt848.card=10
>>>>>hw.bt848.tuner=10
>>>>>
>>>>>mixer settings:
>>>>>
>>>>>Mixer vol      is currently set to 100:100
>>>>>Mixer pcm      is currently set to  81:81
>>>>>Mixer speaker  is currently set to  75:75
>>>>>Mixer line     is currently set to  95:95
>>>>>Mixer mic      is currently set to   0:0
>>>>>Mixer cd       is currently set to  75:75
>>>>>Mixer rec      is currently set to   0:0
>>>>>Mixer line1    is currently set to  75:75
>>>>>Mixer phin     is currently set to   0:0
>>>>>Mixer phout    is currently set to   0:0
>>>>>Mixer video    is currently set to  75:75
>>>>>
>>>>>PS: Soundcard works on GNU/Linux, just wanted to say that it
>>>>>          
>>>>>
>>is
>>    
>>
>>>>>impossible that the card is broken/damaged.
>>>>>          
>>>>>
>>>>Where did you connect the audio connector? To the mic-in,
>>>>        
>>>>
>>line-in
>>    
>>
>>>>or cd-in? Or does the TV card send the audio data via PCI to
>>>>        
>>>>
>>the
>>    
>>
>>>>bktr driver?
>>>>
>>>>My pinnacle TV card sends the audio data via a cable to the
>>>>        
>>>>
>>cd-in
>>    
>>
>>>>connector...
>>>>
>>>>-Arne
>>>>
>>>>
>>>>
>>>>
>>>>__________________________________
>>>>Start your day with Yahoo! - Make it your home page!
>>>>http://www.yahoo.com/r/hs
>>>>        
>>>>
>>>_______________________________________________
>>>freebsd-multimedia@freebsd.org mailing list
>>>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
>>>To unsubscribe, send any mail to
>>>"freebsd-multimedia-unsubscribe@freebsd.org"
>>>      
>>>
>>_______________________________________________
>>freebsd-multimedia@freebsd.org mailing list
>>http://lists.freebsd.org/mailman/listinfo/freebsd-multimedia
>>To unsubscribe, send any mail to
>>"freebsd-multimedia-unsubscribe@freebsd.org"
>>
>>    
>>
>
>
>
>		
>__________________________________ 
>Yahoo! FareChase: Search multiple travel sites in one click.
>http://farechase.yahoo.com
>  
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?435D2100.2090706>