Date: Thu, 03 Nov 2005 20:22:13 +1300 From: Mark Kirkwood <markir@paradise.net.nz> To: freebsd-current@freebsd.org Subject: 6.0-RC1 on Promise SX4060 (SETFEATURES FAILURE, READ timed out) Message-ID: <4369BAA5.5040107@paradise.net.nz>
next in thread | raw e-mail | index | archive | help
Hi, I am trying to install 6.0-RC1 on a system with a Promise SX4060 (PDC20621) + 4 Maxtor ATA-133 drives (6E040L0). The mobo is a Tyan Thunder LE (S2510). The card appears to be detected ok : atapci2: <Promise PDC20621 UDMA100 controller> port 0xe800-0xe8ff,0xe400-0xe4ff, 0xe000-0xe0ff mem 0xfea00000-0xfeafffff,0xfebd8000-0xfebdffff irq 23 at device 3 .0 on pci1 atapci2: rid 0x20 is memory, requested 4 atapci2: Reserved 0x8000 bytes for rid 0x20 type 3 at 0xfebd8000 atapci2: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xfea00000 atapci2: [MPSAFE] atapci2: DIMM size 1024MB @ 0x00000000 but the drive probing fails completely: ad4 : FAILURE - SET FEATURES TRANSFER MODE timed out. ad4 : FAILURE - SET FEATURES RCACHE timed out. ad4 : FAILURE - SET FEATURES WCACHE timed out. ad4 : FAILURE - SET FEATURES SET_MULTI. ad4 : FAILURE - READ timed out (LBA = 80293185) ad4 : FAILURE - READ retrying (0 retries left) LBA = 0 .. ad4 : req = 0xc3b78960 SET FEATURES SET TRANSFER MODE semaphore timeout !!DANGER WILL ROBINSON!! .. .. (hand copied as I don't have a serial console) These drives seem ok (work with a TX2000 and a 2Ware 7506). In order to eliminate the drives, I have tried a seagate ST340014A as well - same result. Any suggestions about how to proceed (I would like to get this going) Cheers Mark
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4369BAA5.5040107>