Date: Fri, 03 Feb 2006 13:43:43 +0100 From: Andrea Venturoli <ml.diespammer@netfence.it> To: freebsd-questions@freebsd.org Subject: k3b hardware detection Message-ID: <43E34FFF.2090009@netfence.it>
next in thread | raw e-mail | index | archive | help
Hello. I just tryed installing k3b and I did follow all the instruction from pkg-message5. The problem now is that my burner is detected as a cd-rom read only device. First of all: _ I'm using FreeBSD 6-STABLE; I followed the instruction for FreeBSD 5.x, since that's what I was presented with; there are no instructions for 6, but I guess those are good; _ here are my relevant dmesg: > sym0: <895> port 0xd800-0xd8ff mem 0xd5202000-0xd52020ff,0xd5201000-0xd5201fff irq 15 at device 10.0 on pci0 > sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking > sym0: [GIANT-LOCKED] > ... > cd1 at sym0 bus 0 target 6 lun 0 > cd1: <YAMAHA CRW8824S 1.0a> Removable CD-ROM SCSI-2 device > cd1: 20.000MB/s transfers (20.000MHz, offset 15) > cd1: Attempt to query device size failed: NOT READY, Medium not present - tray closed ... > cd0 at sym0 bus 0 target 4 lun 0 > cd0: <PLEXTOR CD-ROM PX-40TS 1.12> Removable CD-ROM SCSI-2 device > cd0: 20.000MB/s transfers (20.000MHz, offset 15) > cd0: cd present [207330 x 2048 byte records] _ camcontrol devlist gives: > <SEAGATE ST39205LW 0105> at scbus0 target 0 lun 0 (da0,pass0) > <PLEXTOR CD-ROM PX-40TS 1.12> at scbus0 target 4 lun 0 (cd0,pass1) > <IOMEGA ZIP 100 E.08> at scbus0 target 5 lun 0 (da1,pass2) > <YAMAHA CRW8824S 1.0a> at scbus0 target 6 lun 0 (cd1,pass3) Notice everything is true SCSI. K3B sees the two following readonly devices: > YAMAHA CRW8824S > PLEXTOR CD-ROM PX-40TS Obviously the first shoud be listed in Writer Devices... BTW cdrecord & co. work fine. Any hint? bye & Thanks av.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?43E34FFF.2090009>