Skip site navigation (1)Skip section navigation (2)
Date:      Tue, 15 Aug 2006 13:20:34 +0300
From:      "Android Andrew [:]" <android@oberon.pfi.lt>
To:        freebsd-stable@freebsd.org
Subject:   FreeBSD 6.1-STABLE: Unexplained power off
Message-ID:  <44E19FF2.9080709@oberon.pfi.lt>

next in thread | raw e-mail | index | archive | help
Hi everyone!

My system (FreeBSD callisto 6.1-STABLE FreeBSD 6.1-STABLE #4: Mon Aug 14 
13:32:00 EEST 2006 root@callisto:/usr/obj/usr/src/sys/callisto i386) 
powers down during compilation - doesn't matter it is any port (kde, 
openoffice) or "make -j4 buildworld". Computer powers off without any 
message (screen, or /var/log/messages, or core-file). The same hardware 
worked without any problems during the last six months under FreeBSD 
6.0-STABLE amd64.

To turn computer on I need to press and hold for several seconds "Power" 
button, then I have to release the button, and press it again.
At first I thought that problem could be in CPU, power supply, mobo 
chips overheating, but temperature sensors reported everything is OK. To 
be on the safe side I installed additional radiators and coolers. But it 
doesn't solve the problem.
I've noticed that system is unstable under high disk io load during 
compilation.

Could anyone give me an idea how to diagnose the problem in this case?

Thanks in Advance!

My hardware is:
Asus P5LD2 with 2 Gb Ram

dmesg:
  Copyright (c) 1992-2006 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
FreeBSD 6.1-STABLE #4: Mon Aug 14 13:32:00 EEST 2006
     root@callisto:/usr/obj/usr/src/sys/callisto
ACPI APIC Table: <A M I  OEMAPIC >
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Pentium(R) 4 CPU 3.00GHz (3010.68-MHz 686-class CPU)
   Origin = "GenuineIntel"  Id = 0xf43  Stepping = 3
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNTX-ID,CX16,<b14>>
   AMD Features=0x20100000<NX,LM>
   Logical CPUs per core: 2
real memory  = 2147090432 (2047 MB)
avail memory = 2092134400 (1995 MB)
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ichwd module loaded
acpi0: <A M I OEMXSDT> on motherboard
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi_bus_number: can't get _ADR
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
cpu1: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci4: <ACPI PCI bus> on pcib1
nvidia0: <GeForce 6600> mem 
0xd4000000-0xd7ffffff,0xd8000000-0xdfffffff,0xd3000000-0xd3ffffff irq 16 
at device 0.0 on pci4
nvidia0: [GIANT-LOCKED]
pci0: <multimedia> at device 27.0 (no driver attached)
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci3: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci2: <ACPI PCI bus> on pcib3
myk0: <Marvell 88E8053 Gigabit Ethernet Controller, Ver. 8.12.2.3> port 
0xc800-0xc8ff mem 0xd2efc000-0xd2efffff irq 19 at device 0.0 on pci2
myk0: Ethernet address: 00:13:d4:d0:31:e5
uhci0: <UHCI (generic) USB controller> port 0x8000-0x801f irq 20 at 
device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <UHCI (generic) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <UHCI (generic) USB controller> port 0x8400-0x841f irq 17 at 
device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <UHCI (generic) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <UHCI (generic) USB controller> port 0x8800-0x881f irq 18 at 
device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <UHCI (generic) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <UHCI (generic) USB controller> port 0x9000-0x901f irq 19 at 
device 29.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <UHCI (generic) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 
0xd2dff800-0xd2dffbff irq 20 at device 29.7 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <Intel 82801GB/R (ICH7) USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
uhub4: device problem (IOERROR), disabling port 7
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH7 SATA300 controller> port 
0xa800-0xa807,0xa400-0xa403,0xa000-0xa007,0x9800-0x9803,0x9400-0x940f 
mem 0xd2dffc00-0xd2dfffff irq 23 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
ata4: <ATA channel 2> on atapci1
ata5: <ATA channel 3> on atapci1
ichsmb0: <SMBus controller> port 0x400-0x41f irq 23 at device 31.3 on pci0
ichsmb0: [GIANT-LOCKED]
smbus0: <System Management Bus> on ichsmb0
smb0: <SMBus generic I/O> on smbus0
acpi_button0: <Power Button> on acpi0
speaker0: <PC speaker> port 0x61 on acpi0
fdc0: <floppy drive controller (FDE)> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 
on acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77f irq 7 drq 
3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on 
acpi0
sio0: type 16550A
ichwd0: <Intel ICH5 watchdog timer> on isa0
orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0 at vga0
ukbd0: Key Tronic Keytronic USB Keyboard, rev 1.10/1.02, addr 2, iclass 3/1
kbd2 at ukbd0
ums0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 3, iclass 3/1
ums0: 4 buttons and Z dir.
Timecounters tick every 1.000 msec
WARNING: apm_saver module requires apm enabled
ipfw2 (+ipv6) initialized, divert loadable, rule-based forwarding 
enabled, default to deny, logging limited to 100 packets/entry by default
acd0: DVDR <PIONEER DVD-RW DVR-111D/1.19> at ata0-master UDMA66
ad4: 114473MB <Seagate ST3120813AS 2AAA> at ata2-master SATA300
ad6: 114473MB <Seagate ST3120813AS 2AAA> at ata3-master SATA300
ar0: 228942MB <Intel MatrixRAID RAID0 (stripe 128 KB)> status: READY
ar0: disk0 READY using ad4 at ata2-master
ar0: disk1 READY using ad6 at ata3-master
SMP: AP CPU #1 Launched!
cd0 at ata0 bus 0 target 0 lun 0
cd0: <PIONEER DVD-RW  DVR-111D 1.19> Removable CD-ROM SCSI-0 device
cd0: 66.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ar0s1a
WARNING: /var was not properly dismounted
myk0: link up
oss: Out of mixer extensions for device 0


kernel:
machine         i386
cpu             I686_CPU
options         CPU_FASTER_5X86_FPU
options         CPU_DISABLE_SSE
ident           callisto
maxusers        256
options         SCHED_ULE               # ULE scheduler
#options        SCHED_4BSD              # 4BSD scheduler
options         SMP
options         PREEMPTION              # Enable kernel threadpreemption
options         IPI_PREEMPTION
options     MPTABLE_FORCE_HTT       # Enable HTT CPUs with the MP Table
options         INET                    # InterNETworking
#options        INET6                   # IPv6 communications protocols
options         FFS                     # Berkeley Fast Filesystem
options         SOFTUPDATES             # Enable FFS soft updates support
options         UFS_ACL                 # Support for access control lists
options         UFS_DIRHASH             # Improve performance on big 
directories
options         MD_ROOT                 # MD is a potential root device
options         MSDOSFS                 # MSDOS Filesystem
options         CD9660                  # ISO 9660 Filesystem
options         PROCFS                  # Process filesystem (requires 
PSEUDOFS)
options         PSEUDOFS                # Pseudo-filesystem framework
options         GEOM_GPT                # GUID Partition Tables.
options         COMPAT_43               # Compatible with BSD 4.3 [KEEP 
THIS!]
options         COMPAT_FREEBSD4         # Compatible with FreeBSD4
options         COMPAT_FREEBSD5         # Compatible with FreeBSD5
options         COMPAT_LINUX            # Compatible with i386 linux 
binaries
options         SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
options         KTRACE                  # ktrace(1) support
options         SYSVSHM                 # SYSV-style shared memory
options         SYSVMSG                 # SYSV-style message queues
options         SYSVSEM                 # SYSV-style semaphores
options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time 
extensions
options         KBD_INSTALL_CDEV        # install a CDEV entry in /dev
options     FB_INSTALL_CDEV
options         ADAPTIVE_GIANT          # Giant mutex is adaptive.
options         LINPROCFS               # Cannot be a module yet.
options     LINSYSFS
device          apic                    # I/O apic
device          acpi
device          pci
device          fdc
# ATA and ATAPI devices
device          ata
device          atadisk         # ATA disk drives
device          ataraid         # ATA RAID drives
device          atapicd         # ATAPI CDROM drives
device          atapicam
options         ATA_STATIC_ID   # Static device numbering
# SCSI peripherals
device          scbus           # SCSI bus (required for SCSI)
device          da              # Direct Access (disks)
device          sa              # Sequential Access (tape etc)
device          cd              # CD
device          pass            # Passthrough device (direct SCSI access)
device          ses             # SCSI Environmental Services (and SAF-TE)
# atkbdc0 controls both the keyboard and the PS/2 mouse
device          atkbdc          # AT keyboard controller
device          atkbd           # AT keyboard
device      kbdmux      # keyboard multiplexer
device          psm             # PS/2 mouse
device          vga             # VGA video card driver
device          splash          # Splash screen and screen saver support
# syscons is the default console driver, resembling an SCO console
device          sc
#device         agp             # support several AGP chipsets
device          apm
device          apm_saver       # Requires APM
# Serial (COM) ports
device          sio             # 8250, 16[45]50 based serial ports
# Parallel port
device          ppc
device          ppbus           # Parallel port bus (required)
device          lpt             # Printer
device          miibus          # MII bus support
device          sk              # SysKonnect SK-984x & SK-982x gigabit 
device          vr              # VIA Rhine, Rhine II
device          xl              # 3Com 3c90x (``Boomerang'', ``Cyclone'')
# Pseudo devices.
device          loop            # Network loopback
device          random          # Entropy device
device          ether           # Ethernet support
device          sl              # Kernel SLIP
device          ppp             # Kernel PPP
device          tun             # Packet tunnel.
device          pty             # Pseudo-ttys (telnet etc)
device          md              # Memory "disks"
device          gif             # IPv6 and IPv4 tunneling
device          bpf             # Berkeley packet filter
# USB support
device          uhci            # UHCI PCI->USB interface
device          ohci            # OHCI PCI->USB interface
device          ehci            # EHCI PCI->USB interface (USB 2.0)
device          usb             # USB Bus (required)
#device         udbp            # USB Double Bulk Pipe devices
device          ugen            # Generic
device          uhid            # "Human Interface Devices"
device          ukbd            # Keyboard
device          ulpt            # Printer
device          umass           # Disks/Mass storage - Requires scbus and da
device          ums             # Mouse
device          urio            # Diamond Rio 500 MP3 player
device          uscanner        # Scanners
device      ichwd
device          ichsmb
options     ENABLE_ALART
options         SC_DISABLE_REBOOT
device          smb
device          smbus
device      ppp
options     PPP_BSDCOMP
options     PPP_DEFLATE
options     PPP_FILTER
options     IPFIREWALL
options     IPFIREWALL_VERBOSE
options     IPFIREWALL_VERBOSE_LIMIT=100
# options    IPFIREWALL_DEFAULT_TO_ACCEPT
options     IPFIREWALL_FORWARD
options     IPFIREWALL_FORWARD_EXTENDED
options     IPDIVERT
options     IPSTEALTH
options     TCP_DROP_SYNFIN
options     DUMMYNET
options     BRIDGE
device          speaker
options         VESA
device          npx



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44E19FF2.9080709>