Date: Mon, 21 Aug 2006 15:39:47 +0100 From: Dominic Marks <dom@goodforbusiness.co.uk> To: "Patrick M. Hausen" <hausen@punkt.de> Cc: freebsd-stable@freebsd.org Subject: Re: ATA problems again ... general problem of ICH7 or ATA? Message-ID: <44E9C5B3.90604@goodforbusiness.co.uk> In-Reply-To: <20060821142613.GI45736@hugo10.ka.punkt.de> References: <20060821120052.0B25816A526@hub.freebsd.org> <200608211414.16731.matt@chronos.org.uk> <20060821132743.GC45736@hugo10.ka.punkt.de> <44E9B7C1.9010708@goodforbusiness.co.uk> <20060821142613.GI45736@hugo10.ka.punkt.de>
next in thread | previous in thread | raw e-mail | index | archive | help
Patrick M. Hausen wrote: > Hi, Dominic! > > On Mon, Aug 21, 2006 at 02:40:17PM +0100, Dominic Marks wrote: > >> hw.pci3.13.INTA.irq="17" >> >> The `13' value is the device number, you can find this in dmesg, same >> for pciN. > > So I tried this: > > em1: <Intel(R) PRO/1000 Network Connection Version - 6.0.5> port 0x5000-0x501f mem 0xdc180000-0xdc19ffff,0xdc100000-0xdc17ffff irq 17 at device 0.0 on pci5 > atapci1: <Intel ICH7 SATA300 controller> port 0x30e8-0x30ef,0x30dc-0x30df,0x30e0-0x30e7,0x30d8-0x30db,0x30b0-0x30bf mem 0xdc500400-0xdc5007ff irq 19 at device 31.2 on pci0 > > hw.pci0.31.2.INTA.irq="17" > > to force atapci1 to the same irq as em1. Didn't work. It's > still using 19. Any hints? I myself only learnt about this relatively recently, so afraid not. Have you checked that it doesnt work if you use hw.pci5 I'm just guessing here, but it might be worth a shot. Cheers, Dominic > Thanks, > > Patrick M. Hausen > Leiter Netzwerke und Sicherheit
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?44E9C5B3.90604>