Date: Sat, 16 Feb 2008 12:47:32 +0100 From: Johannes Dieterich <dieterich.joh@googlemail.com> To: freebsd-acpi@freebsd.org Subject: Re: [RFC] Patch to enable temperature ceiling in powerd Message-ID: <47B6CD54.3020806@gmail.com> In-Reply-To: <47B6CC48.5070009@gmail.com> References: <20080208045605.15C874500E@ptavv.es.net> <47ABF402.7030904@root.org> <1202475519.7014.7.camel@RabbitsDen> <yge1w7komar.wl%ume@mahoroba.org> <1203126071.833.19.camel@RabbitsDen> <47B6B913.9020505@gmail.com> <ygemyq1jge2.wl%ume@mahoroba.org> <47B6CC48.5070009@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hajimu UMEMOTO wrote: > Hi, > >>>>>> On Sat, 16 Feb 2008 11:21:07 +0100 >>>>>> Johannes Dieterich <dieterich.joh@googlemail.com> said: > dieterich.joh> Alexandre "Sunny" Kovalenko wrote: >> Johannes, >> >> since you were the only one who actually needed that patch to get >> through the buildworld, could you, please, set >> >> sysctl hw.acpi.thermal.tz1.passive_cooling=1 >> sysctl hw.acpi.thermal.user_override=1 >> sysctl hw.acpi.thermal.tz1._PSV=85C >> >> disable my patch by removing '-T and -z' from powerd_flags >> in /etc/rc.conf >> >> restart powerd, by doing >> >> /etc/rc.d/powerd restart >> >> and try to do the buildworld. If it works for you, I will kindly ask >> someone to close that PR and apologize for wasting everybody's time. > > dieterich.joh> Did that. Doesn't work. Again it is overheating. I have not tried the > dieterich.joh> patch from Hajimu Umemoto yet though. But I guess it will not change > dieterich.joh> much for me. > > I didn't see your report. Could you show me the output of > `sysctl hw.acpi' and `sysctl dev.cpu'? # sysctl hw.acpi hw.acpi.supported_sleep_state: S3 S4 S5 hw.acpi.power_button_state: S5 hw.acpi.sleep_button_state: S3 hw.acpi.lid_switch_state: NONE hw.acpi.standby_state: S1 hw.acpi.suspend_state: S3 hw.acpi.sleep_delay: 1 hw.acpi.s4bios: 0 hw.acpi.verbose: 0 hw.acpi.disable_on_reboot: 0 hw.acpi.handle_reboot: 0 hw.acpi.reset_video: 0 hw.acpi.cpu.cx_lowest: C2 hw.acpi.thermal.min_runtime: 0 hw.acpi.thermal.polling_rate: 10 hw.acpi.thermal.user_override: 0 hw.acpi.thermal.tz0.temperature: 62.0C hw.acpi.thermal.tz0.active: -1 hw.acpi.thermal.tz0.passive_cooling: 0 hw.acpi.thermal.tz0.thermal_flags: 0 hw.acpi.thermal.tz0._PSV: -1 hw.acpi.thermal.tz0._HOT: -1 hw.acpi.thermal.tz0._CRT: 127.0C hw.acpi.thermal.tz0._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.thermal.tz1.temperature: 63.0C hw.acpi.thermal.tz1.active: -1 hw.acpi.thermal.tz1.passive_cooling: 0 hw.acpi.thermal.tz1.thermal_flags: 0 hw.acpi.thermal.tz1._PSV: 92.5C hw.acpi.thermal.tz1._HOT: -1 hw.acpi.thermal.tz1._CRT: 97.0C hw.acpi.thermal.tz1._ACx: -1 -1 -1 -1 -1 -1 -1 -1 -1 -1 hw.acpi.battery.life: 96 hw.acpi.battery.time: -1 hw.acpi.battery.state: 0 hw.acpi.battery.units: 1 hw.acpi.battery.info_expire: 5 hw.acpi.acline: 1 # sysctl dev.cpu dev.cpu.0.%desc: ACPI CPU dev.cpu.0.%driver: cpu dev.cpu.0.%location: handle=\_PR_.CPU0 dev.cpu.0.%pnpinfo: _HID=none _UID=0 dev.cpu.0.%parent: acpi0 dev.cpu.0.temperature: 60 dev.cpu.0.freq: 125 dev.cpu.0.freq_levels: 1667/31000 1458/27125 1333/22000 1166/19250 1000/13000 875/11375 750/9750 625/8125 500/6500 375/4875 250/3250 125/1625 dev.cpu.0.cx_supported: C1/1 C2/1 C3/17 dev.cpu.0.cx_lowest: C2 dev.cpu.0.cx_usage: 0.00% 100.00% 0.00% dev.cpu.1.%desc: ACPI CPU dev.cpu.1.%driver: cpu dev.cpu.1.%location: handle=\_PR_.CPU1 dev.cpu.1.%pnpinfo: _HID=none _UID=0 dev.cpu.1.%parent: acpi0 dev.cpu.1.temperature: 62 dev.cpu.1.cx_supported: C1/1 C2/1 C3/17 dev.cpu.1.cx_lowest: C2 dev.cpu.1.cx_usage: 0.00% 100.00% 0.00% that is now the output without enabling Alexandre's patch. Hope it tells you something. Best regards, Johannes
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47B6CD54.3020806>