Date: Sat, 23 Feb 2008 13:34:54 +0100 From: Andrea Venturoli <ml@netfence.it> To: freebsd-questions@freebsd.org Subject: 6.3 DHCP and static_routes Message-ID: <47C012EE.6090006@netfence.it>
next in thread | raw e-mail | index | archive | help
Hello. This is part of my rc.conf: ifconfig_vr0="DHCP" static_routes="a b c" route_a="192.168.101.0/24 xxx" route_b="192.168.103.0/24 yyy" route_c="192.168.106.0/24 xxx" This used to work fine with 6.2, with the default route set up by the DHCP servers. After I upgraded to 6.3, I get no default route anymore. This is the relevant part of my logfile: Feb 23 11:16:38 zzz kernel: DHCPDISCOVER on vr0 to 255.255.255.255 port 67 interval 6 Feb 23 11:16:38 zzz kernel: Feb 23 11:16:38 zzz kernel: DHCPOFFER from 10.1.2.15 Feb 23 11:16:38 zzz kernel: Feb 23 11:16:38 zzz kernel: DHCPREQUEST on vr0 to 255.255.255.255 port 67 Feb 23 11:16:38 zzz kernel: Feb 23 11:16:38 zzz kernel: DHCPACK from 10.1.2.15 Feb 23 11:16:38 zzz kernel: Feb 23 11:16:38 zzz kernel: bound to 10.1.2.18 -- renewal in 1800 seconds. Feb 23 11:16:38 zzz kernel: Feb 23 11:16:38 zzz kernel: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 Feb 23 11:16:38 zzz kernel: inet 127.0.0.1 netmask 0xff000000 Feb 23 11:16:38 zzz kernel: vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 Feb 23 11:16:38 zzz kernel: options=8<VLAN_MTU> Feb 23 11:16:38 zzz kernel: inet 10.1.2.18 netmask 0xffffff00 broadcast 10.1.2.255 Feb 23 11:16:38 zzz kernel: ether 00:50:8d:63:65:ce Feb 23 11:16:38 zzz kernel: media: Ethernet autoselect (100baseTX <full-duplex>) Feb 23 11:16:38 zzz kernel: status: active Feb 23 11:16:38 zzz kernel: add net 192.168.101.0: gateway xxx Feb 23 11:16:38 zzz kernel: route: Feb 23 11:16:38 zzz kernel: writing to routing socket Feb 23 11:16:38 zzz kernel: : Feb 23 11:16:38 zzz kernel: File exists Feb 23 11:16:38 zzz kernel: add net 192.168.103.0: gateway yyy: route already in table Feb 23 11:16:38 zzz kernel: add net 192.168.106.0: gateway xxx Feb 23 11:16:38 zzz kernel: Additional routing options: Has anything changed? Anyone else experiencing a similar problem? Any suggestion? bye & Thanks av.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?47C012EE.6090006>