Date: Thu, 26 Feb 2009 22:05:29 +0200 From: Alexander Motin <mav@FreeBSD.org> To: Yoshihiro Ota <ota@j.email.ne.jp> Cc: FreeBSD Current <freebsd-current@freebsd.org> Subject: Re: Annoying whitenoise sound coming from snd_hda enabled chipset Message-ID: <49A6F609.20901@FreeBSD.org> In-Reply-To: <20090225211656.75c546c3.ota@j.email.ne.jp> References: <1235218982.00077642.1235207402@10.7.7.3> <499FFC5F.3020903@FreeBSD.org> <47d0403c0902210949i74473bc5j57c923e13c85e89@mail.gmail.com> <49A04510.5030405@FreeBSD.org> <alpine.GSO.1.10.0902211333260.28932@multics.mit.edu> <7d6fde3d0902211356h66b05cfcxf2ebbe9b2a6fd0f0@mail.gmail.com> <20090224004110.e4ad76f4.ota@j.email.ne.jp> <49A45127.3000108@FreeBSD.org> <20090225211656.75c546c3.ota@j.email.ne.jp>
next in thread | previous in thread | raw e-mail | index | archive | help
Yoshihiro Ota wrote: > On Tue, 24 Feb 2009 21:57:27 +0200 > Alexander Motin <mav@FreeBSD.org> wrote: >> Yoshihiro Ota wrote: >>> In my case, with hdac or pcm device, 8-CURRENT fails to boot very requentry. >>> It fails to prove a device and doesn't proceed farthar than that point. >>> Now it only boots once in 5 or 10 reboots. >>> >>> When it boots, it prints lots of following messages. >>> >>> hdac0: HDA Codec #0: Conexant CX20549 (Venice) >>> hdac0: unable to allocate widgets! >>> hdac0: unable to allocate widgets! >>> hdac0: unable to allocate widgets! >>> hdac0: unable to allocate widgets! >>> hdac0: unable to allocate widgets! >>> hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0 >>> hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0 >>> hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0 >>> hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0 >>> hdac0: hdac_command_send_internal: TIMEOUT numcmd=1, sent=1, received=0 >>> >>> I think this started happening about a week ago or so, sometime between >>> 13 and 16th. >> The only significant change last time was enabling MSI by default. But I >> don't think it should lead to such errors. I have tried even operation >> completely without interrupts working and there is not such errors. Can >> you send me complete verbose dmesg with the problem and `pciconf -lvc` >> output? >> >> Also you may try to disable MSI by setting 'hint.hdac.0.msi=0' hint. > > Once I disabled snd_hda_load="YES" in /boot/loader.conf, it comes up > all times. However, when I run "kldload snd_hda", the system stops responding, > i.e. crashes. > > So, now I added 'hint.hdac.0.msi="0"' in the hint; then, system comes up fine. > I tried "kldload snd_hda" and got the following output. > System didn't crash after adding the hint so that I added snd_hda_load="YES" > back to /boot/loader.conf. I have committed a patch to the CURRENT that should disable MSI for your HDA controller by default. Test it please. -- Alexander Motin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49A6F609.20901>