Date: Thu, 30 Apr 2009 22:16:21 -0400 From: Donald T Hayford <don@donhayford.com> To: freebsd-arm@freebsd.org Subject: Help with Marvel kernel for 88F6281 Message-ID: <49FA5B75.9090008@donhayford.com>
next in thread | raw e-mail | index | archive | help
I built FreeBSD-8 (current) kernel and world for the Marvel chipsets using the instructions here: http://wiki.freebsd.org/FreeBSDMarvell When I tried booting a Sheevaplug (Marvel 88F6281), the system hangs as soon as I start it: Restarting system. __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** MARVELL BOARD: SHEEVA PLUG LE U-Boot 1.1.4 (Mar 19 2009 - 16:06:59) Marvell version: 3.4.16 U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CEE80 Soc: 88F6281 A0 (DDR2) CPU running @ 1200Mhz L2 running @ 400Mhz SysClock = 400Mhz , TClock = 200Mhz DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6 DRAM CS[0] base 0x00000000 size 256MB DRAM CS[1] base 0x10000000 size 256MB DRAM Total size 512MB 16bit width Flash: 0 kB Addresses 8M - 0M are saved for the U-Boot usage. Mem malloc Initialization (8M - 7M): Done NAND:512 MB CPU : Marvell Feroceon (Rev 1) Streaming disabled Write allocate disabled USB 0: host mode PEX 0: interface detected no Link. Net: egiga0 [PRIME], egiga1 Hit any key to stop autoboot: 0 Marvell>> <INTERRUPT> Marvell>> dhcp BOOTP broadcast 1 DHCP client bound to address 192.168.1.246 Marvell>> tftpboot 0x900000 sheeva/6XXXkernel.bin Using egiga0 device TFTP from server 192.168.1.102; our IP address is 192.168.1.246 Filename 'sheeva/6XXXkernel.bin'. Load address: 0x900000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ################################################################# ######################################## done Bytes transferred = 2863204 (2bb064 hex) Marvell>> g 0x900000 This command can be used only if enaMonExt is set! Marvell>> go 0x900000 ## Starting application at 0x00900000 ... Then nothing more... Any help or suggestions would be greatly appreciated. Thanks, Don
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?49FA5B75.9090008>