Date: Sun, 28 Jun 2009 10:44:04 +0300 From: Alexander Motin <mav@FreeBSD.org> To: Mike Tancsa <mike@sentex.net> Cc: FreeBSD-Current <freebsd-current@freebsd.org>, scottl@freebsd.org Subject: Re: RFC: ATA to CAM integration patch Message-ID: <4A471F44.7010108@FreeBSD.org> In-Reply-To: <200906272303.n5RN3rTi070177@lava.sentex.ca> References: <4A4517BE.9040504@FreeBSD.org> <200906272303.n5RN3rTi070177@lava.sentex.ca>
next in thread | previous in thread | raw e-mail | index | archive | help
Mike Tancsa wrote: > No luck with an ICH10 board > > I did a buildworld/kernel > > > BTX loader 1.00 BTX version is 1.02 > Consoles: internal video/keyboard > BIOS drive C: is disk0 > BIOS 632kB/3136000kB available memory > > FreeBSD/i386 bootstrap loader, Revision 1.1 > (mdtancsa@i7.sentex.ca, Fri Jun 26 08:24:30 EDT 2009) > ** > > 28 ops 7 bypasses 93 hits 31 misses 1 flushes > Consoles: internal video/keyboard > BIOS drive C: is disk0 > BIOS 632kB/3136000kB available memory > > FreeBSD/i386 bootstrap loader, Revision 1.1 > (mdtancsa@i7.sentex.ca, Fri Jun 26 08:24:30 EDT 2009) > Can't work out which disk we are booting from. > Guessed BIOS device 0xffffffff not found by probes, defaulting to disk0: > > can't load 'kernel' > > Type '?' for a list of commands, 'help' for more detailed help. > OK > > OK lsdev > cd devices: > disk devices: > disk0: BIOS drive C: > pxe devices: > OK > > > OK ls > open '/' failed: input/output error > OK > > I tried with both a module and it built into the kernel > but no luck. putting it back into regular IDE mode allows it to boot > with the patched kernel I see no any relation to the patch here. I would say it is some BIOS/loader problem, as kernel wasn't yet booted. Have you been ever able to boot this system with AHCI enabled before? -- Alexander Motin
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4A471F44.7010108>