Date: Sun, 20 Sep 2009 20:20:30 +0400 From: Alex Keda <admin@lissyara.su> To: freebsd-acpi@freebsd.org Subject: acpi_hp - cannot adjustment backlight on Comapaq 6715s Message-ID: <4AB6564E.5000502@lissyara.su>
next in thread | raw e-mail | index | archive | help
Hi all! When I test acpi_hp first - it be patchset for current (8) All work OK Now, it part kernel sourses, and not working adjustment screen brightness (Fn+F9/Fn+F10). But, if I unplug power cord - lightness set to minimum. If I plug power cord - is go to maximum. HP# cat /dev/hpcmi Serial Port Enable Infrared Port Enable Parallel Port Enable Flash Media Reader Enable USB Ports including Express Card slot Enable 1394 Port Enable Cardbus Slot Enable Express Card Slot Disable F9, F10 and F12 Delay(Sec) 0 USB Device Detection Delay (Sec) 0 Multiboot Enable Express Boot Popup Delay(Sec) 0 CD-ROM Boot Enable Floppy Boot Enable Internal Network Adapter Boot Enable Internal Network Adapter Boot Mode PXE Swap Fn/Ctrl Key Disable USB Legacy Support Enable Parallel Port Mode Standard BIOS DMA Data Transfers Enable Fan Always on while on AC Power Disable Data Execution Prevention Disable LAN Power Saving Enable SATA Native Mode Disable Dual Core CPU Disable Secondary Battery Fast Charge Enable Windows Vista Direct App Launch Disable HDD Translation Mode LBA-assisted Virtualization Technology Enable USB HDD Translation Mode LBA-assisted Embedded WLAN Device Radio Enable Embedded WWAN Device Radio Enable Fingerprint Device Enable Optical Disk Drive Enable Network Interface Controller (LAN) Enable Ambient Light Sensor Disable Integrated Camera Disable Internal Modem Disable Embedded Bluetooth Device Radio Enable LAN/WLAN Switching Disable Wake on LAN Enable Stringent Security Disable Require Password On Restart Disable Smart Card Power-On Support Disable Reset of Embedded Security Device from OS Disable OS Management of Embedded Security Device Disable Activate Embedded Security On Next Boot Disable Embedded Security Activation Policy F1 to Boot Embedded Security Device Availability Available Power-On Authentication Support Disable Automatic Drivelock Support Disable Intel Active Management Technology Enable Terminal Emulation Mode ANSI USB Key Provisioning Support Enable Firmware Verbosity Enable Firmware Progress Event Support Enable HP# HP# sysctl dev.acpi_hp dev.acpi_hp.0.%desc: HP ACPI-WMI Mapping dev.acpi_hp.0.%driver: acpi_hp dev.acpi_hp.0.%location: handle=\_SB_.C011 dev.acpi_hp.0.%pnpinfo: _HID=PNP0C01 _UID=0 dev.acpi_hp.0.%parent: acpi0 dev.acpi_hp.0.wlan_enabled: 1 dev.acpi_hp.0.wlan_radio: 1 dev.acpi_hp.0.wlan_on_air: 1 dev.acpi_hp.0.wlan_enable_if_radio_on: 0 dev.acpi_hp.0.wlan_disable_if_radio_off: 0 dev.acpi_hp.0.bt_enabled: 1 dev.acpi_hp.0.bt_radio: 1 dev.acpi_hp.0.bt_on_air: 1 dev.acpi_hp.0.bt_enable_if_radio_on: 0 dev.acpi_hp.0.bt_disable_if_radio_off: 0 dev.acpi_hp.0.wwan_enabled: 1 dev.acpi_hp.0.wwan_radio: 1 dev.acpi_hp.0.wwan_on_air: 0 dev.acpi_hp.0.wwan_enable_if_radio_on: 0 dev.acpi_hp.0.wwan_disable_if_radio_off: 0 dev.acpi_hp.0.als_enabled: 4 dev.acpi_hp.0.display: 65793 dev.acpi_hp.0.hdd_temperature: 4 dev.acpi_hp.0.is_docked: 0 dev.acpi_hp.0.cmi_detail: 7 dev.acpi_hp.0.verbose: 1 HP#
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4AB6564E.5000502>