Date: Fri, 09 Apr 2010 01:39:16 -0600 From: "Erich Jenkins, Fuujin Group Ltd" <erich@fuujingroup.com> To: freebsd-net@freebsd.org Subject: Broadcom BCM5701 / HP NC6770 Message-ID: <4BBED9A4.3080303@fuujingroup.com>
next in thread | raw e-mail | index | archive | help
I just upgraded one of the lab boxes, an HP DL580-G3 with an NC6770 GigE fiber card to 7.0-REL, and noticed that this card no longer works: bge0@pci0:10:1:0: class=0x020000 card=0x00c10e11 chip=0x164514e4 rev=0x15 hdr=0x00 vendor = 'Broadcom Corporation' device = 'BCM5701 NetXtreme BCM5701 Gigabit Ethernet' class = network subclass = ethernet We were previously running 5.3 on this box (I know, VERY old), but never had a problem. The link now fails to come up. I've tried forcing the port out of auto (media 1000baseSX mediaopt full-duplex) and as long as the port doesn't have an IP assigned via rc.conf on system boot, I can get the switch to see it (Cisco 6505), but no traffic to flow. I've checked all the obvious things (duplex setting on switch, cable failure, etc.), all to no avail. I fiddled with the knobs in the driver (rxcsum, vlan_mtu, etc) with no changes either. Any input would be greatly appreciated. -- Erich M. Jenkins Fuujin Group Limited "You should never, never doubt what no one is sure about." -- Gene Wilder
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BBED9A4.3080303>