Skip site navigation (1)Skip section navigation (2)
Date:      Thu, 27 May 2010 00:10:46 +0800
From:      Ganbold <ganbold@gmail.com>
To:        PseudoCylon <moonlightakkiy@yahoo.ca>
Cc:        Ganbold Tsagaankhuu <ganbold@mobicom.mn>, freebsd-current@freebsd.org
Subject:   Re: CALL for TEST [HOSTAP] run(4) ralink usb wireless
Message-ID:  <4BFD4806.8070001@gmail.com>
In-Reply-To: <660085.11669.qm@web51802.mail.re2.yahoo.com>
References:  <16641.96608.qm@web51806.mail.re2.yahoo.com> <4B9FA3E0.4050702@micom.mng.net> <633929.41041.qm@web51802.mail.re2.yahoo.com> <4BA22B8D.9030700@micom.mng.net> <375331.74876.qm@web51804.mail.re2.yahoo.com> <4BA38B26.6050208@micom.mng.net> <989377.89740.qm@web51802.mail.re2.yahoo.com> <4BAE01AC.7000509@gmail.com> <623907.37074.qm@web51803.mail.re2.yahoo.com> <4BB3575D.4040506@gmail.com> <87836.79143.qm@web51804.mail.re2.yahoo.com> <4BBB372C.1060302@gmail.com> <665283.95271.qm@web51802.mail.re2.yahoo.com> <4BBDEC8F.9050803@gmail.com> <490521.32714.qm@web51804.mail.re2.yahoo.com> <4BD307DE.5080507@gmail.com> <332448.8676.qm@web51801.mail.re2.yahoo.com> <4BD3F2D4.8000007@gmail.com> <702632.81988.qm@web51803.mail.re2.yahoo.com> <4BDEE393.4080206@gmail.com> <660085.11669.qm@web51802.mail.re2.yahoo.com>

next in thread | previous in thread | raw e-mail | index | archive | help
AK-san,

Did you test run driver in bridge mode?

I have following setup:

# ifconfig
arge0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
0 mtu 1500
        options=80000<LINKSTATE>
        ether 00:15:6d:c1:c7:77
        inet 192.168.1.41 netmask 0xffffff00 broadcast 192.168.1.255
        media: Ethernet autoselect (100baseTX <full-duplex>)
        status: active
run0: flags=8a43<UP,BROADCAST,RUNNING,ALLMULTI,SIMPLEX,MULTICAST> metric
0 mtu 2290
        ether 00:22:cf:03:e0:30
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
        status: running
wlan0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> metric
0 mtu 1500
        ether 00:22:cf:03:e0:30
        inet 192.168.1.42 netmask 0xffffff00 broadcast 192.168.1.255
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11g <hostap>
        status: running
        ssid bsd channel 6 (2437 MHz 11g) bssid 00:22:cf:03:e0:30
        country US authmode WPA1+WPA2/802.11i privacy MIXED deftxkey 3
        TKIP 2:128-bit TKIP 3:128-bit txpower 0 scanvalid 60 protmode
CTS wme
        dtimperiod 1 -dfs
bridge0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu
1500
        ether 36:7d:f9:e1:56:c9
        inet 192.168.1.43 netmask 0xffffff00 broadcast 192.168.1.255
        id 00:15:6d:c1:c7:77 priority 32768 hellotime 2 fwddelay 15
        maxage 20 holdcnt 6 proto rstp maxaddr 100 timeout 1200
        root id 00:15:6d:c1:c7:77 priority 32768 ifcost 0 port 0
        member: arge0
flags=1e7<LEARNING,DISCOVER,STP,EDGE,AUTOEDGE,PTP,AUTOPTP>
                ifmaxaddr 0 port 1 priority 128 path cost 200000 proto rstp
                role designated state forwarding
        member: wlan0 flags=167<LEARNING,DISCOVER,STP,EDGE,AUTOEDGE,AUTOPTP>
                ifmaxaddr 0 port 9 priority 128 path cost 370370 proto rstp
                role designated state forwarding

It looks like either bridge or wlan/run driver is not
forwarding/allowing incoming arp request for wireless client behind this
access point.
Wireless client is not getting any arp request and after sending several
arp request to wireless client ADSL modem stops responding (had to
restart modem).
Any idea?

thanks,

Ganbold


PseudoCylon wrote:
> ----- Original Message ----
>   
>> From: Ganbold <ganbold@gmail.com>
>> To: PseudoCylon <moonlightakkiy@yahoo.ca>
>> Cc: freebsd-current@freebsd.org; Ganbold Tsagaankhuu <ganbold@mobicom.mn>
>> Sent: Mon, May 3, 2010 8:54:11 AM
>> Subject: Re: CALL for TEST [HOSTAP] run(4) ralink usb wireless
>>
>> Thanks a lot, works no problem so far here with bridge  (no
>> auth/hostapd/WPA2).
>>     
>
>   
>> rspro# uname -an FreeBSD rspro 9.0-CURRENT  FreeBSD 9.0-CURRENT #64 r207140M: Mon May  3
>> 21:49:50 ULAT 2010   
>> tsgan@beastie:/usr/obj/mips/usr/mysrc/sys/RSPRO_AR71XX  mips
>>     
>
>
> Yes! finally. I'm so happy to hear.
>
> If there are any other bugs, please report. I'll wait a few days before submit the changes just to make sure every thing is fine on your routerstation.
>
> Thank you for testing the driver several times and your patient.
>
> AK
>
>
>
>
>   


-- 
I wouldn't be so paranoid if you weren't all out to get me!!



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?4BFD4806.8070001>