Date: Tue, 24 May 2005 09:54:02 -0400 (EDT) From: "Jonathan M. Slivko" <freebsd-lists@slivko.org> To: freebsd-questions@freebsd.org Subject: 3Ware SATA RAID 8000 - Supported on 5.3-R? Message-ID: <50408.70.18.16.72.1116942842.squirrel@www.slivko.org>
next in thread | raw e-mail | index | archive | help
Hello, I have an interesting question, I have a Pentium 4 2.4Ghz (No HT Enabled), 2x80GB SATA Hard Drives in RAID 1. The box boots, works, etc. However, whenever you try and do an fsck -y, it says: root@bonjour(~)% fsck -y ** /dev/twed0s1a (NO WRITE) ** Last Mounted on / ** Root file system ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 2821 files, 31805 used, 474682 free (322 frags, 59295 blocks, 0.1% fragmentation) ** /dev/twed0s1g (NO WRITE) ** Last Mounted on /home ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 82057 files, 557735 used, 12912399 free (2343 frags, 1613757 blocks, 0.0% fragmentation) ** /dev/twed0s1d (NO WRITE) ** Last Mounted on /tmp ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 30 files, 1787 used, 504700 free (20 frags, 63085 blocks, 0.0% fragmentation) ** /dev/twed0s1e (NO WRITE) ** Last Mounted on /usr ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 251160 files, 1318908 used, 13912410 free (73346 frags, 1729883 blocks, 0.5% fragmentation) ** /dev/twed0s1f (NO WRITE) ** Last Mounted on /var ** Phase 1 - Check Blocks and Sizes ** Phase 2 - Check Pathnames ** Phase 3 - Check Connectivity ** Phase 4 - Check Reference Counts ** Phase 5 - Check Cyl groups 4424 files, 63321 used, 7042830 free (2462 frags, 880046 blocks, 0.0% fragmentation) The drives are Seagate SATA's (7200RPM) with a 3Ware SATA RAID Controller (8006-2LP) using the twe kernel driver. The drives themselves allow data to be read to/written from them, but fsck will not work (and is hanging things on boot). Anyone got any ideas? I looked at www.3ware.com earlier and it says that the 8006-2LP's support FreeBSD 4.x, but not 5.x - could this be a result of that, seeing as otherwise the drives/RAID work fine (AFAIK, it could not be and I'm just not sure how to test it). TIA, -- Jonathan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?50408.70.18.16.72.1116942842.squirrel>