Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 27 Feb 2013 12:09:28 +0100
From:      Miroslav Lachman <000.fbsd@quip.cz>
To:        pyunyh@gmail.com
Cc:        freebsd-net@freebsd.org
Subject:   Re: FreeBSD 9.1-RELEASE + bge0 == watchdog timeout
Message-ID:  <512DE968.4020409@quip.cz>
In-Reply-To: <20130227020123.GA3581@michelle.cdnetworks.com>
References:  <F02BE044-1C4F-43EB-8091-BC62362C2E5F@sd63.bc.ca> <D557DE29-DED8-4B89-9D1C-171FC17D435E@hub.org> <201302241106.42477.vegeta@tuxpowered.net> <20130225082042.GB1426@michelle.cdnetworks.com> <512CF97B.8030805@norma.perm.ru> <20130227020123.GA3581@michelle.cdnetworks.com>

next in thread | previous in thread | raw e-mail | index | archive | help
YongHyeon PYUN wrote:
> On Wed, Feb 27, 2013 at 12:05:47AM +0600, Eugene M. Zheganin wrote:

[...]

> bge(4)'s IPMI support for old controllers had many issues and
> didn't work well. Only some of users had luck to enjoy it. However
> IPMI support for 5717/5718/5719/5720 has no known issues and it
> should work. I also got a report that mentions IPMI does not work
> any more on 5715 after adding support for 5717/5718/5719/5720.
> The sanitized public data sheet does not mention IPMI interface so
> Linux tg3 would be the only source of information. Given that I
> don't have access to IPMI-capable controllers I have no idea when
> it could be fixed. Somebody with the IPMI-capable controllers have
> to sit down and verify all possible combinations.

I have a spare machine Sun Fire X2100 M2 with 5715C:

bge0@pci0:6:4:0:        class=0x020000 card=0x534c108e chip=0x167814e4 
rev=0xa3 hdr=0x00
     vendor     = 'Broadcom Corporation'
     device     = 'BCM5715C 10/100/100 PCIe Ethernet Controller'
     class      = network
     subclass   = ethernet
bge1@pci0:6:4:1:        class=0x020000 card=0x534c108e chip=0x167814e4 
rev=0xa3 hdr=0x00
     vendor     = 'Broadcom Corporation'
     device     = 'BCM5715C 10/100/100 PCIe Ethernet Controller'
     class      = network
     subclass   = ethernet

I can provide you full access to this machine (if you want) or let me 
know, what version I should check. Older versions (6.x - 8.3) are 
working fine with hw.bge.allow_asf="1" in loader.conf. I didn't test 
newer releases on these old machines.

Miroslav Lachman



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?512DE968.4020409>