Date: Tue, 05 Mar 2013 15:10:52 +0100 From: Johan Hendriks <joh.hendriks@gmail.com> To: freebsd-stable <freebsd-stable@freebsd.org> Subject: make_dev_physpath_alias Message-ID: <5135FCEC.7090105@gmail.com>
next in thread | raw e-mail | index | archive | help
Hello all.
I have a supermicro 16 bay box with a LSI 9211-8i card.
We use it for temp data storage, and we wanted to try the l4z compression.
After updating the source tree to r247839: and doing a make buildworld
cycle all works fine.
But at boot time we get some warnings.
make_dev_physpath_alias: WARNING - Unable to alias
gptid/281951f4-a996-11e1-83eb-00259061b51a to
enc@n500304800182f4fd/type@0/slot@1/elmdesc@Slot_01/gptid/281951f4-a996-11e1-83eb-00259061b51a
- path too long
Do i need to worry!!!
Gr
johan
Here is my full dmesg
Copyright (c) 1992-2013 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-STABLE #0 r247839: Tue Mar 5 13:17:25 CET 2013
root@backup.neuteboom.com:/usr/obj/usr/src/sys/KRNL amd64
CPU: Intel(R) Xeon(R) CPU E31220 @ 3.10GHz (3093.04-MHz K8-class CPU)
Origin = "GenuineIntel" Id = 0x206a7 Family = 0x6 Model = 0x2a
Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1fbae3ff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
AMD Features2=0x1<LAHF>
TSC: P-state invariant, performance statistics
real memory = 34359738368 (32768 MB)
avail memory = 33075630080 (31543 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <SUPERM SMCI--MB>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 2
cpu2 (AP): APIC ID: 4
cpu3 (AP): APIC ID: 6
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <SUPERM SMCI--MB> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 67, 1 (4) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 19 at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
mps0: <LSI SAS2008> port 0xe000-0xe0ff mem
0xf7600000-0xf7603fff,0xf7580000-0xf75bffff irq 19 at device 0.0 on pci1
mps0: Firmware: 15.00.00.00, Driver: 14.00.00.01-fbsd
mps0: IOCCapabilities:
1285c<ScsiTaskFull,DiagTrace,SnapBuf,EEDP,TransRetry,EventReplay,HostDisc>
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xf020-0xf03f mem
0xf7800000-0xf781ffff,0xf7825000-0xf7825fff irq 20 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:25:90:75:c8:09
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf7824000-0xf78243ff irq
16 at device 26.0 on pci0
usbus0: EHCI version 1.0
usbus0 on ehci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci3: <ACPI PCI bus> on pcib3
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0xd000-0xd01f mem
0xf7700000-0xf771ffff,0xf7720000-0xf7723fff irq 16 at device 0.0 on pci3
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: 00:25:90:75:c8:08
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf7823000-0xf78233ff irq
23 at device 29.0 on pci0
usbus1: EHCI version 1.0
usbus1 on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci4: <ACPI PCI bus> on pcib4
vgapci0: <VGA-compatible display> mem
0xf5000000-0xf5ffffff,0xf7000000-0xf7003fff,0xf6800000-0xf6ffffff irq 19
at device 3.0 on pci4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port
0xf070-0xf077,0xf060-0xf063,0xf050-0xf057,0xf040-0xf043,0xf000-0xf01f
mem 0xf7822000-0xf78227ff irq 19 at device 31.2 on pci0
ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich4: <AHCI channel> at channel 4 on ahci0
ahcich5: <AHCI channel> at channel 5 on ahci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_button0: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart2: <16550 or compatible> port 0x3e8-0x3ef irq 10 on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xc7fff,0xce000-0xcefff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ses0 at mps0 bus 0 scbus0 target 8 lun 0
ses0: <LSI CORP SAS2X28 0717> Fixed Enclosure Services SCSI-5 device
ses0: 600.000MB/s transfers
ses0: Command Queueing enabled
ses0: SCSI-3 ENC Device
ses0: probe9,pass1,da0: Element descriptor: 'Slot 01'
ses0: probe9,pass1,da0: SAS Device Slot Element: 1 Phys at Slot 0
ses0: phy 0: SATA device
ses0: phy 0: parent 500304800182f4ff addr 500304800182f4ec
ses0: probe10,pass2,da1: Element descriptor: 'Slot 02'
ses0: probe10,pass2,da1: SAS Device Slot Element: 1 Phys at Slot 1
ses0: phy 0: SATA device
ses0: phy 0: parent 500304800182f4ff addr 500304800182f4ed
ses0: probe11,pass3,da2: Element descriptor: 'Slot 03'
ses0: probe11,pass3,da2: SAS Device Slot Element: 1 Phys at Slot 2
ses0: phy 0: SATA device
ses0: phy 0: parent 500304800182f4ff addr 500304800182f4ee
ses0: probe12,pass4,da3: Element descriptor: 'Slot 04'
ses0: probe12,pass4,da3: SAS Device Slot Element: 1 Phys at Slot 3
ses0: phy 0: SATA device
ses0: phy 0: parent 500304800182f4ff addr 500304800182f4ef
ses0: probe13,pass5,da4: Element descriptor: 'Slot 05'
ses0: probe13,pass5,da4: SAS Device Slot Element: 1 Phys at Slot 4
ses0: phy 0: SATA device
ses0: phy 0: parent 500304800182f4ff addr 500304800182f4f0
ses0: probe14,pass6,da5: Element descriptor: 'Slot 06'
ses0: probe14,pass6,da5: SAS Device Slot Element: 1 Phys at Slot 5
ses0: phy 0: SATA device
ses0: phy 0: parent 500304800182f4ff addr 500304800182f4f1
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1546522006 Hz quality 1000
da4 at mps0 bus 0 scbus0 target 13 lun 0
da4: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
da4: 600.000MB/s transfers
da4: Command Queueing enabled
da4: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da3 at mps0 bus 0 scbus0 target 12 lun 0
da3: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
da3: 600.000MB/s transfers
da3: Command Queueing enabled
da3: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da0 at mps0 bus 0 scbus0 target 9 lun 0
da0: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
da0: 600.000MB/s transfers
da0: Command Queueing enabled
da0: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da5 at mps0 bus 0 scbus0 target 14 lun 0
da5: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
da5: 600.000MB/s transfers
da5: Command Queueing enabled
da5: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da2 at mps0 bus 0 scbus0 target 11 lun 0
da2: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
da2: 600.000MB/s transfers
da2: Command Queueing enabled
da2: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
da1 at mps0 bus 0 scbus0 target 10 lun 0
da1: <ATA WDC WD20EARX-00P AB51> Fixed Direct Access SCSI-6 device
da1: 600.000MB/s transfers
da1: Command Queueing enabled
da1: 1907729MB (3907029168 512 byte sectors: 255H 63S/T 243201C)
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
make_dev_physpath_alias: WARNING - Unable to alias
gptid/281951f4-a996-11e1-83eb-00259061b51a to
enc@n500304800182f4fd/type@0/slot@1/elmdesc@Slot_01/gptid/281951f4-a996-11e1-83eb-00259061b51a
- path too long
make_dev_physpath_alias: WARNING - Unable to alias
gptid/87f6d404-a997-11e1-83eb-00259061b51a to
enc@n500304800182f4fd/type@0/slot@2/elmdesc@Slot_02/gptid/87f6d404-a997-11e1-83eb-00259061b51a
- path too long
make_dev_physpath_alias: WARNING - Unable to alias
gptid/affdfc28-a997-11e1-83eb-00259061b51a to
enc@n500304800182f4fd/type@0/slot@3/elmdesc@Slot_03/gptid/affdfc28-a997-11e1-83eb-00259061b51a
- path too long
make_dev_physpath_alias: WARNING - Unable to alias
gptid/c8eab51d-a997-11e1-83eb-00259061b51a to
enc@n500304800182f4fd/type@0/slot@4/elmdesc@Slot_04/gptid/c8eab51d-a997-11e1-83eb-00259061b51a
- path too long
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus0
ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus1
make_dev_physpath_alias: WARNING - Unable to alias
gptid/e4b1f963-a997-11e1-83eb-00259061b51a to
enc@n500304800182f4fd/type@0/slot@5/elmdesc@Slot_05/gptid/e4b1f963-a997-11e1-83eb-00259061b51a
- path too long
make_dev_physpath_alias: WARNING - Unable to alias
gptid/faa2b1ca-a997-11e1-83eb-00259061b51a to
enc@n500304800182f4fd/type@0/slot@6/elmdesc@Slot_06/gptid/faa2b1ca-a997-11e1-83eb-00259061b51a
- path too long
Root mount waiting for: usbus1 usbus0
uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen0.3: <Winbond Electronics Corp> at usbus0
ums0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,
rev 1.10/0.01, addr 3> on usbus0
ums0: 3 buttons and [Z] coordinates ID=0
ukbd0: <Winbond Electronics Corp Hermon USB hidmouse Device, class 0/0,
rev 1.10/0.01, addr 3> on usbus0
kbd2 at ukbd0
Trying to mount root from ufs:/dev/ada0p2 [rw]...
em0: link state changed to UP
thanks all
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5135FCEC.7090105>