Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 06 Jan 2014 17:07:34 +0200
From:      Alexandr <shuriku@shurik.kiev.ua>
To:        Adrian Chadd <adrian@freebsd.org>
Cc:        "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org>
Subject:   Re: Problem connecting to AP
Message-ID:  <52CAC6B6.8090007@shurik.kiev.ua>
In-Reply-To: <CAJ-Vmo=QgE7BXEAj_omdfJaweqzy_LooNzZTdPEPfD5ahY4%2B9w@mail.gmail.com>
References:  <52CAB6F2.3010707@shurik.kiev.ua>	<CAJ-Vmok0JFLBemBOrB0YUnJ0OkJQEwuh1Mg75W52zWxXYrDpvg@mail.gmail.com>	<52CABD82.2070106@shurik.kiev.ua>	<CAJ-VmokuY5Tk_D=wQCGGw1t%2B4TJCzqDWQ6gyHOpz0==qY%2BfZaA@mail.gmail.com>	<52CAC368.3000105@shurik.kiev.ua>	<CAJ-Vmo=Q8yjDfB4wF1kiQv0eJs2esGVuqcSvAy20qqNZSJxCcA@mail.gmail.com> <CAJ-Vmo=QgE7BXEAj_omdfJaweqzy_LooNzZTdPEPfD5ahY4%2B9w@mail.gmail.com>

next in thread | previous in thread | raw e-mail | index | archive | help
Yes, just now it works in 11n-only. But I tried switch it to bgn-mixed,
g-only, n-only - no luck.

/var/log/dmesg.today:

wlan0: [54:e6:fc:e4:48:c4] recv auth frame with algorithm 0 seq 2
wlan0: link state changed to UP
wlan0: [54:e6:fc:e4:48:c4] recv deauthenticate (reason 2)
wlan0: link state changed to DOWN

/var/log/messages:

Jan  6 17:05:03 thinkpad wpa_supplicant[27113]: wlan0: Trying to
associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz)
Jan  6 17:05:03 thinkpad wpa_supplicant[27113]: wlan0: Associated with
54:e6:fc:e4:48:c4
Jan  6 17:05:06 thinkpad wpa_supplicant[27113]: wlan0:
CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0
Jan  6 17:05:17 thinkpad wpa_supplicant[27113]: wlan0: Trying to
associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz)
Jan  6 17:05:17 thinkpad wpa_supplicant[27113]: wlan0: Associated with
54:e6:fc:e4:48:c4
Jan  6 17:05:20 thinkpad wpa_supplicant[27113]: wlan0:
CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0

06.01.2014 16:56, Adrian Chadd пишет:
> .. and is the AP locked down to 11n only or something?
>
>
> -a
>
> On 6 January 2014 06:55, Adrian Chadd <adrian@freebsd.org> wrote:
>> Whta's logged in dmesg?
>>
>>
>> -a
>>
>> On 6 January 2014 06:53, Alexandr <shuriku@shurik.kiev.ua> wrote:
>>> Ок, I changed key to "secretsecretsecret", the same error - WPA: 4-Way
>>> Handshake failed - pre-shared key may be incorrect.
>>>
>>> <3>Trying to associate with 54:e6:fc:e4:48:c4 (SSID='door' freq=2412 MHz)
>>> <3>Associated with 54:e6:fc:e4:48:c4
>>> <3>CTRL-EVENT-DISCONNECTED bssid=54:e6:fc:e4:48:c4 reason=0
>>> <3>WPA: 4-Way Handshake failed - pre-shared key may be incorrect
>>> <3>CTRL-EVENT-SSID-TEMP-DISABLED id=0 ssid="door" auth_failures=8
>>> duration=30
>>>
>>> But it successfully connects to my android phone:
>>>
>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>>         ether 68:5d:43:92:3a:88
>>>         inet 192.168.1.227 netmask 0xffffff00 broadcast 192.168.1.255
>>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>         media: IEEE 802.11 Wireless Ethernet MCS mode 11ng
>>>         status: associated
>>>         ssid htc channel 6 (2437 MHz 11g ht/20) bssid 84:7a:88:c9:25:ce
>>>         country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>>>         AES-CCM 2:128-bit txpower 15 bmiss 10 scanvalid 60 bgscan
>>>         bgscanintvl 300 bgscanidle 250 roam:rssi 7 roam:rate 64 protmode CTS
>>>         ampdulimit 16k -amsdutx amsdurx shortgi wme roaming MANUAL
>>>
>>>
>>> May be it AP-related problem? But why other devices works (laptop with
>>> opensuse and different android devices)
>>>
>>> 06.01.2014 16:43, Adrian Chadd пишет:
>>>> You still need a longer password, psk isn't WPA long. Try secretsecretsecret.
>>>>
>>>>
>>>> -a
>>>>
>>>> On 6 January 2014 06:28, Alexandr <shuriku@shurik.kiev.ua> wrote:
>>>>> I simply changed key in this listing to "secret". Yes, I tried a very
>>>>> simple configuration, no luck:
>>>>>
>>>>> network={
>>>>> ssid="door"
>>>>> psk="secret"
>>>>> }
>>>>>
>>>>>
>>>>> 06.01.2014 16:24, Adrian Chadd пишет:
>>>>>> The passphrase 'secret' is too short for WPA.
>>>>>>
>>>>>> I gather it's not _that_, but is it long enough to meet WPA reuirements?
>>>>>>
>>>>>> Have you tried removing the proto= and bssid lines? You don't strictly
>>>>>> need them.
>>>>>>
>>>>>> Thanks!
>>>>>>
>>>>>> -a
>>>>>>
>>>>>>
>>>>>> On 6 January 2014 06:00, Alexandr <shuriku@shurik.kiev.ua> wrote:
>>>>>>> Hello,
>>>>>>>
>>>>>>> I recently upgraded system on my laptop to current with a hope to get my
>>>>>>> wireless card working. Now it successfully recognized by kernel:
>>>>>>>
>>>>>>> iwn0: <Intel Centrino Wireless-N 2230> mem 0xf2d00000-0xf2d01fff irq 17
>>>>>>> at device 0.0 on pci3
>>>>>>>
>>>>>>> Unfortunately, I can't connect to my home access point:
>>>>>>>
>>>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-DISCONNECTED
>>>>>>> bssid=54:e6:fc:e4:48:c4 reason=0
>>>>>>> wpa_supplicant[519]: wlan0: WPA: 4-Way Handshake failed - pre-shared key
>>>>>>> may be incorrect
>>>>>>> wpa_supplicant[519]: wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=0
>>>>>>> ssid="door" auth_failures=10 duration=30
>>>>>>>
>>>>>>> I tried different security settings (WPA-WPA2 + AES-TKIP), wireless
>>>>>>> modes, radio channels on my access point, the same error.
>>>>>>>
>>>>>>> # ifconfig wlan0
>>>>>>> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
>>>>>>>         ether 68:5d:43:92:3a:88
>>>>>>>         nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
>>>>>>>         media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
>>>>>>>         status: no carrier
>>>>>>>         ssid door channel 1 (2412 MHz 11g ht/40+)
>>>>>>>         country US authmode WPA2/802.11i privacy ON deftxkey UNDEF
>>>>>>> txpower 13
>>>>>>>         bmiss 10 scanvalid 60 bgscan bgscanintvl 300 bgscanidle 250
>>>>>>>         roam:rssi 7 roam:rate 64 protmode CTS ampdulimit 8k -amsdutx amsdurx
>>>>>>>         shortgi wme roaming MANUAL
>>>>>>>
>>>>>>> /etc/wpa_supplicant.conf:
>>>>>>>
>>>>>>>         ctrl_interface=/var/run/wpa_supplicant
>>>>>>>         ctrl_interface_group=wheel
>>>>>>>         eapol_version=2
>>>>>>>
>>>>>>> network={
>>>>>>>         ssid="door"
>>>>>>>         bssid=54:e6:fc:e4:48:c4
>>>>>>>         key_mgmt=WPA-PSK
>>>>>>>         proto=WPA RSN
>>>>>>>         psk="secret"
>>>>>>> }
>>>>>>>
>>>>>>>
>>>>>>> Other home devices connets to AP without problems. Can you point me how
>>>>>>> I can debug it?
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> freebsd-wireless@freebsd.org mailing list
>>>>>>> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
>>>>>>> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?52CAC6B6.8090007>