Date: Fri, 14 Mar 2014 08:42:24 +0100 From: Hans Petter Selasky <hps@bitfrost.no> To: Admin <admin@allunix.ru>, freebsd-usb@freebsd.org Subject: Re: VIA Cardbus USB Message-ID: <5322B2E0.7090905@bitfrost.no> In-Reply-To: <5322AE1E.6020407@allunix.ru> References: <5322AE1E.6020407@allunix.ru>
next in thread | previous in thread | raw e-mail | index | archive | help
On 03/14/14 08:22, Admin wrote: > Hello all. > > I have a two-port PCMCIA USB 2.0 card exactly like this: > > http://i01.i.aliimg.com/wsphoto/v0/371216405/PCMCIA-to-font-b-USB-b-font-font-b-2-0-b-font-font-b-Cardbus.jpg > > > It works in Linux for my USB mouse and keyboard, so now I am trying to > use it in FreeBSD. > > This is how it is detected by pciconf -lv: > > uhci0@pci0:7:0:0: class=0x0c0300 card=0x30381106 chip=0x30381106 > rev=0x61 hdr=0x00 > vendor = 'VIA Technologies, Inc.' > device = 'VT82xxxxx UHCI USB 1.1 Controller' > class = serial bus > subclass = USB > uhci1@pci0:7:0:1: class=0x0c0300 card=0x30381106 chip=0x30381106 > rev=0x61 hdr=0x00 > vendor = 'VIA Technologies, Inc.' > device = 'VT82xxxxx UHCI USB 1.1 Controller' > class = serial bus > subclass = USB > ehci0@pci0:7:0:2: class=0x0c0320 card=0x31041106 chip=0x31041106 > rev=0x63 hdr=0x00 > vendor = 'VIA Technologies, Inc.' > device = 'USB 2.0' > class = serial bus > subclass = USB > > And this is what I see during boot: > > Copyright (c) 1992-2013 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 10.0-RC3 #2: Wed Feb 12 16:18:02 NOVT 2014 > root@AcerAspire:/usr/obj/usr/src/sys/GENERIC i386 > FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 > CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.04-MHz 686-class > CPU) > Origin = "AuthenticAMD" Id = 0x40f82 Family = 0xf Model = 0x48 > Stepping = 2 > Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> > > Features2=0x2001<SSE3,CX16> > AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> > AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> > real memory = 3221225472 (3072 MB) > avail memory = 2743922688 (2616 MB) > Event timer "LAPIC" quality 400 > ACPI APIC Table: <PTLTD APIC > > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs > FreeBSD/SMP: 1 package(s) x 2 core(s) > cpu0 (BSP): APIC ID: 0 > cpu1 (AP): APIC ID: 1 > MADT: Forcing active-low polarity and level trigger for SCI > ioapic0 <Version 2.1> irqs 0-23 on motherboard > kbd1 at kbdmux0 > random: <Software, Yarrow> initialized > acpi0: <PTLTD RSDT> on motherboard > acpi0: Power Button (fixed) > acpi0: reservation of 0, 1000 (3) failed > cpu0: <ACPI CPU> on acpi0 > cpu1: <ACPI CPU> on acpi0 > atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 > Event timer "RTC" frequency 32768 Hz quality 0 > attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 > Timecounter "i8254" frequency 1193182 Hz quality 0 > attimer0: Can't map interrupt. > Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 > acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 > acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 > acpi_lid0: <Control Method Lid Switch> on acpi0 > acpi_button0: <Power Button> on acpi0 > acpi_button1: <Sleep Button> on acpi0 > pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 > pci0: <ACPI PCI bus> on pcib0 > pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 > pci1: <ACPI PCI bus> on pcib1 > vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem > 0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 17 at device 5.0 on pci1 > vgapci0: Boot video device > pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 > pcib2: failed to allocate initial I/O port window: 0-0xfff > pcib2: failed to allocate initial memory window: 0-0xfffff > pcib2: failed to allocate initial prefetch window: 0-0xfffff > pci2: <ACPI PCI bus> on pcib2 > pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 > pcib3: failed to allocate initial I/O port window: 0-0xfff > pcib3: failed to allocate initial memory window: 0-0xfffff > pci4: <ACPI PCI bus> on pcib3 > pci0: <serial bus, SMBus> at device 20.0 (no driver attached) > atapci0: <ATI IXP400 UDMA133 controller> port > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 > on pci0 > ata0: <ATA channel> at channel 0 on atapci0 > ata1: <ATA channel> at channel 1 on atapci0 > hdac0: <ATI SB450 HDA Controller> mem 0xc0000000-0xc0003fff irq 16 at > device 20.2 on pci0 > hdac0: Device stuck in reset > isab0: <PCI-ISA bridge> at device 20.3 on pci0 > isa0: <ISA bus> on isab0 > pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 > pci6: <ACPI PCI bus> on pcib4 > rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem > 0xc0210000-0xc02100ff irq 21 at device 1.0 on pci6 > miibus0: <MII bus> on rl0 > rlphy0: <RealTek internal media interface> PHY 0 on miibus0 > rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > rl0: Ethernet address: 00:16:d4:55:3d:e8 > ath0: <Atheros 2413> mem 0xc0200000-0xc020ffff irq 22 at device 2.0 on pci6 > ath0: AR2413 mac 7.8 RF2413 phy 4.5 > ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0056 > cbb0: <PCI-CardBus Bridge> mem 0xc0211000-0xc0211fff irq 20 at device > 4.0 on pci6 > cardbus0: <CardBus bus> on cbb0 > pccard0: <16-bit PCCard bus> on cbb0 > pci6: <memory, flash> at device 4.1 (no driver attached) > sdhci_pci0: <ENE CB712 SD> mem 0xc0210800-0xc02108ff irq 23 at device > 4.2 on pci6 > sdhci_pci0: 1 slot(s) allocated > pci6: <memory, flash> at device 4.3 (no driver attached) > sdhci_pci1: <ENE CB712 SD 2> at device 4.4 on pci6 > sdhci_pci1: 1 slot(s) allocated > acpi_tz0: <Thermal Zone> on acpi0 > atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 > atkbd0: <AT Keyboard> irq 1 on atkbdc0 > kbd0 at atkbd0 > atkbd0: [GIANT-LOCKED] > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: [GIANT-LOCKED] > psm0: model Generic PS/2 mouse, device ID 0 > battery0: <ACPI Control Method Battery> on acpi0 > acpi_acad0: <AC Adapter> on acpi0 > pmtimer0 on isa0 > orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid > ORM0000 on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > ppc0: parallel port not found. > powernow0: <PowerNow! K8> on cpu0 > powernow1: <PowerNow! K8> on cpu1 > Timecounters tick every 1.000 msec > random: unblocking device. > cardbus0: Expecting link target, got 0xff > cardbus0: Expecting link target, got 0xff > uhci0: <VIA 83C572 USB controller> port 0xa100-0xa11f irq 20 at device > 0.0 on cardbus0 > ada0 at ata0 bus 0 scbus0 target 0 lun 0 > ada0: <ST98823A 3.06> ATA-6 device > ada0: Serial Number 5PK2AD2Y > ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) > ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) > ada0: Previously was known as ad0 > cd0 at ata0 bus 0 scbus0 target 1 lun 0 > cd0: <PIONEER DVD-RW DVR-K16RS 1.35> Removable CD-ROM SCSI-0 device > cd0: Serial Number FIDL384431WL > cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) > cd0: cd present [1131986 x 2048 byte records] > SMP: AP CPU #1 Launched! > usbus0: controller did not reset > usbus0 on uhci0 > usbus0: 12Mbps Full Speed USB v1.0 > cardbus0: Expecting link target, got 0xff > cardbus0: Expecting link target, got 0xff > uhci1: <VIA 83C572 USB controller> port 0xa120-0xa13f irq 20 at device > 0.1 on cardbus0 > ugen0.1: <VIA> at usbus0 > uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > usbus1: controller did not reset > usbus1 on uhci1 > usbus1: 12Mbps Full Speed USB v1.0 > cardbus0: Expecting link target, got 0xff > cardbus0: Expecting link target, got 0xff > ehci0: <VIA VT6202 USB 2.0 controller> mem 0xc0212000-0xc02120ff irq 20 > at device 0.2 on cardbus0 > ehci0: VIA-quirk applied > usbus2: EHCI version 1.0 > ugen1.1: <VIA> at usbus1 > uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > uhci_interrupt: resume detect > uhci_interrupt: host system error > uhci_interrupt: host controller process error > uhci_interrupt: resume detect > uhci_interrupt: host system error > uhci_interrupt: host controller process error > usbus2 on ehci0 > usbus2: 480Mbps High Speed USB v2.0 > ugen2.1: <VIA> at usbus2 > uhub2: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > uhub0: 2 ports with 2 removable, self powered > uhub1: 2 ports with 2 removable, self powered > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub2: 4 ports with 4 removable, self powered > uhci_interrupt: resume detect > uhci_interrupt: host system error > uhci_interrupt: host controller process error > uhci_interrupt: resume detect > uhci_interrupt: host system error > uhci_interrupt: host controller process error > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhci_interrupt: resume detect > uhci_interrupt: host system error > uhci_interrupt: host controller process error > uhci_interrupt: resume detect > uhci_interrupt: host system error > uhci_interrupt: host controller process error > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > Trying to mount root from ufs:/dev/ada0p2 [rw]... > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > wlan0: Ethernet address: 00:16:cf:89:cf:e0 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT > uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 > > > I see that when nothing is plugged in those USB ports on the card. > > When I plug something in (like keyboard and mouse), it is not detected > and does not work. > > usbconfig just hangs, not reacting to ctrl+c until I unplug the card. > Then it unhags and states the right EHCI device. > > Where should I start looking? Hi, This might sound like an IRQ problem, that the device is not generating any interrupts. You can fake interrupts by using a timer/callout to see if that is the real problem. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5322B2E0.7090905>