Date: Fri, 14 Mar 2014 15:08:39 +0700 From: Admin <admin@allunix.ru> To: Hans Petter Selasky <hps@bitfrost.no>, freebsd-usb@freebsd.org Subject: Re: VIA Cardbus USB Message-ID: <5322B907.6070506@allunix.ru> In-Reply-To: <5322B2E0.7090905@bitfrost.no> References: <5322AE1E.6020407@allunix.ru> <5322B2E0.7090905@bitfrost.no>
next in thread | previous in thread | raw e-mail | index | archive | help
14.03.2014 14:42, Hans Petter Selasky пишет: > On 03/14/14 08:22, Admin wrote: >> Hello all. >> >> I have a two-port PCMCIA USB 2.0 card exactly like this: >> >> http://i01.i.aliimg.com/wsphoto/v0/371216405/PCMCIA-to-font-b-USB-b-font-font-b-2-0-b-font-font-b-Cardbus.jpg >> >> >> >> It works in Linux for my USB mouse and keyboard, so now I am trying to >> use it in FreeBSD. >> >> This is how it is detected by pciconf -lv: >> >> uhci0@pci0:7:0:0: class=0x0c0300 card=0x30381106 chip=0x30381106 >> rev=0x61 hdr=0x00 >> vendor = 'VIA Technologies, Inc.' >> device = 'VT82xxxxx UHCI USB 1.1 Controller' >> class = serial bus >> subclass = USB >> uhci1@pci0:7:0:1: class=0x0c0300 card=0x30381106 chip=0x30381106 >> rev=0x61 hdr=0x00 >> vendor = 'VIA Technologies, Inc.' >> device = 'VT82xxxxx UHCI USB 1.1 Controller' >> class = serial bus >> subclass = USB >> ehci0@pci0:7:0:2: class=0x0c0320 card=0x31041106 chip=0x31041106 >> rev=0x63 hdr=0x00 >> vendor = 'VIA Technologies, Inc.' >> device = 'USB 2.0' >> class = serial bus >> subclass = USB >> >> And this is what I see during boot: >> >> Copyright (c) 1992-2013 The FreeBSD Project. >> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 >> The Regents of the University of California. All rights reserved. >> FreeBSD is a registered trademark of The FreeBSD Foundation. >> FreeBSD 10.0-RC3 #2: Wed Feb 12 16:18:02 NOVT 2014 >> root@AcerAspire:/usr/obj/usr/src/sys/GENERIC i386 >> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610 >> CPU: AMD Turion(tm) 64 X2 Mobile Technology TL-50 (1596.04-MHz 686-class >> CPU) >> Origin = "AuthenticAMD" Id = 0x40f82 Family = 0xf Model = 0x48 >> Stepping = 2 >> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT> >> >> >> Features2=0x2001<SSE3,CX16> >> AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!> >> AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8> >> real memory = 3221225472 (3072 MB) >> avail memory = 2743922688 (2616 MB) >> Event timer "LAPIC" quality 400 >> ACPI APIC Table: <PTLTD APIC > >> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs >> FreeBSD/SMP: 1 package(s) x 2 core(s) >> cpu0 (BSP): APIC ID: 0 >> cpu1 (AP): APIC ID: 1 >> MADT: Forcing active-low polarity and level trigger for SCI >> ioapic0 <Version 2.1> irqs 0-23 on motherboard >> kbd1 at kbdmux0 >> random: <Software, Yarrow> initialized >> acpi0: <PTLTD RSDT> on motherboard >> acpi0: Power Button (fixed) >> acpi0: reservation of 0, 1000 (3) failed >> cpu0: <ACPI CPU> on acpi0 >> cpu1: <ACPI CPU> on acpi0 >> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 >> Event timer "RTC" frequency 32768 Hz quality 0 >> attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 >> Timecounter "i8254" frequency 1193182 Hz quality 0 >> attimer0: Can't map interrupt. >> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 >> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x8008-0x800b on acpi0 >> acpi_ec0: <Embedded Controller: GPE 0x10> port 0x62,0x66 on acpi0 >> acpi_lid0: <Control Method Lid Switch> on acpi0 >> acpi_button0: <Power Button> on acpi0 >> acpi_button1: <Sleep Button> on acpi0 >> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 >> pci0: <ACPI PCI bus> on pcib0 >> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0 >> pci1: <ACPI PCI bus> on pcib1 >> vgapci0: <VGA-compatible display> port 0x9000-0x90ff mem >> 0xc8000000-0xcfffffff,0xc0100000-0xc010ffff irq 17 at device 5.0 on pci1 >> vgapci0: Boot video device >> pcib2: <ACPI PCI-PCI bridge> at device 4.0 on pci0 >> pcib2: failed to allocate initial I/O port window: 0-0xfff >> pcib2: failed to allocate initial memory window: 0-0xfffff >> pcib2: failed to allocate initial prefetch window: 0-0xfffff >> pci2: <ACPI PCI bus> on pcib2 >> pcib3: <ACPI PCI-PCI bridge> at device 5.0 on pci0 >> pcib3: failed to allocate initial I/O port window: 0-0xfff >> pcib3: failed to allocate initial memory window: 0-0xfffff >> pci4: <ACPI PCI bus> on pcib3 >> pci0: <serial bus, SMBus> at device 20.0 (no driver attached) >> atapci0: <ATI IXP400 UDMA133 controller> port >> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x8410-0x841f irq 16 at device 20.1 >> on pci0 >> ata0: <ATA channel> at channel 0 on atapci0 >> ata1: <ATA channel> at channel 1 on atapci0 >> hdac0: <ATI SB450 HDA Controller> mem 0xc0000000-0xc0003fff irq 16 at >> device 20.2 on pci0 >> hdac0: Device stuck in reset >> isab0: <PCI-ISA bridge> at device 20.3 on pci0 >> isa0: <ISA bus> on isab0 >> pcib4: <ACPI PCI-PCI bridge> at device 20.4 on pci0 >> pci6: <ACPI PCI bus> on pcib4 >> rl0: <RealTek 8139 10/100BaseTX> port 0xa000-0xa0ff mem >> 0xc0210000-0xc02100ff irq 21 at device 1.0 on pci6 >> miibus0: <MII bus> on rl0 >> rlphy0: <RealTek internal media interface> PHY 0 on miibus0 >> rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto >> rl0: Ethernet address: 00:16:d4:55:3d:e8 >> ath0: <Atheros 2413> mem 0xc0200000-0xc020ffff irq 22 at device 2.0 >> on pci6 >> ath0: AR2413 mac 7.8 RF2413 phy 4.5 >> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0056 >> cbb0: <PCI-CardBus Bridge> mem 0xc0211000-0xc0211fff irq 20 at device >> 4.0 on pci6 >> cardbus0: <CardBus bus> on cbb0 >> pccard0: <16-bit PCCard bus> on cbb0 >> pci6: <memory, flash> at device 4.1 (no driver attached) >> sdhci_pci0: <ENE CB712 SD> mem 0xc0210800-0xc02108ff irq 23 at device >> 4.2 on pci6 >> sdhci_pci0: 1 slot(s) allocated >> pci6: <memory, flash> at device 4.3 (no driver attached) >> sdhci_pci1: <ENE CB712 SD 2> at device 4.4 on pci6 >> sdhci_pci1: 1 slot(s) allocated >> acpi_tz0: <Thermal Zone> on acpi0 >> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 >> atkbd0: <AT Keyboard> irq 1 on atkbdc0 >> kbd0 at atkbd0 >> atkbd0: [GIANT-LOCKED] >> psm0: <PS/2 Mouse> irq 12 on atkbdc0 >> psm0: [GIANT-LOCKED] >> psm0: model Generic PS/2 mouse, device ID 0 >> battery0: <ACPI Control Method Battery> on acpi0 >> acpi_acad0: <AC Adapter> on acpi0 >> pmtimer0 on isa0 >> orm0: <ISA Option ROMs> at iomem 0xc0000-0xcefff,0xcf000-0xcffff pnpid >> ORM0000 on isa0 >> sc0: <System console> at flags 0x100 on isa0 >> sc0: VGA <16 virtual consoles, flags=0x300> >> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on >> isa0 >> ppc0: parallel port not found. >> powernow0: <PowerNow! K8> on cpu0 >> powernow1: <PowerNow! K8> on cpu1 >> Timecounters tick every 1.000 msec >> random: unblocking device. >> cardbus0: Expecting link target, got 0xff >> cardbus0: Expecting link target, got 0xff >> uhci0: <VIA 83C572 USB controller> port 0xa100-0xa11f irq 20 at device >> 0.0 on cardbus0 >> ada0 at ata0 bus 0 scbus0 target 0 lun 0 >> ada0: <ST98823A 3.06> ATA-6 device >> ada0: Serial Number 5PK2AD2Y >> ada0: 100.000MB/s transfers (UDMA5, PIO 8192bytes) >> ada0: 76319MB (156301488 512 byte sectors: 16H 63S/T 16383C) >> ada0: Previously was known as ad0 >> cd0 at ata0 bus 0 scbus0 target 1 lun 0 >> cd0: <PIONEER DVD-RW DVR-K16RS 1.35> Removable CD-ROM SCSI-0 device >> cd0: Serial Number FIDL384431WL >> cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes) >> cd0: cd present [1131986 x 2048 byte records] >> SMP: AP CPU #1 Launched! >> usbus0: controller did not reset >> usbus0 on uhci0 >> usbus0: 12Mbps Full Speed USB v1.0 >> cardbus0: Expecting link target, got 0xff >> cardbus0: Expecting link target, got 0xff >> uhci1: <VIA 83C572 USB controller> port 0xa120-0xa13f irq 20 at device >> 0.1 on cardbus0 >> ugen0.1: <VIA> at usbus0 >> uhub0: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 >> usbus1: controller did not reset >> usbus1 on uhci1 >> usbus1: 12Mbps Full Speed USB v1.0 >> cardbus0: Expecting link target, got 0xff >> cardbus0: Expecting link target, got 0xff >> ehci0: <VIA VT6202 USB 2.0 controller> mem 0xc0212000-0xc02120ff irq 20 >> at device 0.2 on cardbus0 >> ehci0: VIA-quirk applied >> usbus2: EHCI version 1.0 >> ugen1.1: <VIA> at usbus1 >> uhub1: <VIA UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 >> uhci_interrupt: resume detect >> uhci_interrupt: host system error >> uhci_interrupt: host controller process error >> uhci_interrupt: resume detect >> uhci_interrupt: host system error >> uhci_interrupt: host controller process error >> usbus2 on ehci0 >> usbus2: 480Mbps High Speed USB v2.0 >> ugen2.1: <VIA> at usbus2 >> uhub2: <VIA EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 >> uhub0: 2 ports with 2 removable, self powered >> uhub1: 2 ports with 2 removable, self powered >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub2: 4 ports with 4 removable, self powered >> uhci_interrupt: resume detect >> uhci_interrupt: host system error >> uhci_interrupt: host controller process error >> uhci_interrupt: resume detect >> uhci_interrupt: host system error >> uhci_interrupt: host controller process error >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhci_interrupt: resume detect >> uhci_interrupt: host system error >> uhci_interrupt: host controller process error >> uhci_interrupt: resume detect >> uhci_interrupt: host system error >> uhci_interrupt: host controller process error >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> Trying to mount root from ufs:/dev/ada0p2 [rw]... >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> wlan0: Ethernet address: 00:16:cf:89:cf:e0 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> uhub_reattach_port: port 1 reset failed, error=USB_ERR_TIMEOUT >> uhub_reattach_port: device problem (USB_ERR_TIMEOUT), disabling port 1 >> >> >> I see that when nothing is plugged in those USB ports on the card. >> >> When I plug something in (like keyboard and mouse), it is not detected >> and does not work. >> >> usbconfig just hangs, not reacting to ctrl+c until I unplug the card. >> Then it unhags and states the right EHCI device. >> >> Where should I start looking? > > Hi, > > This might sound like an IRQ problem, that the device is not > generating any interrupts. You can fake interrupts by using a > timer/callout to see if that is the real problem. > > -- Thanks for the reply! I thought of that, yes, but... do I have to hack a scheduler or something? I'm not shure how this could be done.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5322B907.6070506>