Date: Mon, 16 Jun 2014 11:07:35 +0200 From: Hans Petter Selasky <hps@selasky.org> To: Matthias Apitz <guru@unixarea.de> Cc: freebsd-usb@freebsd.org Subject: Re: Fwd: USB to parallel for printer HP LaserJet 4mL Message-ID: <539EB3D7.7040802@selasky.org> In-Reply-To: <20140616083302.GA1790@La-Habana> References: <20140610054403.GA1589@La-Habana> <539964AB.1030909@selasky.org> <20140613184921.GA1748@La-Habana> <539BEE2E.9050108@selasky.org> <20140614181138.GA1598@La-Habana> <539C9181.10304@selasky.org> <20140616054141.GA1358@La-Habana> <539E87EF.9080404@selasky.org> <20140616065050.GA1552@La-Habana> <539E94C5.50405@selasky.org> <20140616083302.GA1790@La-Habana>
next in thread | previous in thread | raw e-mail | index | archive | help
On 06/16/14 10:33, Matthias Apitz wrote: > El día Monday, June 16, 2014 a las 08:55:01AM +0200, Hans Petter Selasky escribió: > >> Hi, >> >> If you disconnect the LPT port from the printer and repeat? >> >> Is the device sufficiently powered? > > Hi, > > I did: > > # kldunload ulpt.ko > # kldload modules/usb/ulpt/ulpt.ko > # sysctl hw.usb.ulpt.debug=15 > hw.usb.ulpt.debug: 0 -> 15 > > now I power-cycled the printer, let it print the self test page, plug'ed > in the cable into the printers parallel port, plug'ed in the USB end > into the laptop, and: > Run the command _before_ plugging the printer cable. --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?539EB3D7.7040802>