Skip site navigation (1)Skip section navigation (2)
Date:      Fri, 20 Mar 2015 15:44:15 -0700
From:      Motty Cruz <motty.cruz@gmail.com>
To:        Rainer Duffner <rainer@ultra-secure.de>
Cc:        freebsd-fs@freebsd.org
Subject:   Re: zfs on FreeBSD 8.2 64bit stuck in "One or more devices is currently being resilvered"
Message-ID:  <550CA2BF.2070406@gmail.com>
In-Reply-To: <CE29CC44-FCB8-4D8F-B5E1-4CE7384F90B2@ultra-secure.de>
References:  <550C8D1A.3070402@gmail.com> <550C938F.70500@gmail.com> <986BB4BF-D960-46EE-8E15-6FC5A5B6D219@ultra-secure.de> <550C9E70.60501@gmail.com> <CE29CC44-FCB8-4D8F-B5E1-4CE7384F90B2@ultra-secure.de>

next in thread | previous in thread | raw e-mail | index | archive | help
Can you describe what you did to replace the disk?

I sure can. I had spare hdd in the pool.
#zpool replace tank label/004 label/007b

  	    label/003             ONLINE       0     0     0
  	    replacing             DEGRADED     0     0     0
  	      433419809408607751  UNAVAIL      0     0     0  was/dev/label/007
  	      label/004           ONLINE       0     0     0  2.47T resilvered
  	    label/005             ONLINE       0     0     0

after two days of resilvering, the server became unresponsive. I reboot the server started to resilver again. after that I also
detached bad disk.
#zpool detach tank 433419809408607751

I have tried zpool clear tank but no success,

Thanks,
Motty
On 03/20/2015 03:32 PM, Rainer Duffner wrote:
>> Am 20.03.2015 um 23:25 schrieb Motty Cruz <motty.cruz@gmail.com>:
>>
>> Hello Rainer,
>>
>> a disk went bad, I had to replace it, soon after replacing the bad HDD it started the "resilver" process. Process went on and on for hours, unfortunately server stop responding, I was force to reboot. after rebooting started "resilver" process again, from zero. I put the HDD offline replace it "thinking it was a factory bad HHD" started the "resilver" process again.
>>
>
> I would assume that the ZFS still thinks it’s the old disk somehow.
> This is what usually happens then.
>
>
> I’m not sure if an upgraded FreeBSD will help you with your resilver-problem.
>
> Can you describe what you did to replace the disk?
>
>
>




Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?550CA2BF.2070406>