Date: Sun, 14 Jun 2015 20:57:43 +0200 From: Hans Petter Selasky <hps@selasky.org> To: Mihai Vintila <unixro@gmail.com>, freebsd-infiniband@freebsd.org Subject: Re: Ib0 not working unless i unload ipoib and load it again. Message-ID: <557DCEA7.3030703@selasky.org> In-Reply-To: <557DCA80.50203@gmail.com> References: <557C79D8.8040403@gmail.com> <557C7D94.9020207@selasky.org> <557DCA80.50203@gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi, On 06/14/15 20:40, Mihai Vintila wrote: > Another strange issue. Is that i have: > /boot/loader.conf > mlx4_core="YES" > ibcore_load="YES" > mlxen_load="YES" > mlx4ib_load="YES" > ipoib_load="YES" If you remove this line from sysctl.conf and run it from the command line instead, does it work then? > > and in sysctl.conf > sys.device.mlx4_core0.mlx4_port1=ib > > Only when it boots ib0 is not functional. From what i've noticed if > after mlx4_core0 is up i remove ipoib module and add it again it's working. > > Bellow is a small output from dmesg in which i unload/load ipoib at boot > in rc.local and interface still doesn't work and after port is up i do > it manually and it starts working: > ib0: Attached to mlx4_0 port 1 > ums0: <vendor 0x0557 product 0x2419, class 0/0, rev 1.10/1.00, addr 2> > on usbus0 > ums0: 3 buttons and [Z] coordinates ID=0 > ib0: link state changed to DOWN > ib0: Attached to mlx4_0 port 1 > mlx4_core0: mlx4_ib: Port 1 logical link is up > ib0: link state changed to DOWN > ib0: Attached to mlx4_0 port 1 > ib0: link state changed to UP > > > in ifconfig only difference is a new lladdr for ib0. > --HPS
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?557DCEA7.3030703>