Date: Sun, 2 Aug 2015 21:34:34 -0400 From: Adam McDougall <mcdouga9@egr.msu.edu> To: freebsd-stable@freebsd.org Subject: Re: 4TB Western Digital My Book 1230 USB hard drive not working on 10.2 Message-ID: <55BEC52A.6080901@egr.msu.edu> In-Reply-To: <410CF5C1-2BF7-45E8-9707-12F26C4D62A1@gromit.dlib.vt.edu> References: <410CF5C1-2BF7-45E8-9707-12F26C4D62A1@gromit.dlib.vt.edu>
next in thread | previous in thread | raw e-mail | index | archive | help
On 08/02/2015 21:22, Paul Mather wrote: > I have a 4TB external USB drive (Western Digital My Book 1230) that I am trying to use under FreeBSD/amd64 10.2 (10.2-PRERELEASE #0 r286052: Wed Jul 29 20:59:39 EDT 2015). This system has a MSI 760GMA-P34 (FX) motherboard. > > The drive probes unreliably when plugged in to a USB 3 port. It reliably probes when plugged into a USB 2 port. However, it works in neither cases. Attempting to dd from the drive results in a "dd: /dev/da0: Invalid argument". > > When plugged in to a USB 2 port, this is how the drive is probed: > > ugen6.2: <Western Digital> at usbus6 > umass0: <Western Digital My Book 1230, class 0/0, rev 2.10/10.65, addr 2> on usbus6 > umass0: SCSI over Bulk-Only; quirks = 0xc001 > umass0:9:0:-1: Attached to scbus9 > da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 > da0: <WD My Book 1230 1065> Fixed Direct Access SPC-4 SCSI device > da0: Serial Number 57434334453056594A4C4A4A > da0: 40.000MB/s transfers > da0: 3815415MB (976746240 4096 byte sectors: 255H 63S/T 60799C) > da0: quirks=0x2<NO_6_BYTE> > ses0 at umass-sim0 bus 0 scbus9 target 0 lun 1 > ses0: <WD SES Device 1065> Fixed Enclosure Services SPC-4 SCSI device > ses0: Serial Number 57434334453056594A4C4A4A > ses0: 40.000MB/s transfers > ses0: SCSI-3 ENC Device > > When booting with it connected to a USB 3 port, this is what is output: > > xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfeafe000-0xfeafffff irq 18 at device 0.0 on pci3 > xhci0: 64 bytes context size, 64-bit DMA > usbus0 on xhci0 > [[...]] > ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fe000-0xfe7fefff irq 16 at device 18.0 on pci0 > usbus1 on ohci0 > ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fd000-0xfe7fdfff irq 16 at device 18.1 on pci0 > usbus2 on ohci1 > ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff800-0xfe7ff8ff irq 17 at device 18.2 on pci0 > usbus3: EHCI version 1.0 > usbus3 on ehci0 > ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7fc000-0xfe7fcfff irq 18 at device 19.0 on pci0 > usbus4 on ohci2 > ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7f7000-0xfe7f7fff irq 18 at device 19.1 on pci0 > usbus5 on ohci3 > ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfe7ff400-0xfe7ff4ff irq 19 at device 19.2 on pci0 > usbus6: EHCI version 1.0 > usbus6 on ehci1 > [[...]] > ohci4: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfe7f6000-0xfe7f6fff irq 18 at device 20.5 on pci0 > usbus7 on ohci4 > [[...]] > usbus0: 5.0Gbps Super Speed USB v3.0 > usbus1: 12Mbps Full Speed USB v1.0 > usbus2: 12Mbps Full Speed USB v1.0 > usbus3: 480Mbps High Speed USB v2.0 > usbus4: 12Mbps Full Speed USB v1.0 > usbus5: 12Mbps Full Speed USB v1.0 > usbus6: 480Mbps High Speed USB v2.0 > usbus7: 12Mbps Full Speed USB v1.0 > ugen7.1: <ATI> at usbus7 > uhub0: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7 > ugen6.1: <ATI> at usbus6 > uhub1: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6 > ugen5.1: <ATI> at usbus5 > uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5 > ugen4.1: <ATI> at usbus4 > uhub3: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4 > ugen3.1: <ATI> at usbus3 > uhub4: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3 > ugen2.1: <ATI> at usbus2 > uhub5: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2 > ugen1.1: <ATI> at usbus1 > uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen0.1: <0x1912> at usbus0 > uhub7: <0x1912 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 > uhub0: 2 ports with 2 removable, self powered > uhub2: 3 ports with 3 removable, self powered > uhub3: 3 ports with 3 removable, self powered > uhub5: 3 ports with 3 removable, self powered > uhub6: 3 ports with 3 removable, self powered > uhub7: 8 ports with 8 removable, self powered > [[...]] > Root mount waiting for: usbus6 usbus3 usbus0 > Root mount waiting for: usbus6 usbus3 usbus0 > uhub1: 6 ports with 6 removable, self powered > uhub4: 6 ports with 6 removable, self powered > ugen0.2: <vendor 0x1058> at usbus0 > umass0: <vendor 0x1058 product 0x1230, class 0/0, rev 3.00/10.65, addr 1> on usbus0 > umass0: SCSI over Bulk-Only; quirks = 0x8000 > Root mount waiting for: usbus0 > [[...]] > Root mount waiting for: usbus0 > Root mount waiting for: usbus0 > umass0: Get Max Lun not supported (USB_ERR_TIMEOUT) > umass0:9:0:-1: Attached to scbus9 > [[...]] > da0 at umass-sim0 bus 0 scbus9 target 0 lun 0 > da0: < > Fixed Direct Access SCSI device > da0: Serial Number WCC4E0VYJLJJ > da0: 400.000MB/s transfers > da0: 3815415MB (976746240 4096 byte sectors: 255H 63S/T 60799C) > da0: quirks=0x2<NO_6_BYTE> > > > This external USB drive works fine under OSX Yosemite and also when plugged in to my Raspberry Pi 2 running OSMC. > > Is there anyone using this model of USB drive under FreeBSD/amd64 10.2? Is it a matter of finding the correct quirk to get it working? > > Cheers, > > Paul. The trouble detecting is probably related to https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=196332 I have trouble with my 2T WD "My passport" but I did not create a bug report because I found the one above which didn't get a reply. As far as "dd: /dev/da0: Invalid argument", did you supply a bs= argument to dd? I noticed: "da0: 3815415MB (976746240 4096 byte sectors" which means it is reporting as a 4k drive and it will reject 512 byte IO requests like dd would use without bs=. I ran into that issue when I was testing some old FC drives formatted for 520 byte sectors for ECC instead of 512.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?55BEC52A.6080901>