Date: Wed, 02 Sep 2015 18:30:56 +0200 From: Per olof Ljungmark <peo@intersonic.se> To: freebsd-scsi@freebsd.org Subject: da2:ciss1:0:0:0): Periph destroyed Message-ID: <55E72440.8070507@intersonic.se>
next in thread | raw e-mail | index | archive | help
Hi, Recent 10-STABLE, HP D2600 with 12 SATA drives in RAID10 via a P812 controller, 7TB capacity as one volume, ZFS. If I pull a drive from the array, the following occurs and I am not sure about the logic here because the array is still intact and no data loss occurs. Despite that the volume is gone. # zpool clear imap cannot clear errors for imap: I/O error # zpool online imap da2 cannot online da2: pool I/O is currently suspended Only a reboot helped and then the pool came up just fine, no errors, but that is not exactly what you want on a production box. Did I miss something? Would geli_autodetach="NO" help? syslog output: Sep 2 17:55:19 <kern.crit> str kernel: ciss1: *** Hot-plug drive removed, Port=1E Box=1 Bay=2 SN= Z4Z2S9SD Sep 2 17:55:19 <kern.crit> str kernel: ciss1: *** Physical drive failure, Port=1E Box=1 Bay=2 Sep 2 17:55:19 <kern.crit> str kernel: ciss1: *** State change, logical drive 0, new state=REGENING Sep 2 17:55:19 <kern.crit> str kernel: ciss1: logical drive 0 (da2) changed status OK->interim recovery, spare status 0x21<configured> Sep 2 17:55:19 <kern.crit> str kernel: ciss1: *** State change, logical drive 0, new state=NEEDS_REBUILD Sep 2 17:55:19 <kern.crit> str kernel: ciss1: logical drive 0 (da2) changed status interim recovery->ready for recovery, spare status 0x11<configured,available> Sep 2 17:55:19 <kern.crit> str kernel: da2 at ciss1 bus 0 scbus2 target 0 lun 0 Sep 2 17:55:19 <kern.crit> str kernel: da2: <HP RAID 1(1+0) read> s/n PAGXQ0BRH1W0WA detached Sep 2 17:55:19 <kern.crit> str kernel: (da2:ciss1:0:0:0): Periph destroyed Sep 2 17:55:19 <user.notice> str devd: Executing 'logger -p kern.notice -t ZFS 'vdev is removed, pool_guid=13539160044045520113 vdev_guid=1325849881310347579'' Sep 2 17:55:19 <user.notice> str ZFS: vdev is removed, pool_guid=13539160044045520113 vdev_guid=1325849881310347579 Sep 2 17:55:19 <kern.crit> str kernel: (da2:ciss1:0:0:0): fatal error, could not acquire reference count Sep 2 17:55:23 <kern.crit> str kernel: ciss1: *** State change, logical drive 0, new state=REBUILDING Sep 2 17:55:23 <kern.crit> str kernel: ciss1: logical drive 0 (da2) changed status ready for recovery->recovering, spare status 0x13<configured,rebuilding,available> Sep 2 17:55:23 <kern.crit> str kernel: cam_periph_alloc: attempt to re-allocate valid device da2 rejected flags 0x18 refcount 1 Sep 2 17:55:23 <kern.crit> str kernel: daasync: Unable to attach to new device due to status 0x6
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?55E72440.8070507>