Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 13 Dec 2015 16:09:25 -0553.75
From:      "William A. Mahaffey III" <wam@hiwaay.net>
To:        FreeBSD X11 mailing list <freebsd-x11@freebsd.org>
Subject:   Re: problems booting w/ X11 ati driver
Message-ID:  <566DEB4B.5050808@hiwaay.net>
In-Reply-To: <566DCCFA.3060301@b1t.name>
References:  <566D9A13.9050208@hiwaay.net> <566DCCFA.3060301@b1t.name>

next in thread | previous in thread | raw e-mail | index | archive | help
This is a multi-part message in MIME format.
--------------050004050907060201030300
Content-Type: text/plain; charset=windows-1252; format=flowed
Content-Transfer-Encoding: 7bit

On 12/13/15 14:00, Volodymyr Kostyrko wrote:
> On 13.12.2015 18:15, William A. Mahaffey III wrote:
>>
>>
>> I tried activating use of the X11 ati (also radeon) driver this A.M. I
>> also did a full pkg upgrade & freebsd-update. When I rebooted,
>> everything went AOK. When I logged in, my setup starts XFCE by default
>> from .xinitrc (IIRC). I also had drm_load & radeonkms_load activated in
>> my /boot/loader.conf file. The drm & radeon modules didn't get started
>> up correctly & X11 wouldn't start, see 1st attached. I commented out the
>> drm & radeon lines in my loader.conf & rebooted & tried again. Still
>> nogo, see 2nd attached. I also tried setting my driver to ati & radeon,
>> w/ no loader loads, still nogo. I went back to my stock xorg.conf, using
>> vesa driver & got logged in AOK as always, see 3rd attached. My
>> xorg.conf is a bit cluttered from various attempts to get other stuff
>> working (vbox, etc.), but w/ VESA driver starts XFCE AOK. My hardware is
>> visible in the xorg.conf file, uname below.
>
> Please attach the output of `dmesg` after you try it with radeon. The 
> words "Failed to load kernel module for pci:0000:00:01.0: Exec format 
> error" mostly look like a problem with loading a kernel module. You 
> don't need to preload any modules from `loader.conf` - Xorg will try 
> load everything it would need anyway. And `dmesg` will show what goes 
> on when modules are initialized.
>
>> Is my CPU/APU supported for the ati or radeon driver (even if not full
>> 3D) ? The wiki implies not, but doesn't specifically mention my combo,
>> so I ask. TIA & have a good one.
>
> Well yes, wiki states that it's not supported. On the other hand wiki 
> mentions the full list of what you can provide to check what was the 
> problem for those devices: https://wiki.freebsd.org/Graphics#Reporting


Yeah, sorry for not being more methodical. I rebooted 3-4 times in 
fairly quick succession, however, I *think* I have dmesg output from the 
above scenario, see attached. If you want any of the other stuff 
mentioned, just ask.


-- 

	William A. Mahaffey III

  ----------------------------------------------------------------------

	"The M1 Garand is without doubt the finest implement of war
	 ever devised by man."
                            -- Gen. George S. Patton Jr.


--------------050004050907060201030300
Content-Type: text/plain; charset=UTF-8;
 name="LIST.dmesg.Dec2015.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: attachment;
 filename="LIST.dmesg.Dec2015.txt"

Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xffb00000-0xffb3ffff irq 44 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9840) HDA Controller> mem 0xffb64000-0xffb67fff irq 45 at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xffa00000-0xffa001ff irq 28 at device 0.0 on pci1
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xff900000-0xff900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: d0:50:99:13:e3:85
pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xff800000-0xff807fff irq 36 at device 0.0 on pci3
xhci0: 32 byte context size.
usbus0 on xhci0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xffb68000-0xffb69fff irq 18 at device 16.0 on pci0
xhci1: 32 byte context size.
usbus1 on xhci1
ahci1: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xffb6e000-0xffb6e3ff irq 19 at device 17.0 on pci0
ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ohci0: <OHCI (generic) USB controller> mem 0xffb6d000-0xffb6dfff irq 18 at device 18.0 on pci0
usbus2 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffb6c000-0xffb6c0ff irq 17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xffb6b000-0xffb6bfff irq 18 at device 19.0 on pci0
usbus4 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xffb6a000-0xffb6a0ff irq 17 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xffb60000-0xffb63fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5
acpi_button0: <Power Button> on acpi0
ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0
ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xcf000-0xd6fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x2a7 offMax=0x587
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm3: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <0x1b21> at usbus0
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1022> at usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <AMD> at usbus2
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <AMD> at usbus3
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <AMD> at usbus4
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <AMD> at usbus5
uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada0: Serial Number JR10006PGYH08E
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada1: Serial Number JR10006PGYD6ZE
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada2: Serial Number JR10006PGYTR8E
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada3: Serial Number JR10006PGYK1YE
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1297591135 Hz quality 1000
uhub2: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
GEOM_STRIPE: Device home_str created (id=3106945155).
GEOM_STRIPE: Disk ada0p4 attached to home_str.
GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Device usr_str created (id=3573821994).
GEOM_STRIPE: Disk ada1p3 attached to usr_str.
GEOM_STRIPE: Disk ada1p4 attached to home_str.
GEOM_STRIPE: Disk ada2p3 attached to usr_str.
GEOM_STRIPE: Disk ada2p4 attached to home_str.
GEOM_STRIPE: Disk ada3p3 attached to usr_str.
GEOM_STRIPE: Device stripe/usr_str activated.
GEOM_STRIPE: Disk ada3p4 attached to home_str.
GEOM_STRIPE: Device stripe/home_str activated.
GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
Root mount waiting for: usbus5 usbus3
uhub5: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
ugen4.2: <USB> at usbus4
ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4
kbd2 at ukbd0
ums0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4
ums0: 3 buttons and [XYZ] coordinates ID=3
Root mount waiting for: usbus3
ugen3.2: <MUSHKIN> at usbus3
umass0: <MUSHKIN MKNUFDPR4GB, class 0/0, rev 2.00/1.00, addr 2> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:4:0:-1: Attached to scbus4
Trying to mount root from ufs:/dev/ada0p3 [rw]...
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <MUSHKIN MKNUFDPR4GB PMAP> Removable Direct Access SCSI-6 device 
da0: Serial Number C500545DB516E726
da0: 40.000MB/s transfers
da0: 3699MB (7575552 512 byte sectors: 255H 63S/T 471C)
da0: quirks=0x2<NO_6_BYTE>
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 fe 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(da0:umass-sim0:0:0:0): Error 22, Unretryable error
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 fe 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(da0:umass-sim0:0:0:0): Error 22, Unretryable error
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(da0:umass-sim0:0:0:0): Error 22, Unretryable error
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(da0:umass-sim0:0:0:0): Error 22, Unretryable error
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(da0:umass-sim0:0:0:0): Error 22, Unretryable error
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(da0:umass-sim0:0:0:0): Error 22, Unretryable error
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(da0:umass-sim0:0:0:0): Error 22, Unretryable error
ugen4.3: <Kensington> at usbus4
(da0:umass-sim0:0:0:0): READ(10). CDB: 28 00 00 73 97 ff 00 00 01 00 
(da0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(da0:umass-sim0:0:0:0): SCSI status: Check Condition
(da0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:21,0 (Logical block address out of range)
(da0:umass-sim0:0:0:0): Error 22, Unretryable error
ums1: <Kensington Kensington PilotMouse Laser - 6 Button, class 0/0, rev 1.10/2.20, addr 3> on usbus4
ums1: 6 buttons and [XYZT] coordinates ID=0
GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17).
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
module_register: module drmn/drm_iic_dp_aux already exists!
Module drmn/drm_iic_dp_aux failed to register: 17
module_register: module drmn already exists!
Module drmn failed to register: 17
KLD radeonkms_port.ko: depends on drmn_port - not available or version mismatch
linker_load_file: Unsupported file type
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...8 8 2 2 2 2 1 1 1 1 0 0 0 done
All buffers synced.
Uptime: 8m12s
usbus0: Controller shutdown
uhub0: at usbus0, port 1, addr 1 (disconnected)
usbus0: Controller shutdown complete
usbus1: Controller shutdown
uhub1: at usbus1, port 1, addr 1 (disconnected)
usbus1: Controller shutdown complete
usbus2: Controller shutdown
uhub2: at usbus2, port 1, addr 1 (disconnected)
usbus2: Controller shutdown complete
usbus3: Controller shutdown
uhub3: at usbus3, port 1, addr 1 (disconnected)
ugen3.2: <MUSHKIN> at usbus3 (disconnected)
umass0: at uhub3, port 3, addr 2 (disconnected)
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <MUSHKIN MKNUFDPR4GB PMAP> s/n C500545DB516E726 detached
(da0:umass-sim0:0:0:0): Periph destroyed
usbus3: Controller shutdown complete
usbus4: Controller shutdown
uhub4: at usbus4, port 1, addr 1 (disconnected)
ugen4.2: <USB> at usbus4 (disconnected)
ukbd0: at uhub4, port 3, addr 2 (disconnected)
ums0: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <Kensington> at usbus4 (disconnected)
ums1: at uhub4, port 4, addr 3 (disconnected)
usbus4: Controller shutdown complete
usbus5: Controller shutdown
uhub5: at usbus5, port 1, addr 1 (disconnected)
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p30 #0: Mon Nov  2 10:11:50 UTC 2015
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: AMD Sempron(tm) 3850 APU with Radeon(tm) R3     (1297.59-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x700f01  Family = 0x16  Model = 0x0  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I>
  Standard Extended Features=0x8
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 15910752256 (15173 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
kbd1 at kbdmux0
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xffb00000-0xffb3ffff irq 44 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9840) HDA Controller> mem 0xffb64000-0xffb67fff irq 45 at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xffa00000-0xffa001ff irq 28 at device 0.0 on pci1
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xff900000-0xff900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: d0:50:99:13:e3:85
pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xff800000-0xff807fff irq 36 at device 0.0 on pci3
xhci0: 32 byte context size.
usbus0 on xhci0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xffb68000-0xffb69fff irq 18 at device 16.0 on pci0
xhci1: 32 byte context size.
usbus1 on xhci1
ahci1: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xffb6e000-0xffb6e3ff irq 19 at device 17.0 on pci0
ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ohci0: <OHCI (generic) USB controller> mem 0xffb6d000-0xffb6dfff irq 18 at device 18.0 on pci0
usbus2 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffb6c000-0xffb6c0ff irq 17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xffb6b000-0xffb6bfff irq 18 at device 19.0 on pci0
usbus4 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xffb6a000-0xffb6a0ff irq 17 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xffb60000-0xffb63fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5
acpi_button0: <Power Button> on acpi0
ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0
ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xcf000-0xd6fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x2a6 offMax=0x6b1
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm3: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <0x1b21> at usbus0
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1022> at usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <AMD> at usbus2
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <AMD> at usbus3
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <AMD> at usbus4
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <AMD> at usbus5
uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada0: Serial Number JR10006PGYH08E
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada1: Serial Number JR10006PGYD6ZE
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada2: Serial Number JR10006PGYTR8E
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada3: Serial Number JR10006PGYK1YE
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC" frequency 1297594000 Hz quality 1000
uhub2: 4 ports with 4 removable, self powered
uhub4: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
GEOM_STRIPE: Device home_str created (id=3106945155).
GEOM_STRIPE: Disk ada0p4 attached to home_str.
GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Device usr_str created (id=3573821994).
GEOM_STRIPE: Disk ada1p3 attached to usr_str.
GEOM_STRIPE: Disk ada1p4 attached to home_str.
GEOM_STRIPE: Disk ada2p3 attached to usr_str.
GEOM_STRIPE: Disk ada2p4 attached to home_str.
GEOM_STRIPE: Disk ada3p3 attached to usr_str.
GEOM_STRIPE: Device stripe/usr_str activated.
GEOM_STRIPE: Disk ada3p4 attached to home_str.
GEOM_STRIPE: Device stripe/home_str activated.
GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
uhub5: 4 ports with 4 removable, self powered
uhub3: 4 ports with 4 removable, self powered
GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
Root mount waiting for: usbus5
Trying to mount root from ufs:/dev/ada0p3 [rw]...
ugen4.2: <USB> at usbus4
ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4
kbd2 at ukbd0
ums0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4
ums0: 3 buttons and [XYZ] coordinates ID=3
GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
ugen4.3: <Kensington> at usbus4
ums1: <Kensington Kensington PilotMouse Laser - 6 Button, class 0/0, rev 1.10/2.20, addr 3> on usbus4
ums1: 6 buttons and [XYZT] coordinates ID=0
GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17).
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled
info: [drm] Initialized drm 1.1.0 20060810
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...9 2 2 2 2 2 2 1 1 1 1 1 1 0 0 0 0 done
All buffers synced.
Uptime: 5m16s
usbus0: Controller shutdown
uhub0: at usbus0, port 1, addr 1 (disconnected)
usbus0: Controller shutdown complete
usbus1: Controller shutdown
uhub1: at usbus1, port 1, addr 1 (disconnected)
usbus1: Controller shutdown complete
usbus2: Controller shutdown
uhub2: at usbus2, port 1, addr 1 (disconnected)
usbus2: Controller shutdown complete
usbus3: Controller shutdown
uhub3: at usbus3, port 1, addr 1 (disconnected)
usbus3: Controller shutdown complete
usbus4: Controller shutdown
uhub4: at usbus4, port 1, addr 1 (disconnected)
ugen4.2: <USB> at usbus4 (disconnected)
ukbd0: at uhub4, port 3, addr 2 (disconnected)
ums0: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <Kensington> at usbus4 (disconnected)
ums1: at uhub4, port 4, addr 3 (disconnected)
usbus4: Controller shutdown complete
usbus5: Controller shutdown
uhub5: at usbus5, port 1, addr 1 (disconnected)
Copyright (c) 1992-2014 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.3-RELEASE-p30 #0: Mon Nov  2 10:11:50 UTC 2015
    root@amd64-builder.daemonology.net:/usr/obj/usr/src/sys/GENERIC amd64
gcc version 4.2.1 20070831 patched [FreeBSD]
CPU: AMD Sempron(tm) 3850 APU with Radeon(tm) R3     (1297.59-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x700f01  Family = 0x16  Model = 0x0  Stepping = 1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x3ed8220b<SSE3,PCLMULQDQ,MON,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x154037ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,Topology,PNXC,DBE,PL2I>
  Standard Extended Features=0x8
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 15910752256 (15173 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ALASKA A M I>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110527/tbfadt-320)
ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110527/tbfadt-586)
ioapic0 <Version 2.1> irqs 0-23 on motherboard
ioapic1 <Version 2.1> irqs 24-55 on motherboard
kbd1 at kbdmux0
acpi0: <ALASKA A M I> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xf000-0xf0ff mem 0xc0000000-0xcfffffff,0xd0000000-0xd07fffff,0xffb00000-0xffb3ffff irq 44 at device 1.0 on pci0
vgapci0: Boot video device
hdac0: <ATI (0x9840) HDA Controller> mem 0xffb64000-0xffb67fff irq 45 at device 1.1 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 25 at device 2.2 on pci0
pci1: <ACPI PCI bus> on pcib1
ahci0: <ASMedia ASM1061 AHCI SATA controller> port 0xe050-0xe057,0xe040-0xe043,0xe030-0xe037,0xe020-0xe023,0xe000-0xe01f mem 0xffa00000-0xffa001ff irq 28 at device 0.0 on pci1
ahci0: AHCI v1.20 with 2 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 26 at device 2.3 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xff900000-0xff900fff,0xd0800000-0xd0803fff irq 32 at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: Chip rev. 0x4c000000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8251 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: d0:50:99:13:e3:85
pcib3: <ACPI PCI-PCI bridge> irq 27 at device 2.4 on pci0
pci3: <ACPI PCI bus> on pcib3
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xff800000-0xff807fff irq 36 at device 0.0 on pci3
xhci0: 32 byte context size.
usbus0 on xhci0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xffb68000-0xffb69fff irq 18 at device 16.0 on pci0
xhci1: 32 byte context size.
usbus1 on xhci1
ahci1: <AMD Hudson-2 AHCI SATA controller> port 0xf140-0xf147,0xf130-0xf133,0xf120-0xf127,0xf110-0xf113,0xf100-0xf10f mem 0xffb6e000-0xffb6e3ff irq 19 at device 17.0 on pci0
ahci1: AHCI v1.30 with 2 6Gbps ports, Port Multiplier supported
ahcich2: <AHCI channel> at channel 0 on ahci1
ahcich3: <AHCI channel> at channel 1 on ahci1
ohci0: <OHCI (generic) USB controller> mem 0xffb6d000-0xffb6dfff irq 18 at device 18.0 on pci0
usbus2 on ohci0
ehci0: <EHCI (generic) USB 2.0 controller> mem 0xffb6c000-0xffb6c0ff irq 17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci1: <OHCI (generic) USB controller> mem 0xffb6b000-0xffb6bfff irq 18 at device 19.0 on pci0
usbus4 on ohci1
ehci1: <EHCI (generic) USB 2.0 controller> mem 0xffb6a000-0xffb6a0ff irq 17 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
hdac1: <Generic (0x780d1022) HDA Controller> mem 0xffb60000-0xffb63fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb5
acpi_button0: <Power Button> on acpi0
ppc1: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 5 drq 3 on acpi0
ppc1: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc1
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xcf000-0xd6fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
acpi_throttle0: <ACPI CPU Throttling> on cpu0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
acpi_throttle1: <ACPI CPU Throttling> on cpu1
acpi_throttle1: failed to attach P_CNT
device_attach: acpi_throttle1 attach returned 6
acpi_throttle2: <ACPI CPU Throttling> on cpu2
acpi_throttle2: failed to attach P_CNT
device_attach: acpi_throttle2 attach returned 6
acpi_throttle3: <ACPI CPU Throttling> on cpu3
acpi_throttle3: failed to attach P_CNT
device_attach: acpi_throttle3 attach returned 6
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x2a6 offMax=0x6e3
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
pcm1: <ATI R6xx (HDMI)> at nid 5 on hdaa0
hdacc1: <Realtek ALC662 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC662 Audio Function Group> at nid 1 on hdacc1
pcm2: <Realtek ALC662 (Rear Analog)> at nid 20 and 24,26 on hdaa1
pcm3: <Realtek ALC662 (Front Analog)> at nid 27 and 25 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
ugen0.1: <0x1b21> at usbus0
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1022> at usbus1
uhub1: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <AMD> at usbus2
uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <AMD> at usbus3
uhub3: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <AMD> at usbus4
uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <AMD> at usbus5
uhub5: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada0: Serial Number JR10006PGYH08E
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus1 target 0 lun 0
ada1: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada1: Serial Number JR10006PGYD6ZE
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad6
ada2 at ahcich2 bus 0 scbus2 target 0 lun 0
ada2: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada2: Serial Number JR10006PGYTR8E
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad8
ada3 at ahcich3 bus 0 scbus3 target 0 lun 0
ada3: <HGST HTS721010A9E630 JB0OA3J0> ATA-8 SATA 3.x device
ada3: Serial Number JR10006PGYK1YE
ada3: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada3: Command Queueing enabled
ada3: 953869MB (1953525168 512 byte sectors: 16H 63S/T 16383C)
ada3: Previously was known as ad10
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC" frequency 1297593631 Hz quality 1000
uhub4: 4 ports with 4 removable, self powered
uhub2: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
GEOM_STRIPE: Device home_str created (id=3106945155).
GEOM_STRIPE: Disk ada0p4 attached to home_str.
GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Device usr_str created (id=3573821994).
GEOM_STRIPE: Disk ada1p3 attached to usr_str.
GEOM_STRIPE: Disk ada1p4 attached to home_str.
GEOM_STRIPE: Disk ada2p3 attached to usr_str.
GEOM_STRIPE: Disk ada2p4 attached to home_str.
GEOM_STRIPE: Disk ada3p3 attached to usr_str.
GEOM_STRIPE: Device stripe/usr_str activated.
GEOM_STRIPE: Disk ada3p4 attached to home_str.
GEOM_STRIPE: Device stripe/home_str activated.
GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
Root mount waiting for: usbus5 usbus3
uhub3: 4 ports with 4 removable, self powered
uhub5: 4 ports with 4 removable, self powered
Trying to mount root from ufs:/dev/ada0p3 [rw]...
ugen4.2: <USB> at usbus4
ukbd0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4
kbd2 at ukbd0
ums0: <USB USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on usbus4
ums0: 3 buttons and [XYZ] coordinates ID=3
ugen4.3: <Kensington> at usbus4
ums1: <Kensington Kensington PilotMouse Laser - 6 Button, class 0/0, rev 1.10/2.20, addr 3> on usbus4
ums1: 6 buttons and [XYZT] coordinates ID=0
GEOM_STRIPE: Cannot add disk gpt/root3 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c1deec2-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root2 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b838775-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/root1 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b0260a3-9dbc-11e3-91e5-d0509913e385 to usr_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home3 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0c325786-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home2 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b96bfab-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home1 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/0b12f021-9dbc-11e3-91e5-d0509913e385 to home_str (error=17).
GEOM_STRIPE: Cannot add disk ufsid/53dc780bc8825497 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gpt/home0 to home_str (error=17).
GEOM_STRIPE: Cannot add disk gptid/70966afa-1a06-11e4-ad31-d0509913e385 to home_str (error=17).
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny, logging disabled

--------------050004050907060201030300--



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?566DEB4B.5050808>