Skip site navigation (1)Skip section navigation (2)
Date:      Wed, 17 Dec 2008 12:17:12 -0800
From:      "Paul Saab" <ps@mu.org>
To:        "Uwe Grohnwaldt" <uwe@grohnwaldt.eu>
Cc:        jfv@freebsd.org, freebsd-net@freebsd.org, thompsa@freebsd.org
Subject:   Re: [Fwd: em0 disappeared]
Message-ID:  <5c0ff6a70812171217w1f19b185v7f8d3defde6c4deb@mail.gmail.com>
In-Reply-To: <494954FD.8050708@grohnwaldt.eu>
References:  <494954FD.8050708@grohnwaldt.eu>

next in thread | previous in thread | raw e-mail | index | archive | help
does dmesg show the device failing to attach?

On Wed, Dec 17, 2008 at 11:37 AM, Uwe Grohnwaldt <uwe@grohnwaldt.eu> wrote:

> hi,
>
> i've forgotten the cc, sry.
>
> chers,
> uwe
>
> howdy,
>
> miwi and me tried to update a freebsd-current server to the todays src.
> after the update my em0-device disappeared. information about the old image:
>
> uname -a
> FreeBSD amd.miwibox.org 8.0-CURRENT FreeBSD 8.0-CURRENT #0: Fri Jul 25
> 11:01:22 CEST 2008 root@xizor.skywalkers.local:/usr/obj/usr/src/sys/GENERIC
>  amd64
>
> pciconf
> em0@pci0:4:7:0: class=0x020000 card=0x13768086 chip=0x107c8086 rev=0x05
> hdr=0x00 vendor     = 'Intel Corporation' device     = 'PRO/1000 GT'
>     class      = network subclass   = ethernet
>
>
> after the update there is no em-device:
> pciconf -lv:
>
> # amd# pciconf -lv | more
> # none0@pci0:0:0:0:      class=0x050000 card=0x10c51734 chip=0x02f010de
> rev=0xa2 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 Host Bridge'
> #     class      = memory
> #     subclass  = RAM
> # none1@pci0:0:0:1:      class=0x050000 card=0x10c51734 chip=0x02fa10de
> rev=0xa2 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 Memory Controller 0'
> #     class      = memory
> #     subclass  = RAM
> # none2@pci0:0:0:2:      class=0x050000 card=0x10c51734 chip=0x02fe10de
> rev=0xa2 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 Memory Controller 1'
> #     class      = memory
> #     subclass  = RAM
> # none3@pci0:0:0:3:      class=0x050000 card=0x10c51734 chip=0x02f810de
> rev=0xa2 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 Memory Controller 5'
> #     class      = memory
> #     subclass  = RAM
> # hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 Memory Controller 4'
> #     class      = memory
> #     subclass  = RAM
> # hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 Host Bridge'
> #     class      = memory
> #     subclass  = RAM
> # hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 Memory Controller 3'
> #     class      = memory
> #     subclass  = RAM
> # hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 Memory Controller 2'
> #     class      = memory
> #     subclass  = RAM
> # hdr=0x01
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 PCIe Bridge'
> #     class      = bridge
> #     subclass  = PCI-PCI
> # hdr=0x01
> #     vendor    = 'Nvidia Corp'
> #     device    = 'C51 PCIe Bridge'
> #     class      = bridge
> #     subclass  = PCI-PCI
> # hdr=0x00
> #     vendor    = 'Nvidia Corp'
> # rocessor)'
> #     class      = display
> #     subclass  = VGA
> # hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'MCP51 Host Bridge'
> #     class      = memory
> #     subclass  = RAM
> # hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'MCP51 LPC Bridge'
> #     class      = bridge
> #     subclass  = PCI-ISA
> # hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'NVIDIA SMB Bus Controller NVIDIA nForce PCI System
> Management'
> #     class      = serial bus
> #     subclass  = SMBus
> # ohci0@pci0:0:11:0:      class=0x0c0310 card=0x10c61734 chip=0x026d10de
> rev=0xa3 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'MCP51 USB Controller'
> #     class      = serial bus
> #     subclass  = USB
> # ehci0@pci0:0:11:1:      class=0x0c0320 card=0x10c61734 chip=0x026e10de
> rev=0xa3 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'MCP51 USB Controller'
> #     class      = serial bus
> #     subclass  = USB
> # atapci0@pci0:0:13:0:    class=0x01018a card=0x10c61734 chip=0x026510de
> rev=0xf1 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'MCP51 Parallel ATA Controller'
> #     class      = mass storage
> #     subclass  = ATA
> # atapci1@pci0:0:14:0:    class=0x010185 card=0x10c61734 chip=0x026610de
> rev=0xf1 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'MCP51 Serial ATA Controller'
> #     class      = mass storage
> #     subclass  = ATA
> # atapci2@pci0:0:15:0:    class=0x010185 card=0x10c61734 chip=0x026710de
> rev=0xf1 hdr=0x00
> #     vendor    = 'Nvidia Corp'
> #     device    = 'MCP51 Serial ATA Controller'
> #     class      = mass storage
> #     subclass  = ATA
> # pcib3@pci0:0:16:0:      class=0x060401 card=0xcb8410de chip=0x026f10de
> rev=0xa2 hdr=0x01
> #     vendor    = 'Nvidia Corp'
> #     device    = 'MCP51 PCI Bridge'
> #     class      = bridge
> #     subclass  = PCI-PCI
> # hostb0@pci0:0:24:0:    class=0x060000 card=0x00000000 chip=0x11001022
> rev=0x00 hdr=0x00
> #     vendor    = 'Advanced Micro Devices (AMD)'
> #     device    = '(K8) Athlon 64/Opteron HyperTransport Technology
> Configuration'
> #     class      = bridge
> #     subclass  = HOST-PCI
> # hostb1@pci0:0:24:1:    class=0x060000 card=0x00000000 chip=0x11011022
> rev=0x00 hdr=0x00
> #     vendor    = 'Advanced Micro Devices (AMD)'
> #     device    = '(K8) Athlon 64/Opteron Address Map'
> #     class      = bridge
> #     subclass  = HOST-PCI
> # hostb2@pci0:0:24:2:    class=0x060000 card=0x00000000 chip=0x11021022
> rev=0x00 hdr=0x00
> #     vendor    = 'Advanced Micro Devices (AMD)'
> #     device    = '(K8) Athlon 64/Opteron DRAM Controller'
> #     class      = bridge
> #     subclass  = HOST-PCI
> # hostb3@pci0:0:24:3:    class=0x060000 card=0x00000000 chip=0x11031022
> rev=0x00 hdr=0x00
> #     vendor    = 'Advanced Micro Devices (AMD)'
> #     device    = '(K8) Athlon 64/Opteron Miscellaneous Control'
> #     class      = bridge
> #     subclass  = HOST-PCI
> # amd#
>
>
> moreover i have a lspci from the rescue-linux:
> # 00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
> # 00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
> # 00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
> # 00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
> # 00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
> # 00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
> # 00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
> # 00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
> # 00:02.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
> # 00:03.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
> # 00:05.0 VGA compatible controller: nVidia Corporation C51 PCI Express
> Bridge (rev a2)
> # 00:09.0 RAM memory: nVidia Corporation MCP51 Host Bridge (rev a2)
> # 00:0a.0 ISA bridge: nVidia Corporation MCP51 LPC Bridge (rev a3)
> # 00:0a.1 SMBus: nVidia Corporation MCP51 SMBus (rev a3)
> # 00:0b.0 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
> # 00:0b.1 USB Controller: nVidia Corporation MCP51 USB Controller (rev a3)
> # 00:0d.0 IDE interface: nVidia Corporation MCP51 IDE (rev f1)
> # 00:0e.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller
> (rev f1)
> # 00:0f.0 IDE interface: nVidia Corporation MCP51 Serial ATA Controller
> (rev f1)
> # 00:10.0 PCI bridge: nVidia Corporation MCP51 PCI Bridge (rev a2)
> # 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> HyperTransport Technology Configuration
> # 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Address Map
> # 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> DRAM Controller
> # 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
> Miscellaneous Control
> # 04:07.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet
> Controller (rev 05)
>
> has anybody an idea?
>
> cheers,
> uwe
>
>
> _______________________________________________
> freebsd-net@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-net
> To unsubscribe, send any mail to "freebsd-net-unsubscribe@freebsd.org"
>



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?5c0ff6a70812171217w1f19b185v7f8d3defde6c4deb>