Date: Mon, 08 Aug 2005 16:44:47 -0400 From: Mike Tancsa <mike@sentex.net> To: "Poul-Henning Kamp" <phk@haven.freebsd.dk>, Pawel Jakub Dawidek <pjd@FreeBSD.org> Cc: Michael Reifenberger <mike@Reifenberger.com>, freebsd-current@FreeBSD.org Subject: Re: Hifn driver in SMP (was Re: GELI - disk encryption GEOM class committed.) Message-ID: <6.2.1.2.0.20050808162711.04d40c28@64.7.153.2> In-Reply-To: <42475.1123513974@phk.freebsd.dk> References: <Your message of "Mon, 08 Aug 2005 10:49:07 %2B0200." <20050808084907.GB1578@garage.freebsd.pl> <42475.1123513974@phk.freebsd.dk>
next in thread | previous in thread | raw e-mail | index | archive | help
At 11:12 AM 08/08/2005, Poul-Henning Kamp wrote:
>I belive there is a bug in the HiFn chips that makes them do a soft reset
>under some set of circumstances which we have never been able to nail
>down.
Actually,
I think this is something different. I know the issue you are
referring to, and it seems to happen on many (but not all) motherboards.
Note, this problem does not happen in UP mode on this box, only on
SMP. Also, I just booted RELENG_4_11 on the box and installed an SMP kernel.
hippo# hifnstats
input 7648447680 bytes 2338053 packets
output 7648431264 bytes 2338052 packets
invalid 0 nomem 0 abort 0
noirq 1263291 unaligned 0
totbatch 0 maxbatch 0
nomem: map 0 load 0 mbuf 0 mcl 0 cr 0 sd 0
hippo#
I am able to run
/usr/bin/openssl aes-128-cbc -in big -k pass | ssh -c aes128-cbc
mdtancsa@127.0.0.1 "cat - > /dev/null"
until the cows come home without issue, even with an SMP kernel built. So
it seems like its something with this box and RELENG_6 that causes the box
to totally lock up
Here is the same hardware on RELENG_4
hippo# dmesg
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.11-RELEASE #0: Mon Aug 8 15:43:47 EDT 2005
root@hippo.netperf.freebsd.org:/usr/obj/usr/src/sys/smp
Timecounter "i8254" frequency 1193182 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (500.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x672 Stepping = 2
Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 2147475456 (2097144K bytes)
config> q
avail memory = 2086166528 (2037272K bytes)
Changing APIC ID for IO APIC #0 from 0 to 4 on chip
Programming 24 pins in IOAPIC #0
IOAPIC #0 intpin 2 -> irq 0
FreeBSD/SMP: Multiprocessor motherboard: 4 CPUs
cpu0 (BSP): apic id: 3, version: 0x00040011, at 0xfee00000
cpu1 (AP): apic id: 0, version: 0x00040011, at 0xfee00000
cpu2 (AP): apic id: 1, version: 0x00040011, at 0xfee00000
cpu3 (AP): apic id: 2, version: 0x00040011, at 0xfee00000
io0 (APIC): apic id: 4, version: 0x00170011, at 0xfec00000
Preloaded elf kernel "kernel" at 0xc056a000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc056a09c.
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 11 entries at 0xc00fc7a0
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82454NX PXB#0, Bus#A> on motherboard
IOAPIC #0 intpin 14 -> irq 2
pci0: <PCI bus> on pcib0
isab0: <Intel 82371AB PCI to ISA bridge> at device 2.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> at device 2.1 on pci0
atapci0: ATA channel disabled by BIOS
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> irq 0 at device 2.2 on pci0
uhci0: Could not map ports
device_probe_and_attach: uhci0 attach returned 6
Timecounter "PIIX" frequency 3579545 Hz
chip0: <Intel 82371AB Power management controller> port 0x850-0x85f at
device 2.3 on pci0
pci0: <ATI Mach64-GI graphics accelerator> at 4.0
pcib1: <PCI to PCI bridge (vendor=8086 device=0960)> at device 8.0 on pci0
pci1: <PCI bus> on pcib1
amr0: <LSILogic MegaRAID> mem 0xfe000000-0xfe3fffff irq 2 at device 8.1 on pci0
amr0: <Series 466> Firmware GH6D, BIOS 1.43, 32MB RAM
pcib4: <Intel 82454NX PCI Expander Bridge> at device 18.0 on pci0
pcib5: <Intel 82454NX PCI Expander Bridge> at device 19.0 on pci0
pcib6: <Intel 82454NX PCI Expander Bridge> at device 20.0 on pci0
pcib2: <Intel 82454NX PXB#0, Bus#B> on motherboard
IOAPIC #0 intpin 21 -> irq 5
IOAPIC #0 intpin 22 -> irq 10
IOAPIC #0 intpin 20 -> irq 11
pci2: <PCI bus> on pcib2
ahc0: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xec00-0xecff mem
0xfe902000-0xfe902fff irq 5 at device 4.0 on pci2
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc1: <Adaptec aic7890/91 Ultra2 SCSI adapter> port 0xe800-0xe8ff mem
0xfe901000-0xfe901fff irq 10 at device 6.0 on pci2
aic7890/91: Ultra2 Wide Channel A, SCSI Id=7, 32/253 SCBs
ahc2: <Adaptec aic7860 Ultra SCSI adapter> port 0xe400-0xe4ff mem
0xfe900000-0xfe900fff irq 11 at device 8.0 on pci2
aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
pcib3: <Intel 82454NX PXB#1, Bus#A> on motherboard
IOAPIC #0 intpin 19 -> irq 12
IOAPIC #0 intpin 18 -> irq 13
pci3: <PCI bus> on pcib3
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.42> port
0xfcc0-0xfcff mem 0xfeb00000-0xfeb1ffff,0xfeb20000-0xfeb3ffff irq 12 at
device 1.0 on pci3
em0: Speed:N/A Duplex:N/A
hifn0 mem 0xfeb40000-0xfeb47fff,0xfeb48000-0xfeb49fff,0xfeb4a000-0xfeb4afff
irq 13 at device 3.0 on pci3
hifn0: Hifn 7955, rev 0, 32KB dram
orm0: <Option ROMs> at iomem
0xc0000-0xc7fff,0xc8000-0xc8fff,0xd0000-0xd07ff,0xd4000-0xd47ff,0xd8000-0xd87ff
on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata0 at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1 at port 0x170-0x177,0x376 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x100>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via IOAPIC #0 intpin 2
Waiting 15 seconds for SCSI devices to settle
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 17366MB (35565568 sectors) RAID 1 (optimal)
SMP: AP CPU #3 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
pass0 at amr0 bus 0 target 6 lun 0
pass0: <DELL 1x3 U2W SCSI BP 5.12> Fixed Processor SCSI-2 device
Mounting root from ufs:/dev/amrd0s1a
cd0 at ahc2 bus 0 target 5 lun 0
cd0: <NEC CD-ROM DRIVE:465 1.25> Removable CD-ROM SCSI-2 device
cd0: 20.000MB/s transfers (20.000MHz, offset 15)
cd0: Attempt to query device size failed: NOT READY, Medium not present
WARNING: / was not properly dismounted
em0: Link is up 1000 Mbps Full Duplex
em0: Link is up 1000 Mbps Full Duplex
---Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.1.2.0.20050808162711.04d40c28>