Date: Wed, 10 Aug 2005 08:15:50 -0400 From: Mike Tancsa <mike@sentex.net> To: Matthias Buelow <mkb@incubus.de>, freebsd-stable@freebsd.org Subject: Re: ad10: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=11441599 Message-ID: <6.2.1.2.0.20050810081251.05298ff0@64.7.153.2> In-Reply-To: <20050810024618.GA8198@drjekyll.mkbuelow.net> References: <42F7F7E8.1020507@mail.uni-mainz.de> <42F9009E.3030601@mac.com> <42F9609E.1010207@goldsword.com> <20050810023111.GA2913@FS.denninger.net> <20050810024618.GA8198@drjekyll.mkbuelow.net>
next in thread | previous in thread | raw e-mail | index | archive | help
At 10:46 PM 09/08/2005, Matthias Buelow wrote: >Karl Denninger wrote: > > >SII chipsets were ok in 4.x, but the newer ATA code broke badly with them. > >I've had a PR open on this since February, and many others have reported > >similar issues. The problems still exist in the 6.x-BETA releases I've > >checked out, and are in some cases MORE severe (for me anyway) than they are > >in 5.4. > >Well, it doesn't affect just the SII chips.. I see the same on an >Intel ICH6 chipset but never after the kernel has mounted the root >fs. Sometimes it takes several attempts until it manages to do so, >though. The machine works w/o any such problems on other OSes. I've I have ICH6 boxes and they run just fine without issue. Have you checked to see if it actually has bad sectors or is a problem with your tray (if you use one) [verify1]% dmesg | grep -i ich uhci0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> port 0xe000-0xe01f at device 29.0 on pci0 usb0: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-A> on uhci0 uhci1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> port 0xe100-0xe11f at device 29.1 on pci0 usb1: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-B> on uhci1 uhci2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> port 0xe200-0xe21f at device 29.2 on pci0 usb2: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-C> on uhci2 uhci3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> port 0xe300-0xe31f at device 29.3 on pci0 usb3: <Intel 82801FB/FR/FW/FRW (ICH6) USB controller USB-D> on uhci3 fxp0: <Intel 82562EZ (ICH6)> port 0xd000-0xd03f mem 0xd0000000-0xd0000fff irq 10 at device 8.0 on pci1 atapci0: <Intel ICH6 SATA150 controller> port 0xf000-0xf00f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0 [verify1]% Master: ad0 <ST3120026AS/3.18> Serial ATA v1.0 ---Mike
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6.2.1.2.0.20050810081251.05298ff0>