Date: Fri, 9 Jul 2010 17:26:00 +0200 From: Markus Gebert <markus.gebert@hostpoint.ch> To: freebsd-stable <freebsd-stable@freebsd.org> Subject: 8.1-RC2 - PCI fatal error or MCE triggered by USB/ehci on Sun X4100M2? Message-ID: <6B57591F-9FA2-45EB-825F-1DB025C0635D@hostpoint.ch>
next in thread | raw e-mail | index | archive | help
Hi
Summary:
With FreeBSD 8.1-RC2 we get an MCE (fatal trap 28) on a Sun X4100M2 when =
putting load on mpt and em. Initially thinking of a hardware problem, =
and after many tests, we're able to avoid the panic by not compiling the =
usb stack into the kernel. We cannot reproduce the problem on 6.x, 7.x =
or, as it seems right now, even CURRENT.
long story:
We're in the process of testing FreeBSD 8.1-RC2 for future deployment on =
our servers. When testing on a Sun X4100M2 we have encountered strange =
behavior: Under medium load, the test machine would reboot itself =
(hardware-triggered) without panic and spit out errors like =
"hypertransport sync flood error on last boot" during POST (or complain =
about fatal PCI errors). Thinking our test machine could have bad =
hardware, we replaced RAM, which didn't help. We've also put the same =
load on a second X4100M2, getting the same results. Both test machines =
had been in production before, happily running 6.4. We have at least 35 =
X4100M2 running on 6.4 in production, and another 15 running on 7.2, all =
of them not showing this problem at all. So we started thinking this =
problem could be software-related or at least triggered by software.
After altering a BIOS setting to not reboot in case of a hypertransport =
flood, we finally managed to get an MCE reported by MCA and a fatal trap =
28:
--
MCA: Bank 4, Status 0xb400004000030c2b
MCA: Global Cap 0x0000000000000105, Status 0x0000000000000007
MCA: Vendor "AuthenticAMD", ID 0x40f13, APIC ID 2
MCA: CPU 2 UNCOR BUSLG Observer WR I/O
MCA: Address 0xfd00000000
Fatal trap 28: machine check trap while in kernel mode
cpuid =3D 2; apic id =3D 02
instruction pointer =3D 0x20:0xffffffff80876506
stack pointer =3D 0x28:0xffffff800004ab50
frame pointer =3D 0x28:0xffffff800004ab60
code segment =3D base 0x0, limit 0xfffff, type 0x1b
=3D DPL 0, pres 1, long 1, def32 0, gran 1
processor eflags =3D interrupt enabled, IOPL =3D 0
current process =3D 11 (idle: cpu2)
trap number =3D 28
panic: machine check trap
cpuid =3D 2
Uptime: 3m9s
--
Still, this may suggest a hardware problem. A 8.1 kernel with debug =
options didn't bring any more information. When WITNESS kicked in, it =
seemed random and to be symptom rather than cause. The same goes for DDB =
backtraces, random and most probably worthless. I guess that's expected =
with this kind of panic. So we fell back on trial&error and ruling out =
stuff that is new in FreeBSD 8. What we've learned so far:
- we cannot reproduce with 6.x, 7.x
- upgrading system firmware and lsi logic raidcontroller firmware did =
not help
- disabling superpages does not help
- disabling MCA does not help
- although zfs scrub is part of a good way to reproduce the panic, we =
can also reproduce it with UFS, so zfs seems to be off the hook
- best way to reproduce: put load on em (wget a large file) AND mpt (cp =
a large file, or run zpool scrub), panic within less than a minute
- only putting load on em OR mpt does not reliably reproduce the panic
- putting load on nfe and mpt does not reliably reproduce the panic
- buildkernel with -j8 always runs through just fine
- em and mpt sit on the same pci bus
- so far, we couldn't reproduce the panic on CURRENT
At this point we thought of a bug in either em, mpt or pci code, but =
weren't able to find anything in the svn commit logs that could explain =
what we were seeing. It's hard though to find something so unspecific...
Out of despair, we tried to rule out the new usb stack. We kicked =
everything usb-related out of our kernel config, and with this usb-less =
kernel, the MCEs disappered! So, although the way to reproduce is to put =
load on load em and mpt, the real trigger seems to be usb, which gets no =
load at all. The only devices there are the iLOM virtual mouse and =
keyboard and we did not use the graphical remote console during our =
tests (iLOM serial console only). We tried to break this down further =
and learned:
- not 100% sure, but loading the necessary usb modules (ohci, ehci, =
ukbd, ums) after boot (manually with kldload) seems fine, no panic so =
far when trying to reproduce like this
- a kernel with only ohci, ukbd and ums compiled-in is fine
- a kernel with only ehci compiled-in makes us able to reproduce the =
panic
- so ehci being there on kernel boot seems to have some kind of =
relevance
- we see no changes to the ehci code from 8.1 to CURRENT that could make =
the problem go away, so the cause could be elsewhere (pci code?) and =
ehci is just a trigger
At this point we're stuck and need help from someone with more insight. =
The test system will be available for a while, so if you need us to run =
more tests, we're happy to do that. We maybe could also provide remote =
access to such a system if necessary. Although we have workaround now, =
that works for us, it would still be great to see this fixed. I guess =
we're not the only ones out there using X4100M2s with FreeBSD.
About the test setup:
- Sun X4100M2
- tested with 4 and 16 GB RAM
- two PCIe nfe interfaces
- two PCI-X em interfaces
- one PCI-X mpt controller, non-raid mode, two disks (da), =
gpt-partioned, zfs mirror, boot from zfs
- one OHCI controller with iLOM virtual keyboard and virtual mouse =
attached
- one EHCI controller with nothing attached
More information about the system below.
Any help appreciated.
Markus
# uname -a
FreeBSD XX.hostpoint.ch 8.1-RC2 FreeBSD 8.1-RC2 #4: Fri Jul 9 16:53:56 =
CEST 2010 root@XX.hostpoint.ch:/usr/obj/usr/src/sys/YY amd64
# cpuinfo
Machine class: amd64
CPU Model: Dual-Core AMD Opteron(tm) Processor 2220
Number of CPUs: 4
# usbconfig
ugen0.1: <OHCI root HUB nVidia> at usbus0, cfg=3D0 md=3DHOST spd=3DFULL =
(12Mbps) pwr=3DON
ugen1.1: <EHCI root HUB nVidia> at usbus1, cfg=3D0 md=3DHOST spd=3DHIGH =
(480Mbps) pwr=3DON
ugen0.2: <Virtual Keyboard and Mouse American Megatrends Inc.> at =
usbus0, cfg=3D0 md=3DHOST spd=3DFULL (12Mbps) pwr=3DON
# pciconf -lv
none0@pci0:0:0:0: class=3D0x058000 card=3D0x00000000 =
chip=3D0x005e10de rev=3D0xa3 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 Memory Controller'
class =3D memory
isab0@pci0:0:1:0: class=3D0x060100 card=3D0xcb8410de =
chip=3D0x005110de rev=3D0xf3 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 ISA Bridge'
class =3D bridge
subclass =3D PCI-ISA
none1@pci0:0:1:1: class=3D0x0c0500 card=3D0xcb8410de =
chip=3D0x005210de rev=3D0xa2 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 SMBus'
class =3D serial bus
subclass =3D SMBus
ohci0@pci0:0:2:0: class=3D0x0c0310 card=3D0xcb84108e =
chip=3D0x005a10de rev=3D0xa2 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 USB Controller'
class =3D serial bus
subclass =3D USB
ehci0@pci0:0:2:1: class=3D0x0c0320 card=3D0xcb84108e =
chip=3D0x005b10de rev=3D0xa3 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 USB 2.0 Controller'
class =3D serial bus
subclass =3D USB
atapci0@pci0:0:6:0: class=3D0x01018a card=3D0xcb8410de =
chip=3D0x005310de rev=3D0xf2 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 Parallel ATA Controller'
class =3D mass storage
subclass =3D ATA
pcib1@pci0:0:9:0: class=3D0x060401 card=3D0x00000000 =
chip=3D0x005c10de rev=3D0xf2 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCI Bridge'
class =3D bridge
subclass =3D PCI-PCI
nfe0@pci0:0:10:0: class=3D0x068000 card=3D0xcb8410de =
chip=3D0x005710de rev=3D0xf3 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'NVIDIA Network Bus Enumerator (CK804)'
class =3D bridge
pcib2@pci0:0:11:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x005d10de rev=3D0xf3 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCIe Bridge'
class =3D bridge
subclass =3D PCI-PCI
pcib3@pci0:0:12:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x005d10de rev=3D0xf3 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCIe Bridge'
class =3D bridge
subclass =3D PCI-PCI
pcib4@pci0:0:13:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x005d10de rev=3D0xf3 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCIe Bridge'
class =3D bridge
subclass =3D PCI-PCI
pcib5@pci0:0:14:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x005d10de rev=3D0xa3 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCIe Bridge'
class =3D bridge
subclass =3D PCI-PCI
hostb0@pci0:0:24:0: class=3D0x060000 card=3D0x00000000 =
chip=3D0x11001022 rev=3D0x00 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport =
Technology Configuration'
class =3D bridge
subclass =3D HOST-PCI
hostb1@pci0:0:24:1: class=3D0x060000 card=3D0x00000000 =
chip=3D0x11011022 rev=3D0x00 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
class =3D bridge
subclass =3D HOST-PCI
hostb2@pci0:0:24:2: class=3D0x060000 card=3D0x00000000 =
chip=3D0x11021022 rev=3D0x00 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'Athlon64/Opteron/Sempron (K8 Family) DRAM =
Controller'
class =3D bridge
subclass =3D HOST-PCI
hostb3@pci0:0:24:3: class=3D0x060000 card=3D0x00000000 =
chip=3D0x11031022 rev=3D0x00 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous =
Control'
class =3D bridge
subclass =3D HOST-PCI
hostb4@pci0:0:25:0: class=3D0x060000 card=3D0x00000000 =
chip=3D0x11001022 rev=3D0x00 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport =
Technology Configuration'
class =3D bridge
subclass =3D HOST-PCI
hostb5@pci0:0:25:1: class=3D0x060000 card=3D0x00000000 =
chip=3D0x11011022 rev=3D0x00 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
class =3D bridge
subclass =3D HOST-PCI
hostb6@pci0:0:25:2: class=3D0x060000 card=3D0x00000000 =
chip=3D0x11021022 rev=3D0x00 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'Athlon64/Opteron/Sempron (K8 Family) DRAM =
Controller'
class =3D bridge
subclass =3D HOST-PCI
hostb7@pci0:0:25:3: class=3D0x060000 card=3D0x00000000 =
chip=3D0x11031022 rev=3D0x00 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous =
Control'
class =3D bridge
subclass =3D HOST-PCI
vgapci0@pci0:1:3:0: class=3D0x030000 card=3D0x80081002 =
chip=3D0x47521002 rev=3D0x27 hdr=3D0x00
vendor =3D 'ATI Technologies Inc. / Advanced Micro Devices, =
Inc.'
device =3D 'ATI On-Board VGA for HP Proliant 350 G3 (Rage XL =
PCI)'
class =3D display
subclass =3D VGA
none2@pci0:128:0:0: class=3D0x058000 card=3D0x00000000 =
chip=3D0x005e10de rev=3D0xa3 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 Memory Controller'
class =3D memory
none3@pci0:128:1:0: class=3D0x058000 card=3D0xcb8410de =
chip=3D0x00d310de rev=3D0xf3 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 Memory Controller'
class =3D memory
nfe1@pci0:128:10:0: class=3D0x068000 card=3D0xcb8410de =
chip=3D0x005710de rev=3D0xf3 hdr=3D0x00
vendor =3D 'NVIDIA Corporation'
device =3D 'NVIDIA Network Bus Enumerator (CK804)'
class =3D bridge
pcib7@pci0:128:11:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x005d10de rev=3D0xf3 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCIe Bridge'
class =3D bridge
subclass =3D PCI-PCI
pcib8@pci0:128:12:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x005d10de rev=3D0xf3 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCIe Bridge'
class =3D bridge
subclass =3D PCI-PCI
pcib9@pci0:128:13:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x005d10de rev=3D0xf3 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCIe Bridge'
class =3D bridge
subclass =3D PCI-PCI
pcib10@pci0:128:14:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x005d10de rev=3D0xa3 hdr=3D0x01
vendor =3D 'NVIDIA Corporation'
device =3D 'nForce4 PCIe Bridge'
class =3D bridge
subclass =3D PCI-PCI
pcib11@pci0:128:16:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x74581022 rev=3D0x12 hdr=3D0x01
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'PCI-X Bridge (AMD-8132)'
class =3D bridge
subclass =3D PCI-PCI
ioapic0@pci0:128:16:1: class=3D0x080010 card=3D0x74591022 =
chip=3D0x74591022 rev=3D0x12 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'PCI-X IOAPIC (AMD-8132)'
class =3D base peripheral
subclass =3D interrupt controller
pcib12@pci0:128:17:0: class=3D0x060400 card=3D0x00000000 =
chip=3D0x74581022 rev=3D0x12 hdr=3D0x01
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'PCI-X Bridge (AMD-8132)'
class =3D bridge
subclass =3D PCI-PCI
ioapic1@pci0:128:17:1: class=3D0x080010 card=3D0x74591022 =
chip=3D0x74591022 rev=3D0x12 hdr=3D0x00
vendor =3D 'Advanced Micro Devices (AMD)'
device =3D 'PCI-X IOAPIC (AMD-8132)'
class =3D base peripheral
subclass =3D interrupt controller
em0@pci0:134:1:0: class=3D0x020000 card=3D0x10118086 =
chip=3D0x10108086 rev=3D0x03 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D 'Dual Port Gigabit Ethernet Controller (Copper) =
(82546EB)'
class =3D network
subclass =3D ethernet
em1@pci0:134:1:1: class=3D0x020000 card=3D0x10118086 =
chip=3D0x10108086 rev=3D0x03 hdr=3D0x00
vendor =3D 'Intel Corporation'
device =3D 'Dual Port Gigabit Ethernet Controller (Copper) =
(82546EB)'
class =3D network
subclass =3D ethernet
mpt0@pci0:134:2:0: class=3D0x010000 card=3D0x30601000 =
chip=3D0x00501000 rev=3D0x02 hdr=3D0x00
vendor =3D 'LSI Logic (Was: Symbios Logic, NCR)'
device =3D 'SAS 3000 series, 4-port with 1064 -StorPort'
class =3D mass storage
subclass =3D SCSI
# cat /usr/src/sys/amd64/conf/YY
include GENERIC
ident YY
options IPFIREWALL
options IPFIREWALL_VERBOSE
options IPFIREWALL_VERBOSE_LIMIT=3D5
options IPFIREWALL_DEFAULT_TO_ACCEPT
options IPDIVERT
options KDB # Enable kernel debugger =
support.
options DDB # Support DDB.
options GDB # Support remote GDB.
options DEADLKRES # Enable the deadlock resolver
options INVARIANTS # Enable calls of extra sanity =
checking
options INVARIANT_SUPPORT # Extra sanity checks of =
internal structures, required by INVARIANTS
options WITNESS # Enable checks to detect =
deadlocks and cycles
options WITNESS_SKIPSPIN # Don't run witness on spinlocks =
for speed
(other version with no usb or no ehci could be provided if necessary)
verbose boot:
GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
SMAP type=3D01 base=3D0000000000000000 len=3D000000000009bc00
SMAP type=3D02 base=3D000000000009bc00 len=3D0000000000004400
SMAP type=3D02 base=3D00000000000e6000 len=3D000000000001a000
SMAP type=3D01 base=3D0000000000100000 len=3D00000000dbea0000
SMAP type=3D01 base=3D00000000dbfae000 len=3D0000000000002000
SMAP type=3D03 base=3D00000000dbfb0000 len=3D000000000000e000
SMAP type=3D04 base=3D00000000dbfbe000 len=3D0000000000032000
SMAP type=3D02 base=3D00000000dbff0000 len=3D0000000000010000
SMAP type=3D02 base=3D00000000e0000000 len=3D0000000010000000
SMAP type=3D02 base=3D00000000fec00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000fee00000 len=3D0000000000001000
SMAP type=3D02 base=3D00000000ff700000 len=3D0000000000900000
SMAP type=3D01 base=3D0000000100000000 len=3D0000000324000000
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights =
reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RC2 #4: Fri Jul 9 16:53:56 CEST 2010
root@XX.hostpoint.ch:/usr/obj/usr/src/sys/YY amd64
WARNING: WITNESS option enabled, expect reduced performance.
Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff81204000.
Preloaded elf obj module "/boot/kernel/zfs.ko" at 0xffffffff81204250.
Preloaded elf obj module "/boot/kernel/opensolaris.ko" at =
0xffffffff812048f8.
Preloaded /boot/zfs/zpool.cache "/boot/zfs/zpool.cache" at =
0xffffffff81204f28.
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2792595272 Hz
CPU: Dual-Core AMD Opteron(tm) Processor 2220 (2792.60-MHz K8-class CPU)
Origin =3D "AuthenticAMD" Id =3D 0x40f13 Family =3D f Model =3D 41 =
Stepping =3D 3
=
Features=3D0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE=
,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
Features2=3D0x2001<SSE3,CX16>
AMD =
Features=3D0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
AMD Features2=3D0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
L1 2MB data TLB: 8 entries, fully associative
L1 2MB instruction TLB: 8 entries, fully associative
L1 4KB data TLB: 32 entries, fully associative
L1 4KB instruction TLB: 32 entries, fully associative
L1 data cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way associative
L1 instruction cache: 64 kbytes, 64 bytes/line, 1 lines/tag, 2-way =
associative
L2 2MB unified TLB: 0 entries, disabled/not present
L2 4KB data TLB: 512 entries, 4-way associative
L2 4KB instruction TLB: 512 entries, 4-way associative
L2 unified cache: 1024 kbytes, 64 bytes/line, 1 lines/tag, 16-way =
associative
real memory =3D 17179869184 (16384 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x0000000000097fff, 618496 bytes (151 pages)
0x000000000123f000 - 0x00000000dbf9ffff, 3671461888 bytes (896353 pages)
0x00000000dbfae000 - 0x00000000dbfaffff, 8192 bytes (2 pages)
0x0000000100000000 - 0x0000000404dd5fff, 12966518784 bytes (3165654 =
pages)
avail memory =3D 16551731200 (15784 MB)
ACPI APIC Table: <SUN X4200 M2>
INTR: Adding local APIC 1 as a target
INTR: Adding local APIC 2 as a target
INTR: Adding local APIC 3 as a target
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 2
cpu3 (AP): APIC ID: 3
x86bios: IVT 0x000000-0x0004ff at 0xffffff0000000000
x86bios: SSEG 0x010000-0x01ffff at 0xffffff800004a000
x86bios: EBDA 0x09b000-0x09ffff at 0xffffff000009b000
x86bios: ROM 0x0a0000-0x0effff at 0xffffff00000a0000
APIC: CPU 0 has ACPI ID 1
APIC: CPU 1 has ACPI ID 2
APIC: CPU 2 has ACPI ID 3
APIC: CPU 3 has ACPI ID 4
ULE: setup cpu 0
ULE: setup cpu 1
ULE: setup cpu 2
ULE: setup cpu 3
ACPI: RSDP 0xfa040 00024 (v2 SUN )
ACPI: XSDT 0xdbfb0100 00094 (v1 SUN X4200 M2 00000104 MSFT 00000097)
ACPI: FACP 0xdbfb0290 000F4 (v3 SUN X4200 M2 00000104 MSFT 00000097)
ACPI: DSDT 0xdbfb0510 0702A (v1 SUN X4200 M2 00000104 INTL 20050624)
ACPI: FACS 0xdbfbe000 00040
ACPI: APIC 0xdbfb0390 000B0 (v1 SUN X4200 M2 00000104 MSFT 00000097)
ACPI: SPCR 0xdbfb0440 00050 (v1 SUN X4200 M2 00000104 MSFT 00000097)
ACPI: SLIT 0xdbfb0490 00030 (v1 SUN X4200 M2 00000104 MSFT 00000097)
ACPI: SPMI 0xdbfb04c0 00041 (v5 SUN OEMSPMI 00000104 MSFT 00000097)
ACPI: OEMB 0xdbfbe040 00063 (v1 SUN X4200 M2 00000104 MSFT 00000097)
ACPI: SRAT 0xdbfb7540 00110 (v1 AMD FAM_F_10 00000002 AMD 00000001)
ACPI: HPET 0xdbfb7650 00038 (v1 SUN OEMHPET0 00000104 MSFT 00000097)
ACPI: IPET 0xdbfb7690 00038 (v1 SUN OEMHPET1 00000104 MSFT 00000097)
ACPI: EINJ 0xdbfb76d0 00130 (v1 AMIER AMI_EINJ 04000909 MSFT 00000097)
ACPI: BERT 0xdbfb7860 00030 (v1 AMIER AMI_BERT 04000909 MSFT 00000097)
ACPI: ERST 0xdbfb7890 001B0 (v1 AMIER AMI_ERST 04000909 MSFT 00000097)
ACPI: HEST 0xdbfb7a40 000A8 (v1 AMIER AMI_HEST 04000909 MSFT 00000097)
ACPI: SSDT 0xdbfb7af0 00574 (v1 A M I POWERNOW 00000001 AMD 00000001)
MADT: Found IO APIC ID 15, Interrupt 0 at 0xfec00000
ioapic0: Routing external 8259A's -> intpin 0
MADT: Found IO APIC ID 16, Interrupt 48 at 0xfeafd000
ioapic1: Changing APIC ID to 16
ioapic1: WARNING: intbase 48 !=3D expected base 24
MADT: Found IO APIC ID 17, Interrupt 56 at 0xfeafc000
ioapic2: Changing APIC ID to 17
ioapic2: WARNING: intbase 56 !=3D expected base 55
MADT: Found IO APIC ID 14, Interrupt 24 at 0xfeaff000
ioapic3: WARNING: intbase 24 !=3D expected base 63
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic3 <Version 1.1> irqs 24-47 on motherboard
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 48-54 on motherboard
ioapic2 <Version 1.1> irqs 56-62 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000100ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
wlan: <802.11 Link Layer>
kbd: new array size 4
kbd1 at kbdmux0
mem: <memory>
nfslock: pseudo-device
null: <null device, zero device>
random: <entropy source, Software, Yarrow>
io: <I/O>
hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2
acpi0: <SUN X4200 M2> on motherboard
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 0 vector 48
acpi0: [MPSAFE]
acpi0: [ITHREAD]
ACPI: Executed 1 blocks of module-level executable AML code
acpi0: Power Button (fixed)
acpi0: wakeup code va 0xffffff8000031000 pa 0x4000
AcpiOsDerivePciId: \_SB_.PCI0.MAP0.CFG_ -> bus 0 dev 24 func 1
unknown: I/O range not supported
AcpiOsDerivePciId: \_SB_.PCI0.SBRG.BAR0 -> bus 0 dev 1 func 0
AcpiOsDerivePciId: \_SB_.PCIB.IO84.BAR1 -> bus 128 dev 1 func 0
AcpiOsDerivePciId: \_SB_.PCIC.IO42.BAR2 -> bus 255 dev 1 func 0
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dbf00000 (3) failed
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x2008-0x200b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu0: switching to generic Cx mode
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pci_link0: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link1: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link2: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link3: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link4: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 16 17 18 19
Validation 0 255 N 0 16 17 18 19
After Disable 0 255 N 0 16 17 18 19
pci_link5: Index IRQ Rtd Ref IRQs
Initial Probe 0 11 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link6: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link7: Index IRQ Rtd Ref IRQs
Initial Probe 0 5 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link8: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link9: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link10: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link11: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link12: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link13: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link14: Index IRQ Rtd Ref IRQs
Initial Probe 0 14 N 0 20 21 22
Validation 0 255 N 0 20 21 22
After Disable 0 255 N 0 20 21 22
pci_link15: Index IRQ Rtd Ref IRQs
Initial Probe 0 10 N 0 40 41 42 43
Validation 0 255 N 0 40 41 42 43
After Disable 0 255 N 0 40 41 42 43
pci_link16: Index IRQ Rtd Ref IRQs
Initial Probe 0 6 N 0 40 41 42 43
Validation 0 255 N 0 40 41 42 43
After Disable 0 255 N 0 40 41 42 43
pci_link17: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 40 41 42 43
Validation 0 255 N 0 40 41 42 43
After Disable 0 255 N 0 40 41 42 43
pci_link18: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 40 41 42 43
Validation 0 255 N 0 40 41 42 43
After Disable 0 255 N 0 40 41 42 43
pci_link19: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 40 41 42 43
Validation 0 255 N 0 40 41 42 43
After Disable 0 255 N 0 40 41 42 43
pci_link20: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 40 41 42 43
Validation 0 255 N 0 40 41 42 43
After Disable 0 255 N 0 40 41 42 43
pci_link21: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 40 41 42 43
Validation 0 255 N 0 40 41 42 43
After Disable 0 255 N 0 40 41 42 43
pci_link22: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 40 41 42 43
Validation 0 255 N 0 40 41 42 43
After Disable 0 255 N 0 40 41 42 43
pci_link23: Index IRQ Rtd Ref IRQs
Initial Probe 0 7 N 0 44 45 46 47
Validation 0 255 N 0 44 45 46 47
After Disable 0 255 N 0 44 45 46 47
pci_link24: Index IRQ Rtd Ref IRQs
Initial Probe 0 15 N 0 44 45 46 47
Validation 0 255 N 0 44 45 46 47
After Disable 0 255 N 0 44 45 46 47
pci_link25: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 44 45 46 47
Validation 0 255 N 0 44 45 46 47
After Disable 0 255 N 0 44 45 46 47
pci_link26: Index IRQ Rtd Ref IRQs
Initial Probe 0 255 N 0 44 45 46 47
Validation 0 255 N 0 44 45 46 47
After Disable 0 255 N 0 44 45 46 47
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on =
acpi0
acpi_hpet0: vend: 0x10de rev: 0x1 num: 3 hz: 25000000 opts: legacy_route
Timecounter "HPET" frequency 25000000 Hz quality 900
pcib0: <ACPI Host-PCI bridge> on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: domain=3D0, physical bus=3D0
found-> vendor=3D0x10de, dev=3D0x005e, revid=3D0xa3
domain=3D0, bus=3D0, slot=3D0, func=3D0
class=3D05-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0106, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x10de, dev=3D0x0051, revid=3D0xf3
domain=3D0, bus=3D0, slot=3D1, func=3D0
class=3D06-01-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x00a0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x10de, dev=3D0x0052, revid=3D0xa2
domain=3D0, bus=3D0, slot=3D1, func=3D1
class=3D0c-05-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0001, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 =
(250 ns)
intpin=3Da, irq=3D255
powerspec 2 supports D0 D3 current D0
map[10]: type I/O Port, range 32, base 0x9200, size 5, enabled
map[20]: type I/O Port, range 32, base 0x400, size 6, enabled
map[24]: type I/O Port, range 32, base 0x440, size 6, enabled
found-> vendor=3D0x10de, dev=3D0x005a, revid=3D0xa2
domain=3D0, bus=3D0, slot=3D2, func=3D0
class=3D0c-03-10, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 =
(250 ns)
intpin=3Da, irq=3D11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe3ff000, size 12, =
enabled
pcib0: matched entry for 0.2.INTA (src \_SB_.LUS0:0)
pci_link5: Picked IRQ 20 with weight 0
pcib0: slot 2 INTA routed to irq 20 via \_SB_.LUS0
found-> vendor=3D0x10de, dev=3D0x005b, revid=3D0xa3
domain=3D0, bus=3D0, slot=3D2, func=3D1
class=3D0c-03-20, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0006, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 =
(250 ns)
intpin=3Db, irq=3D5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe3fec00, size 8, =
enabled
pcib0: matched entry for 0.2.INTB (src \_SB_.LUS2:0)
pci_link7: Picked IRQ 21 with weight 0
pcib0: slot 2 INTB routed to irq 21 via \_SB_.LUS2
found-> vendor=3D0x10de, dev=3D0x0053, revid=3D0xf2
domain=3D0, bus=3D0, slot=3D6, func=3D0
class=3D01-01-8a, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0005, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x03 (750 ns), maxlat=3D0x01 =
(250 ns)
powerspec 2 supports D0 D3 current D0
map[20]: type I/O Port, range 32, base 0x9100, size 4, enabled
found-> vendor=3D0x10de, dev=3D0x005c, revid=3D0xf2
domain=3D0, bus=3D0, slot=3D9, func=3D0
class=3D06-04-01, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0107, statreg=3D0x00a0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x0b (2750 ns), maxlat=3D0x02 =
(500 ns)
found-> vendor=3D0x10de, dev=3D0x0057, revid=3D0xf3
domain=3D0, bus=3D0, slot=3D10, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x01 (250 ns), maxlat=3D0x14 =
(5000 ns)
intpin=3Da, irq=3D15
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfe3fd000, size 12, =
enabled
map[14]: type I/O Port, range 32, base 0xdc00, size 3, enabled
pcib0: matched entry for 0.10.INTA (src \_SB_.LKLN:0)
pci_link8: Picked IRQ 22 with weight 0
pcib0: slot 10 INTA routed to irq 22 via \_SB_.LKLN
found-> vendor=3D0x10de, dev=3D0x005d, revid=3D0xf3
domain=3D0, bus=3D0, slot=3D11, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0046, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=3D0x10de, dev=3D0x005d, revid=3D0xf3
domain=3D0, bus=3D0, slot=3D12, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0046, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=3D0x10de, dev=3D0x005d, revid=3D0xf3
domain=3D0, bus=3D0, slot=3D13, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0046, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=3D0x10de, dev=3D0x005d, revid=3D0xa3
domain=3D0, bus=3D0, slot=3D14, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0046, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00
domain=3D0, bus=3D0, slot=3D24, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00
domain=3D0, bus=3D0, slot=3D24, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00
domain=3D0, bus=3D0, slot=3D24, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00
domain=3D0, bus=3D0, slot=3D24, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1100, revid=3D0x00
domain=3D0, bus=3D0, slot=3D25, func=3D0
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1101, revid=3D0x00
domain=3D0, bus=3D0, slot=3D25, func=3D1
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1102, revid=3D0x00
domain=3D0, bus=3D0, slot=3D25, func=3D2
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0000, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x1022, dev=3D0x1103, revid=3D0x00
domain=3D0, bus=3D0, slot=3D25, func=3D3
class=3D06-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0000, statreg=3D0x0010, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
pci0: <memory> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <OHCI (generic) USB controller> mem 0xfe3ff000-0xfe3fffff irq 20 =
at device 2.0 on pci0
ohci0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe3ff000
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 0 vector 49
ohci0: [MPSAFE]
ohci0: [ITHREAD]
usbus0: <OHCI (generic) USB controller> on ohci0
ehci0: <NVIDIA nForce4 USB 2.0 controller> mem 0xfe3fec00-0xfe3fecff irq =
21 at device 2.1 on pci0
ehci0: Reserved 0x100 bytes for rid 0x10 type 3 at 0xfe3fec00
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 0 vector 50
ehci0: [MPSAFE]
ehci0: [ITHREAD]
ehci0: Doorbell workaround enabled
usbus1: EHCI version 1.0
usbus1: <NVIDIA nForce4 USB 2.0 controller> on ehci0
atapci0: <nVidia nForce CK804 UDMA133 controller> port =
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x9100-0x910f at device 6.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0x9100
ata0: <ATA channel 0> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=3D03 ostat0=3D50 ostat1=3D00
ata0: stat0=3D0x00 err=3D0x01 lsb=3D0x14 msb=3D0xeb
ata0: stat1=3D0x00 err=3D0x00 lsb=3D0x00 msb=3D0x00
ata0: reset tp2 stat0=3D00 stat1=3D00 devices=3D0x10000
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 0 vector 51
ata0: [MPSAFE]
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=3D00 ostat0=3Dff ostat1=3Dff
ioapic0: routing intpin 15 (ISA IRQ 15) to lapic 0 vector 52
ata1: [MPSAFE]
ata1: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 9.0 on pci0
pcib1: domain 0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xc000-0xcfff
pcib1: memory decode 0xfc200000-0xfe2fffff
pcib1: no prefetched decode
pcib1: Subtractively decoded bridge.
pci1: <ACPI PCI bus> on pcib1
pci1: domain=3D0, physical bus=3D1
found-> vendor=3D0x1002, dev=3D0x4752, revid=3D0x27
domain=3D0, bus=3D1, slot=3D3, func=3D0
class=3D03-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0087, statreg=3D0x0290, cachelnsz=3D16 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x08 (2000 ns), maxlat=3D0x00 =
(0 ns)
intpin=3Da, irq=3D10
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfd000000, size 24, =
enabled
pcib1: requested memory range 0xfd000000-0xfdffffff: good
map[14]: type I/O Port, range 32, base 0xc800, size 8, enabled
pcib1: requested I/O range 0xc800-0xc8ff: in range
map[18]: type Memory, range 32, base 0xfe2ff000, size 12, =
enabled
pcib1: requested memory range 0xfe2ff000-0xfe2fffff: good
pcib1: matched entry for 1.3.INTA (src \_SB_.LNKA:0)
pci_link0: Picked IRQ 16 with weight 0
pcib1: slot 3 INTA routed to irq 16 via \_SB_.LNKA
vgapci0: <VGA-compatible display> port 0xc800-0xc8ff mem =
0xfd000000-0xfdffffff,0xfe2ff000-0xfe2fffff irq 16 at device 3.0 on pci1
nfe0: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xdc00-0xdc07 =
mem 0xfe3fd000-0xfe3fdfff irq 22 at device 10.0 on pci0
nfe0: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfe3fd000
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus0
e1000phy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, =
1000baseSX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe0: bpf attached
nfe0: Ethernet address: 00:14:4f:8d:fe:ea
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 0 vector 53
nfe0: [MPSAFE]
nfe0: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 11.0 on pci0
pcib2: domain 0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0x0-0x0
pcib2: no prefetched decode
pcib2: could not get PCI interrupt routing table for \_SB_.PCI0.P0P2 - =
AE_NOT_FOUND
pci2: <ACPI PCI bus> on pcib2
pci2: domain=3D0, physical bus=3D2
pcib3: <ACPI PCI-PCI bridge> at device 12.0 on pci0
pcib3: domain 0
pcib3: secondary bus 3
pcib3: subordinate bus 3
pcib3: I/O decode 0x0-0x0
pcib3: no prefetched decode
pcib3: could not get PCI interrupt routing table for \_SB_.PCI0.P0P3 - =
AE_NOT_FOUND
pci3: <ACPI PCI bus> on pcib3
pci3: domain=3D0, physical bus=3D3
pcib4: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pcib4: domain 0
pcib4: secondary bus 4
pcib4: subordinate bus 4
pcib4: I/O decode 0x0-0x0
pcib4: no prefetched decode
pci4: <ACPI PCI bus> on pcib4
pci4: domain=3D0, physical bus=3D4
pcib5: <ACPI PCI-PCI bridge> at device 14.0 on pci0
pcib5: domain 0
pcib5: secondary bus 5
pcib5: subordinate bus 5
pcib5: I/O decode 0x0-0x0
pcib5: no prefetched decode
pci5: <ACPI PCI bus> on pcib5
pci5: domain=3D0, physical bus=3D5
pcib6: <ACPI Host-PCI bridge> on acpi0
pci128: <ACPI PCI bus> on pcib6
pci128: domain=3D0, physical bus=3D128
found-> vendor=3D0x10de, dev=3D0x005e, revid=3D0xa3
domain=3D0, bus=3D128, slot=3D0, func=3D0
class=3D05-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0106, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
found-> vendor=3D0x10de, dev=3D0x00d3, revid=3D0xf3
domain=3D0, bus=3D128, slot=3D1, func=3D0
class=3D05-80-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x000f, statreg=3D0x00a0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
map[14]: type Memory, range 32, base 0xfeaff000, size 12, =
enabled
found-> vendor=3D0x10de, dev=3D0x0057, revid=3D0xf3
domain=3D0, bus=3D128, slot=3D10, func=3D0
class=3D06-80-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0007, statreg=3D0x00b0, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x01 (250 ns), maxlat=3D0x14 =
(5000 ns)
intpin=3Da, irq=3D7
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type Memory, range 32, base 0xfeafe000, size 12, =
enabled
map[14]: type I/O Port, range 32, base 0xfc00, size 3, enabled
pcib6: matched entry for 128.10.INTA (src \_SB_.LK2N:0)
pci_link23: Picked IRQ 44 with weight 0
pcib6: slot 10 INTA routed to irq 44 via \_SB_.LK2N
found-> vendor=3D0x10de, dev=3D0x005d, revid=3D0xf3
domain=3D0, bus=3D128, slot=3D11, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0046, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=3D0x10de, dev=3D0x005d, revid=3D0xf3
domain=3D0, bus=3D128, slot=3D12, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0046, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=3D0x10de, dev=3D0x005d, revid=3D0xf3
domain=3D0, bus=3D128, slot=3D13, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0046, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=3D0x10de, dev=3D0x005d, revid=3D0xa3
domain=3D0, bus=3D128, slot=3D14, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D0
cmdreg=3D0x0046, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
powerspec 2 supports D0 D3 current D0
MSI supports 2 messages, 64 bit
found-> vendor=3D0x1022, dev=3D0x7458, revid=3D0x12
domain=3D0, bus=3D128, slot=3D16, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
cmdreg=3D0x0156, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
found-> vendor=3D0x1022, dev=3D0x7459, revid=3D0x12
domain=3D0, bus=3D128, slot=3D16, func=3D1
class=3D08-00-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
map[10]: type Memory, range 64, base 0xfeafd000, size 12, =
enabled
found-> vendor=3D0x1022, dev=3D0x7458, revid=3D0x12
domain=3D0, bus=3D128, slot=3D17, func=3D0
class=3D06-04-00, hdrtype=3D0x01, mfdev=3D1
cmdreg=3D0x0157, statreg=3D0x0010, cachelnsz=3D16 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0x07 (1750 ns), maxlat=3D0x00 =
(0 ns)
found-> vendor=3D0x1022, dev=3D0x7459, revid=3D0x12
domain=3D0, bus=3D128, slot=3D17, func=3D1
class=3D08-00-10, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0006, statreg=3D0x0200, cachelnsz=3D0 (dwords)
lattimer=3D0x00 (0 ns), mingnt=3D0x00 (0 ns), maxlat=3D0x00 (0 =
ns)
map[10]: type Memory, range 64, base 0xfeafc000, size 12, =
enabled
pci128: <memory> at device 0.0 (no driver attached)
pci128: <memory> at device 1.0 (no driver attached)
nfe1: <NVIDIA nForce4 CK804 MCP9 Networking Adapter> port 0xfc00-0xfc07 =
mem 0xfeafe000-0xfeafefff irq 44 at device 10.0 on pci128
nfe1: Reserved 0x1000 bytes for rid 0x10 type 3 at 0xfeafe000
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1111 Gigabit PHY> PHY 1 on miibus1
e1000phy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseSX, =
1000baseSX-FDX, 1000baseT, 1000baseT-FDX, auto
nfe1: bpf attached
nfe1: Ethernet address: 00:14:4f:8d:fe:eb
ioapic3: routing intpin 20 (PCI IRQ 44) to lapic 0 vector 54
nfe1: [MPSAFE]
nfe1: [FILTER]
pcib7: <ACPI PCI-PCI bridge> at device 11.0 on pci128
pcib7: domain 0
pcib7: secondary bus 129
pcib7: subordinate bus 129
pcib7: I/O decode 0x0-0x0
pcib7: no prefetched decode
pcib7: could not get PCI interrupt routing table for \_SB_.PCIB.BR5B - =
AE_NOT_FOUND
pci129: <ACPI PCI bus> on pcib7
pci129: domain=3D0, physical bus=3D129
pcib8: <ACPI PCI-PCI bridge> at device 12.0 on pci128
pcib8: domain 0
pcib8: secondary bus 130
pcib8: subordinate bus 130
pcib8: I/O decode 0x0-0x0
pcib8: no prefetched decode
pcib8: could not get PCI interrupt routing table for \_SB_.PCIB.BR5C - =
AE_NOT_FOUND
pci130: <ACPI PCI bus> on pcib8
pci130: domain=3D0, physical bus=3D130
pcib9: <ACPI PCI-PCI bridge> at device 13.0 on pci128
pcib9: domain 0
pcib9: secondary bus 131
pcib9: subordinate bus 131
pcib9: I/O decode 0x0-0x0
pcib9: no prefetched decode
pci131: <ACPI PCI bus> on pcib9
pci131: domain=3D0, physical bus=3D131
pcib10: <ACPI PCI-PCI bridge> at device 14.0 on pci128
pcib10: domain 0
pcib10: secondary bus 132
pcib10: subordinate bus 132
pcib10: I/O decode 0x0-0x0
pcib10: no prefetched decode
pci132: <ACPI PCI bus> on pcib10
pci132: domain=3D0, physical bus=3D132
pcib11: <ACPI PCI-PCI bridge> at device 16.0 on pci128
pcib11: domain 0
pcib11: secondary bus 133
pcib11: subordinate bus 133
pcib11: I/O decode 0x0-0x0
pcib11: no prefetched decode
pci133: <ACPI PCI bus> on pcib11
pci133: domain=3D0, physical bus=3D133
pcib12: <ACPI PCI-PCI bridge> at device 17.0 on pci128
pcib12: domain 0
pcib12: secondary bus 134
pcib12: subordinate bus 134
pcib12: I/O decode 0xe000-0xefff
pcib12: memory decode 0xfe500000-0xfe9fffff
pcib12: no prefetched decode
pci134: <ACPI PCI bus> on pcib12
pci134: domain=3D0, physical bus=3D134
found-> vendor=3D0x8086, dev=3D0x1010, revid=3D0x03
domain=3D0, bus=3D134, slot=3D1, func=3D0
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0xff (63750 ns), maxlat=3D0x00=
(0 ns)
intpin=3Da, irq=3D10
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe9e0000, size 17, =
enabled
pcib12: requested memory range 0xfe9e0000-0xfe9fffff: good
map[20]: type I/O Port, range 32, base 0xec00, size 6, enabled
pcib12: requested I/O range 0xec00-0xec3f: in range
pcib12: matched entry for 134.1.INTA
pcib12: slot 1 INTA hardwired to IRQ 56
found-> vendor=3D0x8086, dev=3D0x1010, revid=3D0x03
domain=3D0, bus=3D134, slot=3D1, func=3D1
class=3D02-00-00, hdrtype=3D0x00, mfdev=3D1
cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords)
lattimer=3D0x40 (1920 ns), mingnt=3D0xff (63750 ns), maxlat=3D0x00=
(0 ns)
intpin=3Db, irq=3D6
powerspec 2 supports D0 D3 current D0
MSI supports 1 message, 64 bit
map[10]: type Memory, range 64, base 0xfe9c0000, size 17, =
enabled
pcib12: requested memory range 0xfe9c0000-0xfe9dffff: good
map[20]: type I/O Port, range 32, base 0xe800, size 6, enabled
pcib12: requested I/O range 0xe800-0xe83f: in range
pcib12: matched entry for 134.1.INTB
pcib12: slot 1 INTB hardwired to IRQ 57
found-> vendor=3D0x1000, dev=3D0x0050, revid=3D0x02
domain=3D0, bus=3D134, slot=3D2, func=3D0
class=3D01-00-00, hdrtype=3D0x00, mfdev=3D0
cmdreg=3D0x0157, statreg=3D0x0230, cachelnsz=3D16 (dwords)
lattimer=3D0x48 (2160 ns), mingnt=3D0x40 (16000 ns), maxlat=3D0x0a=
(2500 ns)
intpin=3Da, irq=3D7
powerspec 2 supports D0 D1 D2 D3 current D0
MSI supports 1 message, 64 bit
MSI-X supports 1 message in map 0x14
map[10]: type I/O Port, range 32, base 0xe400, size 8, enabled
pcib12: requested I/O range 0xe400-0xe4ff: in range
map[14]: type Memory, range 64, base 0xfe9bc000, size 14, =
enabled
pcib12: requested memory range 0xfe9bc000-0xfe9bffff: good
map[1c]: type Memory, range 64, base 0xfe9a0000, size 16, =
enabled
pcib12: requested memory range 0xfe9a0000-0xfe9affff: good
pcib12: matched entry for 134.2.INTA
pcib12: slot 2 INTA hardwired to IRQ 58
em0: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port =
0xec00-0xec3f mem 0xfe9e0000-0xfe9fffff irq 56 at device 1.0 on pci134
em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9e0000
em0: Reserved 0x40 bytes for rid 0x20 type 4 at 0xec00
ioapic2: routing intpin 0 (PCI IRQ 56) to lapic 0 vector 55
em0: [FILTER]
em0: bpf attached
em0: Ethernet address: 00:14:4f:8d:fe:ec
em1: <Intel(R) PRO/1000 Legacy Network Connection 1.0.1> port =
0xe800-0xe83f mem 0xfe9c0000-0xfe9dffff irq 57 at device 1.1 on pci134
em1: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfe9c0000
em1: Reserved 0x40 bytes for rid 0x20 type 4 at 0xe800
ioapic2: routing intpin 1 (PCI IRQ 57) to lapic 0 vector 56
em1: [FILTER]
em1: bpf attached
em1: Ethernet address: 00:14:4f:8d:fe:ed
mpt0: <LSILogic SAS/SATA Adapter> port 0xe400-0xe4ff mem =
0xfe9bc000-0xfe9bffff,0xfe9a0000-0xfe9affff irq 58 at device 2.0 on =
pci134
mpt0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xe400
mpt0: Reserved 0x4000 bytes for rid 0x14 type 3 at 0xfe9bc000
ioapic2: routing intpin 2 (PCI IRQ 58) to lapic 0 vector 57
mpt0: [MPSAFE]
mpt0: [ITHREAD]
mpt0: MPI Version=3D1.5.20.0
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x12 (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0x16 (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not =
required).
mpt0: No Handlers For Any Event Notify Frames. Event 0xf (ACK not =
required).
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (14 Max)
mpt0: No Handlers For Any Event Notify Frames. Event 0xa (ACK not =
required).
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atrtc0: registered as a time-of-day clock (resolution 1000000us)
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
ioapic0: routing intpin 4 (ISA IRQ 4) to lapic 0 vector 58
uart0: [FILTER]
uart0: fast interrupt
uart0: console (9600,n,8,1)
ex_isa_identify()
ahc_isa_probe 0: ioport 0xc00 alloc failed
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
atrtc: atrtc0 already exists; skipping it
sc: sc0 already exists; skipping it
uart: uart0 already exists; skipping it
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem =
0xc0000-0xc9fff,0xca000-0xcb7ff,0xcb800-0xcc7ff,0xcc800-0xcd7ff,0xd3800-0x=
d47ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sc0: fb0, kbd1, terminal emulator: scteken (teken terminal)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on =
isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
kbd0: atkbd0, generic (0), config:0x0, flags:0x3f0000
ioapic0: routing intpin 1 (ISA IRQ 1) to lapic 0 vector 59
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: RESET_AUX return code:00fe
kbdc: DIAGNOSE status:0055
kbdc: TEST_KBD_PORT status:0000
psm0: failed to reset the aux device.
fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ppc0: cannot reserve I/O port range
ppc0: <Parallel port> failed to probe at irq 7 on isa0
uart1: <ns8250> failed to probe at port 0x2f8-0x2ff irq 3 on isa0
isa_probe_children: probing PnP devices
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
powernow2: <PowerNow! K8> on cpu2
powernow3: <PowerNow! K8> on cpu3
Device configuration finished.
Reducing kern.maxvnodes 1031944 -> 100000
procfs registered
ZFS filesystem version 3
ZFS storage pool version 14
lapic: Divisor 2, Frequency 99735545 Hz
Timecounter "TSC" frequency 2792595272 Hz quality -100
Timecounters tick every 1.000 msec
vlan: initialized, using hash tables with chaining
ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based =
forwarding disabled, default to accept, logging disabled
ipfw0: bpf attached
lo0: bpf attached
hptrr: no controller detected.
ata0: Identifying devices: 00010000
ata0: New devices: 00010000
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ata0-master: pio=3DPIO4 wdma=3DWDMA2 udma=3DUDMA33 cable=3D40 wire
acd0: setting UDMA33
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on =
usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on =
usbus1
acd0: <DW-224SL-R/1.0A> CDRW drive at ata0 as master
acd0: read 4134KB/s (4134KB/s) write 4134KB/s (4134KB/s), 1654KB buffer, =
UDMA33=20
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet
acd0: Writes: CDR, CDRW, test write
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable caddy, unlocked
acd0: Medium: no/blank disc
ata1: Identifying devices: 00000000
ata1: New devices: 00000000
uhub0: 7 ports with 7 removable, self powered
uhub1: 7 ports with 7 removable, self powered
(probe71:mpt0:1:8:0): Error 22, Unretryable error
(probe72:mpt0:1:9:0): Error 22, Unretryable error
(probe73:mpt0:1:10:0): Error 22, Unretryable error
(probe74:mpt0:1:11:0): Error 22, Unretryable error
(probe75:mpt0:1:12:0): Error 22, Unretryable error
(probe76:mpt0:1:13:0): Error 22, Unretryable error
(probe63:mpt0:1:0:0): Error 22, Unretryable error
(probe64:mpt0:1:1:0): Error 22, Unretryable error
(probe65:mpt0:1:2:0): Error 22, Unretryable error
(probe66:mpt0:1:3:0): Error 22, Unretryable error
(probe67:mpt0:1:4:0): Error 22, Unretryable error
(probe68:mpt0:1:5:0): Error 22, Unretryable error
(probe69:mpt0:1:6:0): Error 22, Unretryable error
(probe70:mpt0:1:7:0): Error 22, Unretryable error
pass0 at mpt0 bus 0 scbus0 target 2 lun 0
pass0: <SEAGATE ST973402SSUN72G 0400> Fixed Direct Access SCSI-5 device=20=
pass0: Serial Number 18216LAX 3NP16LAX
pass0: 300.000MB/s transfers
pass0: Command Queueing enabled
da0 at mpt0 bus 0 scbus0 target 2 lun 0
da0: <SEAGATE ST973402SSUN72G 0400> Fixed Direct Access SCSI-5 device=20
da0: Serial Number 18216LAX 3NP16LAX
da0: 300.000MB/s transfers
da0: Command Queueing enabled
da0: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
da1 at mpt0 bus 0 scbus0 target 3 lun 0
da1: <SEAGATE ST973402SSUN72G 0400> Fixed Direct Access SCSI-5 device=20
da1: Serial Number 16216D68 3NP16D68
da1: 300.000MB/s transfers
da1: Command Queueing enabled
da1: 70007MB (143374738 512 byte sectors: 255H 63S/T 8924C)
GEOM: new disk da0
GEOM: new disk da1
pass1 at mpt0 bus 0 scbus0 target 3 lun 0
pass1: <SEAGATE ST973402SSUN72G 0400> Fixed Direct Access SCSI-5 device=20=
pass1: Serial Number 16216D68 3NP16D68
pass1: 300.000MB/s transfers
pass1: Command Queueing enabled
ATA PseudoRAID loaded
SMP: AP CPU #1 Launched!
cpu1 AP:
ID: 0x01000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #3 Launched!
cpu3 AP:
ID: 0x03000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
SMP: AP CPU #2 Launched!
cpu2 AP:
ID: 0x02000000 VER: 0x80050010 LDR: 0x00000000 DFR: 0xffffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
timer: 0x000200ef therm: 0x00010000 err: 0x000000f0 pmc: 0x00010400
(folaopwitca0b:l er oculteiannge ri nsttpairnt e4d=20
ISA IRQ 4) to lapic 1 vector 48
ioapic0: routing intpin 9 (ISA IRQ 9) to lapic 2 vector 48
ioapic0: routing intpin 14 (ISA IRQ 14) to lapic 3 vector 48
ioapic0: routing intpin 20 (PCI IRQ 20) to lapic 1 vector 49
ioapic0: routing intpin 21 (PCI IRQ 21) to lapic 2 vector 49
ioapic0: routing intpin 22 (PCI IRQ 22) to lapic 3 vector 49
ioapic2: routing intpin 0 (PCI IRQ 56) to lapic 1 vector 50
ioapic2: routing intpin 1 (PCI IRQ 57) to lapic 2 vector 50
ioapic2: routing intpin 2 (PCI IRQ 58) to lapic 3 vector 50
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?6B57591F-9FA2-45EB-825F-1DB025C0635D>