Date: Wed, 29 Sep 2004 08:42:32 -0500 From: <Muthu_T@Dell.com> To: <freebsd-current@freebsd.org> Subject: PE2850 + FreeBSD 5.3-BETA6 - Keyboard not working Message-ID: <71F713C5E3CB7F4F9ACCBBB8E9BE318A1E1DD2@blrx2kmbgl101.blr.amer.dell.com>
next in thread | raw e-mail | index | archive | help
All,
Successfully installed FreeBSD 5.3-BETA6 on Dell PE2860.
After rebooting in the login prompt the system doesn't accept any
keystrokes.
I have 1 USB and 1 PS/2 Keyboard. Both keyboards are working (caps
on/off, Numlock on/off works), but the characters doesn't comes to the
system console.
Attaching the dmesg output.
Looks like DELL DRAC (Dell Remote Access Card) card is identified as
Keyboard.=20
See the line: (ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1)
Any fixes?
------------------------------------------------------------------------
-------------------------
Copyright (c) 1992-2004 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
reserved.
FreeBSD 5.3-BETA6 #0: Sat Sep 25 19:41:14 UTC 2004
root@wv1u.samsco.home:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3391.52-MHz 686-class CPU)
Origin =3D "GenuineIntel" Id =3D 0xf34 Stepping =3D 4
=20
Features=3D0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PG=
E
,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Hyperthreading: 2 logical CPUs
real memory =3D 1073479680 (1023 MB)
avail memory =3D 1040932864 (992 MB)
ACPI APIC Table: <DELL PE BKC >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
cpu0 (BSP): APIC ID: 0
cpu1 (AP): APIC ID: 1
cpu2 (AP): APIC ID: 6
cpu3 (AP): APIC ID: 7
ioapic0: Changing APIC ID to 8
ioapic1: Changing APIC ID to 9
ioapic1: WARNING: intbase 32 !=3D expected base 24
ioapic2: Changing APIC ID to 10
ioapic2: WARNING: intbase 64 !=3D expected base 56
ioapic3: Changing APIC ID to 11
ioapic3: WARNING: intbase 96 !=3D expected base 88
ioapic0 <Version 2.0> irqs 0-23 on motherboard
ioapic1 <Version 2.0> irqs 32-55 on motherboard
ioapic2 <Version 2.0> irqs 64-87 on motherboard
ioapic3 <Version 2.0> irqs 96-119 on motherboard
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <DELL PE BKC> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 0.0 on pci1
pci2: <ACPI PCI bus> on pcib2
amr0: <LSILogic MegaRAID> mem
0xdfdc0000-0xdfdfffff,0xd80f0000-0xd80fffff irq 46 at device 14.0 on
pci2
amr0: [GIANT-LOCKED]
amr0: <LSILogic PERC 4e/Di> Firmware 513O, BIOS H418, 256MB RAM
pcib3: <ACPI PCI-PCI bridge> at device 0.2 on pci1
pci3: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> at device 4.0 on pci0
pci4: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 5.0 on pci0
pci5: <ACPI PCI bus> on pcib5
pcib6: <ACPI PCI-PCI bridge> at device 0.0 on pci5
pci6: <ACPI PCI bus> on pcib6
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xecc0-0xecff mem 0xdfae0000-0xdfafffff irq 64 at device 7.0 on pci6
em0: Ethernet address: 00:11:43:30:cc:1e
em0: Speed:N/A Duplex:N/A
pcib7: <ACPI PCI-PCI bridge> at device 0.2 on pci5
pci7: <ACPI PCI bus> on pcib7
em1: <Intel(R) PRO/1000 Network Connection, Version - 1.7.25> port
0xdcc0-0xdcff mem 0xdf8e0000-0xdf8fffff irq 65 at device 8.0 on pci7
em1: Ethernet address: 00:11:43:30:cc:1f
em1: Speed:N/A Duplex:N/A
pcib8: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci8: <ACPI PCI bus> on pcib8
pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci8
pci9: <ACPI PCI bus> on pcib9
pcib10: <ACPI PCI-PCI bridge> at device 0.2 on pci8
pci10: <ACPI PCI bus> on pcib10
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xbce0-0xbcff
irq 16 at device 29.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ukbd0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
kbd1 at ukbd0
ums0: Dell DRAC4, rev 1.10/0.00, addr 2, iclass 3/1
ums0: X report 0x0002 not supported
device_attach: ums0 attach returned 6
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xbcc0-0xbcdf
irq 19 at device 29.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhub2: Dell product 0xa001, class 9/0, rev 2.00/0.00, addr 2
uhub2: 2 ports with 2 removable, self powered
ukbd1: CHICONY USB Keyboard, rev 1.10/1.03, addr 3, iclass 3/1
kbd2 at ukbd1
ums0: CHICONY USB Keyboard, rev 1.10/1.03, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xbca0-0xbcbf
irq 18 at device 29.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> at device 29.7 (no driver attached)
pcib11: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci11: <ACPI PCI bus> on pcib11
pci11: <unknown> at device 5.0 (no driver attached)
pci11: <unknown> at device 5.1 (no driver attached)
pci11: <unknown> at device 5.2 (no driver attached)
atapci0: <SiI 0680 UDMA133 controller> port
0xcc70-0xcc7f,0xccd0-0xccd3,0xccd8-0xccdf,0xcce4-0xcce7,0xccf0-0xccf7
irq 23 at device 6.0 on pci11
ata2: channel #0 on atapci0
ata3: channel #1 on atapci0
pci11: <display, VGA> at device 13.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH5 UDMA100 controller> port
0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: channel #0 on atapci1
ata1: channel #1 on atapci1
fdc0: <floppy drive controller> port 0x3f7,0x3f0-0x3f5 irq 6 drq 2 on
acpi0
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
orm0: <ISA Option ROMs> at iomem
0xec000-0xeffff,0xd2800-0xd37ff,0xcb000-0xcbfff,0xc0000-0xcafff on isa0
pmtimer0 on isa0
ppc0: parallel port not found.
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=3D0x300>
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
Timecounters tick every 10.000 msec
ATAPI_RESET time =3D 20us
acd0: CDROM <TEAC CD-ROM CD-224E/K.9A> at ata0-master UDMA33
ATAPI_RESET time =3D 540us
ATAPI_RESET time =3D 570us
ata2-master: FAILURE - SETFEATURES SET TRANSFER MODE
status=3D41<READY,ERROR> error=3D4<ABORTED>
ata2-slave: FAILURE - SETFEATURES SET TRANSFER MODE
status=3D41<READY,ERROR> error=3D4<ABORTED>
acd1: CDROM <VIRTUALCDROM DRIVE/> at ata2-slave BIOSPIO
amrd0: <LSILogic MegaRAID logical drive> on amr0
amrd0: 34680MB (71024640 sectors) RAID 1 (optimal)
amrd1: <LSILogic MegaRAID logical drive> on amr0
amrd1: 104040MB (213073920 sectors) RAID 5 (optimal)
ses0 at amr0 bus 0 target 6 lun 0
ses0: <PE/PV 1x2 SCSI BP 1.0> Fixed Processor SCSI-2 device=20
ses0: SAF-TE Compliant Device
ses1 at amr0 bus 1 target 6 lun 0
ses1: <PE/PV 1x4 SCSI BP 1.0> Fixed Processor SCSI-2 device=20
ses1: SAF-TE Compliant Device
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
SMP: AP CPU #3 Launched!
Mounting root from ufs:/dev/amrd0s1a
-----------------------------------------------
--T. Muthu Mohan
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?71F713C5E3CB7F4F9ACCBBB8E9BE318A1E1DD2>