Date: Sat, 2 Jul 2005 02:11:23 -0400 From: Dominic Caffey <domcaf@gmail.com> To: "Mark A-J. Raught (from the laptop)" <mraught@acm.org> Cc: wpaul@freebsd.org, freebsd-mobile@freebsd.org Subject: Re: Problems building wireless ndis kernel module for D-Link DWL-650 V.P1 under FreeBSD v 5.4... for Intel...IBM ThinkPad 380z...help?... Message-ID: <71dda9b7050701231115f7477d@mail.gmail.com> In-Reply-To: <42C5D2A9.7080807@acm.org> References: <71dda9b705070112365c416696@mail.gmail.com> <42C5D2A9.7080807@acm.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Mark,
Thanks for the suggestion. I tried it but unfortunately it
did NOT work. I did indeed find another pair of inf & sys files in the
top level of the DLINK zip file and they had different contents then
what was in the WinXP folder as verified by doing a diff on the inf
file and chksum on the sys files. I also tried the inf & sys files
from the working Win2K installation on the same hardware and also was
unsuccessful. In all cases, I still got the same error from ndiscvt.
The directions in the FreeBSD online handbook state that one should
use the Win-XP files, which I originally did, but does one absolutely
have to use the Win-XP files or should the Win2k files work as well?
Hopefully someone can provide some clarification on this. I also
examined my inf files and they didn't have any control-chars-crap in
them; all inf versions appeared to be clean. Hopefully someone else
can shed some light on my problem. Thanks again for your suggestion.
Dom
On 7/1/05, Mark A-J. Raught (from the laptop) <mraught@acm.org> wrote:
> Dominic Caffey wrote:
> > Dear FreeBSD-Mobile & Newbies & Bill Paul,
> >
> > I'm having problems bulding a wireless ndis kernel module and
> > was hoping I might get some help with where I'm going wrong. Please be
> > aware that I did check the list archives at
> > http://lists.freebsd.org/mailman/mmsearch/freebsd-mobile before
> > posting but got no hits. I also tried google'ing the error message as
> > well with no hits so please no RTFM replies because I've already
> > RTFM'd at http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/net=
work-wireless.html
> > section 25.3.3.6.3 802.11a & 802.11g Clients. Here's the pertinet
> > information:
> >
> > uname -a output:
> > FreeBSD 380Z.none2.org 5.4-RELEASE FreeBSD 5.4-RELEASE #0: Sun May 8
> > 10:21:06 UTC 2005
> > root@harlow.cse.buffalo.edu:/usr/obj/usr/src/sys/GENERIC i386
> >
> > pwd output:
> > /usr/src/sys/modules/if_ndis
> >
> > ls -l output:
> > total 1342
> > -rw-r--r-- 1 root wheel 280 Mar 30 23:27 Makefile
> > -rw-r--r-- 1 root wheel 14391 Jun 29 17:35 NETPRISM.inf
> > -rw-r--r-- 1 root wheel 652288 Jun 29 17:35 PRISMNDS.sys
> > -rw-r--r-- 1 root wheel 644608 Jun 29 17:35 PRISMUSB.sys
> > -rw-r--r-- 1 root wheel 72 Jun 29 17:54 ndis_driver_data.h
> > -rw-r--r-- 1 root wheel 8276 Jun 29 17:35 prismnic.cat
> >
> > ndiscvt output:
> > ndiscvt -i NETPRISM.inf -s PRISMNDS.sys -o ndis_driver_data.h
> > ndiscvt: line 376: : syntax error.
> >
> > I obtained the Win-XP drivers for the wireless NIC, D-Link DWL-650
> > V.P1, from http://support.dlink.com/products/view.asp?productid=3DDWL%2=
D650%5FrevP
> >
> > I'm trying to do this on an IBM ThinkPad 380z with 64Mb ram with a 8Gb
> > hard drive.
> >
> > The wireless NIC works fine under MS-Win2k.
> >
> > Thanks,
> >
> > Dom
> >
>=20
> Dom,
> I had a similar error. I don't remember the exact error, but it was a
> syntax error and was due to the fact that I was using the wrong inf
> file. The correct one was pure ascii while the wrong one had
> miscellaneous crap in it. This may not be your problem, but it took me a
> while searching, until I gave up and went back to it and discovered that
> there were 2 inf files. Tried it with the other inf and all went well. I
> don't know if this is two different version of the same inf, or if it is
> an inf for a different system... Either way, you may want to check it
> out. I think my error was early in the file like line 6 or 8 though, so
> this may not help at all.
>=20
>=20
> -mark
>=20
--=20
+------------------------------------------------------
| Dominic Caffey
| Email: DomCaf@gmail.com
+------------------------------------------------------
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?71dda9b7050701231115f7477d>