Date: Mon, 23 Jun 2008 15:18:20 -0400 From: "Josh Carroll" <josh.carroll@gmail.com> To: hartzell@alerce.com Cc: freebsd-questions@freebsd.org Subject: Re: CPU temp's on core 2 duo, should they be significantly different? Message-ID: <8cb6106e0806231218jcbdffa8jec894b7fb31290c4@mail.gmail.com> In-Reply-To: <18527.62508.451095.415706@almost.alerce.com> References: <18527.62508.451095.415706@almost.alerce.com>
next in thread | previous in thread | raw e-mail | index | archive | help
> I've noticed that cpu.0 is consistently hotter than cpu.1, even on an > unloaded machine. Is that because that core's doing housekeeping work > whilst the other is truly idle? > > dev.cpu.0.temperature: 44 > dev.cpu.1.temperature: 29 I notice some differences on my quad-core (Q6600) CPU, too: dev.cpu.0.temperature: 35 dev.cpu.1.temperature: 34 dev.cpu.2.temperature: 27 dev.cpu.3.temperature: 30 The differences also stay around the same when I yes > /dev/null 4 times to load up each core: dev.cpu.0.temperature: 47 dev.cpu.1.temperature: 45 dev.cpu.2.temperature: 38 dev.cpu.3.temperature: 42 The discrepancy isn't as much as in your case, though. 15 C is pretty significant. It could be that either your heat spreader or heat sink are concave or convex causing one of the cores to get hotter. On my dual-core box, here are the idle temps: dev.cpu.0.temperature: 33 dev.cpu.1.temperature: 31 and under load: dev.cpu.0.temperature: 48 dev.cpu.1.temperature: 46 I'd recommend taking the heat sink off and seeing how the thermal grease is spread on the CPU's head spreader and on the heatsink itself. If it looks lopsided or extremely thick on one side of the CPU package or extremely thin (to the point where you can still see the sheen of the heatsink or heat spreader), then re-mount the heatsink and try to make sure it's evenly distributing the pressure down on the CPU package. Josh
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?8cb6106e0806231218jcbdffa8jec894b7fb31290c4>