Date: Tue, 12 May 1998 12:00:02 -0500 From: Raul Zighelboim <rzig@verio.net> To: "'Justin T. Gibbs'" <gibbs@narnia.plutotech.com> Cc: scsi@FreeBSD.ORG Subject: RE: DPT driver on 2.2-releng broken Message-ID: <A03CD00C69B1D01195AB00A024ECEB168AE14E@kaori.communique.net>
next in thread | raw e-mail | index | archive | help
Thanks; those are the questions I needed ;-) I saved the broken kernel, so... The kernel will compile and install clean. at reboot, it would detect the DPT controller, but would not detect the RAID array. At this point (looking for devices) it will display something similar to: (dpt0:0:0): "UNKNOWN UNKNOWN" type 0 fixed SCSI 2 for every device on the conencted to the controller. ================================================== Raul Zighelboim rzig@verio.net > -----Original Message----- > From: Justin T. Gibbs [SMTP:gibbs@narnia.plutotech.com] > Sent: Tuesday, May 12, 1998 10:31 AM > To: Raul Zighelboim > Cc: scsi@FreeBSD.org > Subject: Re: DPT driver on 2.2-releng broken > > In article > <A03CD00C69B1D01195AB00A024ECEB168AE14A@kaori.communique.net> you > wrote: > > > > Hello there; > > > > I cvsup-ed from 2.2.6-RELEASE to 2.2-stable.... > > Before CVSUP-ing, DPT controller was working and stable. After > > new kernel would not load. > > Would not build? Would not detect the DPT? Would not detect any > disk devices? You're being pretty vague here, so it's hard to know > which questions to ask. > > > Let me know what else will be needed to track the problem. > > You're being pretty vague here, so it's hard to know which questions > to ask. My first guess would be that the kernel would not build > because > you did not rebuild config and reconfig your kernel. > > > Raul Zighelboim rzig@verio.net > > -- > Justin To Unsubscribe: send mail to majordomo@FreeBSD.org with "unsubscribe freebsd-scsi" in the body of the message
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?A03CD00C69B1D01195AB00A024ECEB168AE14E>