Date: Tue, 24 May 2011 22:54:41 +0200 From: Dalibor Gudzic <dalibor.gudzic@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: freebsd-wireless@freebsd.org Subject: Re: kern/140796: [ath] [panic] Cannot attach (unable to attach hardware; HAL status 3) under 8, panic in 7.x Message-ID: <BANLkTinrFnDGwSCjyRc0WTXbNXkU1-isjQ@mail.gmail.com> In-Reply-To: <BANLkTi==UJNKhFYq5rmDZWv=sSG0UutkvQ@mail.gmail.com> References: <201105241220.p4OCKEZc074668@freefall.freebsd.org> <BANLkTi==UJNKhFYq5rmDZWv=sSG0UutkvQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hi Adrian, On Tue, May 24, 2011 at 2:29 PM, Adrian Chadd <adrian@freebsd.org> wrote: > On 24 May 2011 20:20, Dalibor Gudzic <dalibor.gudzic@gmail.com> wrote: > snipped > > Have you tried freebsd-current? I've done quite a bit of work with the > ath driver in FreeBSD-current. > No, but I will start downloading it now and give it a try. > Please make sure you're compiling with: > > options =A0 =A0 =A0 =A0 ATH_DEBUG > options =A0 =A0 =A0 =A0 ATH_DIAGAPI > options =A0 =A0 =A0 =A0 AH_DEBUG > device =A0 =A0 =A0 =A0 =A0ath_hal > option =A0 =A0 =A0 =A0 =A0AH_SUPPORT_AR5416 > > and see if that works. If not, reboot with the sysctl > hw.ath.hal.debug=3D0xffffffff set in /boot/loader.conf appropriately, so > I can hopefully get some debugging as to why the hardware isn't waking > up as expected. > > Thanks, > I will try with these, thanx (I'm not on FreeBSD box now). One more thing, should I post replies here or on kern/116444? Also, would you be interested in verbose dmesg from 8.2-RELEASE? Thanx for taking time for this. All best Dalibor
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BANLkTinrFnDGwSCjyRc0WTXbNXkU1-isjQ>