Date: Sun, 13 Apr 2008 10:32:03 +0800 From: paul pang <gpmusketeer@hotmail.com> To: <freebsd-drivers@freebsd.org> Subject: wpi make error* Message-ID: <BAY109-W24FE5E16672E916EEC183FBBE90@phx.gbl>
next in thread | raw e-mail | index | archive | help
I have 20071102-freebsd-wpi.tar.gz install successfully but this is the i=
fconfig message
wpi0: flags=3D8803<UP,BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
ether 00:13:02:bf:92:f8
media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
status: no carrier
ssid "" channel 1 (2412 Mhz 11b)
authmode OPEN privacy OFF txpower 50 bmiss 7 scanvalid 60 bintval 0
Note that: no carrier.
and dmesg stated
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xd8000000-0xd8000fff irq 17 at d=
evice 0.0 on pci3
bus_dmamem_alloc failed to align memory properly.
................
bus_dmamem_alloc failed to align memory properly.
wpi0: Ethernet address: 00:13:02:bf:92:f8
wpi0: [ITHREAD]
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp=
s 36Mbps 48Mbps 54Mbps
wpifw: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/=
.
wpifw: If you agree with the license, set legal.intel_wpi.license_ack=3D1 i=
n /boot/loader.conf.
module_register_init: MOD_LOAD (wpifw_fw, 0xc4f6d520, 0) error 1
firmware_get: failed to load firmware image wpifw
wpi0: could not load firmware image 'wpifw'
wpi0: A problem occurred loading the firmware to the driver
ukbd0: at uhub2 port 1 (addr 2) disconnected
ukbd0: detached
uhid0: at uhub2 port 1 (addr 2) disconnected
uhid0: detached
ukbd0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on uhub2
kbd2 at ukbd0
uhid0: <CHESEN USB Keyboard, class 0/0, rev 1.10/1.10, addr 2> on uhub2
wpi0: detached
wpi0: <Intel(R) PRO/Wireless 3945ABG> mem 0xd8000000-0xd8000fff irq 17 at d=
evice 0.0 on pci3
wpi0: Driver Revision 20071102
wpi0: Hardware Revision (0x801)
bus_dmamem_alloc failed to align memory properly.
.................................
bus_dmamem_alloc failed to align memory properly.
adding chan 1 flags=3D0x2b maxpwr=3D15, offset 2
adding chan 2 flags=3D0x2b maxpwr=3D15, offset 4
adding chan 3 flags=3D0x2b maxpwr=3D15, offset 6
adding chan 4 flags=3D0x2b maxpwr=3D15, offset 8
adding chan 5 flags=3D0x2b maxpwr=3D15, offset 10
adding chan 6 flags=3D0x2b maxpwr=3D15, offset 12
adding chan 7 flags=3D0x2b maxpwr=3D15, offset 14
adding chan 8 flags=3D0x2b maxpwr=3D15, offset 16
adding chan 9 flags=3D0x2b maxpwr=3D15, offset 18
adding chan 10 flags=3D0x2b maxpwr=3D15, offset 20
adding chan 11 flags=3D0x2b maxpwr=3D14, offset 22
adding chan 36 flags=3D0xa1 maxpwr=3D14, offset 23
adding chan 40 flags=3D0xa1 maxpwr=3D14, offset 24
adding chan 44 flags=3D0xa1 maxpwr=3D14, offset 25
adding chan 48 flags=3D0xa1 maxpwr=3D14, offset 26
adding chan 52 flags=3D0xb1 maxpwr=3D14, offset 27
adding chan 56 flags=3D0xb1 maxpwr=3D14, offset 28
adding chan 60 flags=3D0xb1 maxpwr=3D14, offset 29
adding chan 64 flags=3D0xb1 maxpwr=3D14, offset 30
adding chan 149 flags=3D0x21 maxpwr=3D16, offset 31
adding chan 153 flags=3D0x21 maxpwr=3D16, offset 32
adding chan 157 flags=3D0x21 maxpwr=3D16, offset 33
adding chan 161 flags=3D0x21 maxpwr=3D16, offset 34
adding chan 165 flags=3D0x21 maxpwr=3D16, offset 35
power group 0: chan=3D1 maxpwr=3D47 temp=3D-187
sample 0: index=3D13 power=3D43
sample 1: index=3D29 power=3D30
sample 2: index=3D47 power=3D10
sample 3: index=3D58 power=3D-1
sample 4: index=3D77 power=3D-19
power group 1: chan=3D44 maxpwr=3D51 temp=3D-191
sample 0: index=3D12 power=3D42
sample 1: index=3D19 power=3D35
sample 2: index=3D32 power=3D21
sample 3: index=3D43 power=3D11
sample 4: index=3D77 power=3D-22
power group 2: chan=3D64 maxpwr=3D51 temp=3D-189
sample 0: index=3D12 power=3D43
sample 1: index=3D20 power=3D35
sample 2: index=3D33 power=3D22
sample 3: index=3D44 power=3D13
sample 4: index=3D77 power=3D-18
power group 3: chan=3D116 maxpwr=3D48 temp=3D-188
sample 0: index=3D12 power=3D36
sample 1: index=3D20 power=3D27
sample 2: index=3D36 power=3D11
sample 3: index=3D48 power=3D0
sample 4: index=3D77 power=3D-27
power group 4: chan=3D153 maxpwr=3D48 temp=3D-186
sample 0: index=3D10 power=3D35
sample 1: index=3D20 power=3D23
sample 2: index=3D32 power=3D11
sample 3: index=3D42 power=3D3
sample 4: index=3D77 power=3D-28
wpi0: Regulatory Domain: MoW1
wpi0: Hardware Type: B
wpi0: Hardware Revision: ?
wpi0: SKU does support 802.11a
wpi0: Ethernet address: 00:13:02:bf:92:f8
wpi0: [ITHREAD]
wpi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
wpi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wpi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbp=
s 36Mbps 48Mbps 54Mbps
wpi0: timeout resetting Tx ring 1
wpi0: timeout resetting Tx ring 3
wpi0: timeout resetting Tx ring 4
NEWSTATE:INIT
firmware_get: failed to load firmware image wpifw
wpi0: could not load firmware image 'wpifw'
wpi0: A problem occurred loading the firmware to the driver
NEWSTATE:INIT
firmware_get: failed to load firmware image wpifw
wpi0: could not load firmware image 'wpifw'
wpi0: A problem occurred loading the firmware to the driver
While i have this in my loader.conf=20
if_ath_load["YES"
if_wpi_load=3D"YES"
wlan_load=3D"YES"
wlan_wep_load=3D"YES"
wlan_ccmp_load=3D"YES"
wlan_tkip_load=3D"YES"
legal.intel_wpi.license_ack=3D1
wpifw_load=3D"YES"
but why it still ask me to set the license?
_________________________________________________________________
Help Splitzo Sally Before It=92s Too Late!=20
http://www.thegirlwhosplitinto5.com/=
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?BAY109-W24FE5E16672E916EEC183FBBE90>