Date: Tue, 17 Dec 2019 11:47:14 +0800 From: ykla <yklaxds@gmail.com> To: Kyle Evans <kevans@freebsd.org> Cc: "freebsd-arm@freebsd.org" <freebsd-arm@freebsd.org> Subject: Re: How to boot freebsd on rpi4b? Message-ID: <CA%2BPGaYBNRB6wHKWzBkGAB_KcJ68MwiumaXh%2B1f2s44jXsmKRRQ@mail.gmail.com> In-Reply-To: <CA%2BPGaYDLDMwchHtm%2Be9X2SyQJu0hTmJrb6gE7ipZpS7WAj2SZQ@mail.gmail.com> References: <CA%2BPGaYB4_ef2xgdNv=0ZfHJXFOHTt4UgCgM02cZi1s5vo%2BaVXw@mail.gmail.com> <CACNAnaG7EMDX06_iuhNzKq=RgM8ZvzSrYApmKSMQN7VjkLGgmg@mail.gmail.com> <CA%2BPGaYDaUp2nQhN%2BtE23Wxa04sM2EZ7CeNkseRjWs2zUgzyK-g@mail.gmail.com> <CA%2BPGaYCwhVZ792hNLXrO-knReHC-85wXk5wrNzconOYWSGsJ0A@mail.gmail.com> <CACNAnaEAcZxVjWuOFW5fbKNoPM1Sste1%2BWj7=uiy8Nx3dSzh5A@mail.gmail.com> <CA%2BPGaYDLDMwchHtm%2Be9X2SyQJu0hTmJrb6gE7ipZpS7WAj2SZQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
PL2303 TTL to USB can only output and I can't input anything. Any input are garbled. [image: 1217114605.png] ykla <yklaxds@gmail.com> =E4=BA=8E2019=E5=B9=B412=E6=9C=8817=E6=97=A5=E5=91= =A8=E4=BA=8C =E4=B8=8A=E5=8D=8811:13=E5=86=99=E9=81=93=EF=BC=9A > I reboot for 10 times and now show me root login, but usually stops on lo= 0. > Here's log: > > Connecting to COM10... > Connected. > > MMC: emmc2@7e340000: 0, mmc@7e300000: 1 > Loading Environment from FAT... In: serial > Out: vidconsole > Err: vidconsole > Net: Net Initialization Skipped > No ethernet found. > Hit any key to stop autoboot: 0 > switch to partitions #0, OK > mmc0 is current device > Scanning mmc 0:1... > Found EFI removable media binary efi/boot/bootaa64.efi > libfdt fdt_check_header(): FDT_ERR_BADMAGIC > Scanning disk emmc2@7e340000.blk... > Scanning disk mmc@7e300000.blk... > Disk mmc@7e300000.blk not ready > Found 3 disks > BootOrder not defined > EFI boot manager: Cannot load any image > 677944 bytes read in 77 ms (8.4 MiB/s) > libfdt fdt_check_header(): FDT_ERR_BADMAGIC > Consoles: EFI console > Reading loader env vars from /efi/freebsd/loader.env > Setting currdev to disk0p1: > FreeBSD/arm64 EFI loader, Revision 1.1 > (Thu Dec 12 06:37:06 UTC 2019 root@releng1.nyi.freebsd.org) > > Command line arguments: loader.efi > Image base: 0x39ea3000 > EFI version: 2.80 > EFI Firmware: Das U-Boot (rev 8217.4096) > Console: efi (0x1000) > Load Path: /efi\boot\bootaa64.efi > Load Device: > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xf6fc5= 2af,0x81f,0x18fa8) > Trying ESP: > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(1,MBR,0xf6fc5= 2af,0x81f,0x18fa8) > Setting currdev to disk0p1: > Trying: > /VenHw(e61d73b9-a384-4acc-aeab-82e828f3628b)/SD(0)/SD(0)/HD(2,MBR,0xf6fc5= 2af,0x197c7,0xeb68839) > Setting currdev to disk0p2: > Loading /boot/defaults/loader.conf > Loading /boot/device.hints > Loading /boot/loader.conf > Loading /boot/loader.conf.local > Loading kernel... > /boot/kernel/kernel text=3D0x9785cc data=3D0x18f538 data=3D0x0+0x79b9e0 > syms=3D[0x8+0x1441e0+0x8+0x12ebce] > Loading configured modules... > /boot/kernel/umodem.ko text=3D0x2100 text=3D0x13a0 data=3D0x6e0+0x10 > syms=3D[0x8+0xf48+0x8+0xb6e] > /boot/entropy size=3D0x1000 > > Hit [Enter] to boot immediately, or any other key for command prompt. > Booting [/boot/kernel/kernel]... > Using DTB provided by EFI at 0x7ef2000. > EFI framebuffer information: > addr, size 0x3eab2000, 0x148000 > dimensions 656 x 512 > stride 656 > masks 0x00ff0000, 0x0000ff00, 0x000000ff, 0xff000000 > ---<<BOOT>>--- > KDB: debugger backends: ddb > KDB: current backend: ddb > Copyright (c) 1992-2019 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 13.0-CURRENT #0 r355634: Thu Dec 12 07:51:26 UTC 2019 > root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm64.aarch64/sys/GENER= IC > arm64 > FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLV= M > 9.0.0) > WARNING: WITNESS option enabled, expect reduced performance. > VT(efifb): resolution 656x512 > module firmware already present! > KLD file umodem.ko is missing dependencies > Starting CPU 1 (1) > Starting CPU 2 (2) > Starting CPU 3 (3) > FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs > random: unblocking device. > random: entropy device external interface > MAP 39f53000 mode 2 pages 1 > MAP 39f57000 mode 2 pages 1 > MAP 3b360000 mode 2 pages 16 > MAP fe100000 mode 0 pages 1 > WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD > 13.0. > kbd0 at kbdmux0 > WARNING: Device "openfirm" is Giant locked and may be deleted before > FreeBSD 13.0. > ofwbus0: <Open Firmware Device Tree> > simplebus0: <Flattened device tree simple bus> on ofwbus0 > ofw_clkbus0: <OFW clocks bus> on ofwbus0 > clk_fixed0: <Fixed clock> on ofw_clkbus0 > clk_fixed1: <Fixed clock> on ofw_clkbus0 > simplebus1: <Flattened device tree simple bus> on ofwbus0 > simplebus2: <Flattened device tree simple bus> on ofwbus0 > regfix0: <Fixed Regulator> on ofwbus0 > regfix1: <Fixed Regulator> on ofwbus0 > psci0: <ARM Power State Co-ordination Interface Driver> on ofwbus0 > gic0: <ARM Generic Interrupt Controller> mem > 0x40041000-0x40041fff,0x40042000-0x40043fff,0x40044000-0x40045fff,0x40046= 000-0x40047fff > irq 46 on simplebus0 > gic0: pn 0x2, arch 0x2, rev 0x1, implementer 0x43b irqs 256 > gpio0: <BCM2708/2835 GPIO controller> mem 0x7e200000-0x7e2000b3 irq 22,23 > on simplebus0 > gpiobus0: <OFW GPIO bus> on gpio0 > gpioregulator0: <GPIO controlled regulator> on ofwbus0 > gpioregulator0: cannot get pin 0 > gpioregulator0: cannot parse parameters > device_attach: gpioregulator0 attach returned 6 > generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0 > Timecounter "ARM MPCore Timecounter" frequency 54000000 Hz quality 1000 > Event timer "ARM MPCore Eventtimer" frequency 54000000 Hz quality 1000 > gpioregulator0: <GPIO controlled regulator> on ofwbus0 > gpioregulator0: cannot get pin 0 > gpioregulator0: cannot parse parameters > device_attach: gpioregulator0 attach returned 6 > gpioregulator0: <GPIO controlled regulator> on ofwbus0 > gpioregulator0: cannot get pin 0 > gpioregulator0: cannot parse parameters > device_attach: gpioregulator0 attach returned 6 > gpioregulator0: <GPIO controlled regulator> on ofwbus0 > gpioregulator0: cannot get pin 0 > gpioregulator0: cannot parse parameters > device_attach: gpioregulator0 attach returned 6 > gpioregulator0: <GPIO controlled regulator> on ofwbus0 > gpioregulator0: cannot get pin 0 > gpioregulator0: cannot parse parameters > device_attach: gpioregulator0 attach returned 6 > usb_nop_xceiv0: <USB NOP PHY> on ofwbus0 > gpioregulator0: <GPIO controlled regulator> on ofwbus0 > gpioregulator0: cannot get pin 0 > gpioregulator0: cannot parse parameters > device_attach: gpioregulator0 attach returned 6 > bcm_dma0: <BCM2835 DMA Controller> mem 0x7e007000-0x7e007aff irq > 9,10,11,12,13,14,15,16,17,18,19 on simplebus0 > Checking root against brcm,bcm2837 > Checking root against brcm,bcm2711 > bcmwd0: <BCM2708/2835 Watchdog> mem > 0x7e100000-0x7e100113,0x7e00a000-0x7e00a023,0x7ec11000-0x7ec1101f on > simplebus0 > mbox0: <BCM2835 VideoCore Mailbox> mem 0x7e00b880-0x7e00b8bf irq 21 on > simplebus0 > gpioc0: <GPIO controller> on gpio0 > uart0: <PrimeCell UART (PL011)> mem 0x7e201000-0x7e2011ff irq 24 on > simplebus0 > uart0: console (115200,n,8,1) > sdhci_bcm0: <Broadcom 2708 SDHCI controller> mem 0x7e340000-0x7e3400ff ir= q > 60 on simplebus0 > mmc0: <MMC/SD bus> on sdhci_bcm0 > sdhci_bcm1: <Broadcom 2708 SDHCI controller> mem 0x7e300000-0x7e3000ff ir= q > 61 on simplebus0 > mmc1: <MMC/SD bus> on sdhci_bcm1 > fb0: <BCM2835 VT framebuffer driver> on simplebus0 > fb0: keeping existing fb bpp of 32 > fbd0 on fb0 > WARNING: Device "fb" is Giant locked and may be deleted before FreeBSD > 13.0. > VT: Replacing driver "efifb" with new "fb". > fb0: 656x512(656x512@0,0) 32bpp > fb0: fbswap: 1, pitch 2624, base 0x3eab2000, screen_size 1343488 > cpulist0: <Open Firmware CPU Group> on ofwbus0 > cpu0: <Open Firmware CPU> on cpulist0 > cpu1: <Open Firmware CPU> on cpulist0 > cpu2: <Open Firmware CPU> on cpulist0 > cpu3: <Open Firmware CPU> on cpulist0 > gpioled0: <GPIO LEDs> on ofwbus0 > gpioled0: <led1> failed to map pin > gpioregulator0: <GPIO controlled regulator> on ofwbus0 > gpioregulator0: cannot get pin 0 > gpioregulator0: cannot parse parameters > device_attach: gpioregulator0 attach returned 6 > cryptosoft0: <software crypto> > Timecounters tick every 1.000 msec > usb_needs_explore_all: no devclass > mmcsd0: 126GB <SDHC AcMKS 0.2 SN 40400CB7 MFG 06/2019 by 156 SO> at mmc0 > 50.0MHz/4bit/65535-block > sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no activ= e > command. > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 > sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 > sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 > sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb > sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 > sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 > sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 > sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no activ= e > command. > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 > sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 > sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 > sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb > sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 > sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 > sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 > sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no activ= e > command. > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_bcm1-slot0: Argument: 0x000001aa | Trn mode: 0x00000000 > sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 > sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 > sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb > sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 > sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 > sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 > sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no activ= e > command. > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 > sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 > sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 > sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb > sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 > sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 > sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 > sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no activ= e > command. > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 > sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 > sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 > sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb > sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 > sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 > sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 > sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no activ= e > command. > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 > sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 > sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 > sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb > sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 > sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 > sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 > sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Got command interrupt 0x00030000, but there is no activ= e > command. > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D REGISTER DUM= P =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > sdhci_bcm1-slot0: Sys addr: 0x00000000 | Version: 0x00009902 > sdhci_bcm1-slot0: Blk size: 0x00000000 | Blk cnt: 0x00000000 > sdhci_bcm1-slot0: Argument: 0x00000000 | Trn mode: 0x00000000 > sdhci_bcm1-slot0: Present: 0x000f0000 | Host ctl: 0x00000001 > sdhci_bcm1-slot0: Power: 0x0000000f | Blk gap: 0x00000000 > sdhci_bcm1-slot0: Wake-up: 0x00000000 | Clock: 0x0000fa07 > sdhci_bcm1-slot0: Timeout: 0x00000000 | Int stat: 0x00000000 > sdhci_bcm1-slot0: Int enab: 0x01ff00bb | Sig enab: 0x01ff00bb > sdhci_bcm1-slot0: AC12 err: 0x00000000 | Host ctl2:0x00000000 > sdhci_bcm1-slot0: Caps: 0x00000000 | Caps2: 0x00000000 > sdhci_bcm1-slot0: Max curr: 0x00000001 | ADMA err: 0x00000000 > sdhci_bcm1-slot0: ADMA addr:0x00000000 | Slot int: 0x00000000 > sdhci_bcm1-slot0: =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D > mmc1: No compatible cards found on bus > Release APs...done > CPU 0: ARM Cortex-A72 r0p3 affinity: 0 > Instruction Set Attributes 0 =3D <CRC32> > Trying to mount root from ufs:/dev/ufs/rootfs [rw]... > Instruction Set Attributes 1 =3D <> > Processor Features 0 =3D <AdvSIMD,FP,EL3 32,EL2 32,EL1 32,EL0 32= > > Processor Features 1 =3D <> > Memory Model Features 0 =3D <TGran4,TGran64,SNSMem,BigEnd,16bit > ASID,16TB PA> > Memory Model Features 1 =3D <8bit VMID> > Memory Model Features 2 =3D <32bit CCIDX,48bit VA> > Debug Features 0 =3D <2 CTX BKPTs,4 Watchpoints,6 > Breakpoints,PMUv3,Debugv8> > Debug Features 1 =3D <> > Auxiliary Features 0 =3D <> > Auxiliary Features 1 =3D <> > CPU 1: ARM Cortex-A72 r0p3 affinity: 1 > CPU 2: ARM Cortex-A72 r0p3 affinity: 2 > CPU 3: ARM Cortex-A72 r0p3 affinity: 3 > WARNING: WITNESS option enabled, expect reduced performance. > WARNING: was not properly dismounted > Warning: no time-of-day clock registered, system time will not be set > accurately > Setting hostuuid: 30303031-3030-3030-3165-653364373161. > Setting hostid: 0x3c744718. > No suitable dump device was found. > Starting file system checks: > /dev/ufs/rootfs: INCORRECT BLOCK COUNT I=3D4470 (8 should be 0) (CORRECTE= D) > /dev/ufs/rootfs: LINK COUNT DIR I=3D11 OWNER=3Droot MODE=3D40755 > /dev/ufs/rootfs: SIZE=3D512 MTIME=3DDec 12 09:12 2019 COUNT 25 SHOULD BE= 24 > (ADJUSTED) > /dev/ufs/rootfs: UNREF FILE I=3D4466 OWNER=3Droot MODE=3D100644 > /dev/ufs/rootfs: SIZE=3D0 MTIME=3DDec 12 09:12 2019 > (CLEARED) > /dev/ufs/rootfs: UNREF FILE I=3D4469 OWNER=3Droot MODE=3D100644 > /dev/ufs/rootfs: SIZE=3D0 MTIME=3DDec 12 09:12 2019 > (CLEARED) > /dev/ufs/rootfs: UNREF FILE I=3D4470 OWNER=3Droot MODE=3D100444 > /dev/ufs/rootfs: SIZE=3D0 MTIME=3DDec 12 09:12 2019 > (CLEARED) > /dev/ufs/rootfs: UNREF FILE I=3D4501 OWNER=3Droot MODE=3D100600 > /dev/ufs/rootfs: SIZE=3D4096 MTIME=3DDec 12 09:11 2019 > (CLEARED) > /dev/ufs/rootfs: SUMMARY INFORMATION BAD (SALVAGED) > /dev/ufs/rootfs: BLK(S) MISSING IN BIT MAPS (SALVAGED) > /dev/ufs/rootfs: 23639 files, 705985 used, 29178238 free (302 frags, > 3647242 blocks, 0.0% fragmentation) > Mounting local filesystems:. > ELF ldconfig path: /lib /usr/lib /usr/lib/compat > Setting hostname: generic. > Setting up harvesting: > [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,= ATTACH,CACHED > Feeding entropy: . > lo0: link state changed to UP > Starting Network: lo0. > lo0: flags=3D8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 > options=3D680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> > inet6 ::1 prefixlen 128 > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > inet 127.0.0.1 netmask 0xff000000 > groups: lo > nd6 options=3D21<PERFORMNUD,AUTO_LINKLOCAL> > Starting devd. > add host 127.0.0.1: gateway lo0 fib 0: route already in table > add host ::1: gateway lo0 fib 0: route already in table > add net fe80::: gateway ::1 > add net ff02::: gateway ::1 > add net ::ffff:0.0.0.0: gateway ::1 > add net ::0.0.0.0: gateway ::1 > Creating and/or trimming log files. > Starting syslogd. > Clearing /tmp (X related). > Updating motd:. > Mounting late filesystems:. > Updating /var/run/os-release done. > Configuring vt: blanktime. > Performing sanity check on sshd configuration. > Starting sshd. > Starting cron. > Starting background file system checks in 60 seconds. > > Thu Dec 12 09:13:14 UTC 2019 > > FreeBSD/arm64 (generic) (ttyu0) > > login: > > Kyle Evans <kevans@freebsd.org> =E4=BA=8E2019=E5=B9=B412=E6=9C=8817=E6=97= =A5=E5=91=A8=E4=BA=8C =E4=B8=8A=E5=8D=8810:33=E5=86=99=E9=81=93=EF=BC=9A > >> On Mon, Dec 16, 2019 at 8:30 PM ykla <yklaxds@gmail.com> wrote: >> > ykla <yklaxds@gmail.com> =E4=BA=8E 2019=E5=B9=B412=E6=9C=8817=E6=97=A5= =E5=91=A8=E4=BA=8C =E4=B8=8A=E5=8D=8810:27=E5=86=99=E9=81=93=EF=BC=9A >> >> Kyle Evans <kevans@freebsd.org> =E4=BA=8E 2019=E5=B9=B412=E6=9C=8817= =E6=97=A5=E5=91=A8=E4=BA=8C =E4=B8=8A=E5=8D=8810:04=E5=86=99=E9=81=93=EF=BC= =9A >> >>> >> >>> On Mon, Dec 16, 2019 at 7:50 PM ykla <yklaxds@gmail.com> wrote: >> >>> > >> >>> > Hi, I download latest version 12.12 current 13 img and write in TF >> card. >> >>> > Then I download rpi-firmware(2019-12-05 16:15:16) and extract and >> copy it >> >>> > in BOOT partition. And look at my screen shows me that stop boot o= n >> lo0 >> >>> > state. I know it can't support USB/PCI/ethernet and I just want to >> install >> >>> > it. Thanks. >> >>> >> >>> That's a most curious failure mode... if you got to the point where >> >>> we're bringing up lo0, it should have either been fine or blown up >> >>> terribly in an obvious way -- I'll reimage tomorrow-ish based on the >> >>> latest snapshot and see if I can reproduce. >> >>> >> >>> In the meantime, can you post a transcript of the boot? >> >>> >> >>> Thanks, >> >>> >> >>> Kyle Evans >> >> >> >> New error: stopped at >> >> Warning: no time-of-day clock registered. system time will not be set >> accurately. >> > >> > I just reboot and bugs show: >> > lo0 :link state change to UP. >> > >> >> Can you scroll up to just above that sdhci output and take another >> picture? (above the =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D) >> >> Thanks, >> >> Kyle Evans >> >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BPGaYBNRB6wHKWzBkGAB_KcJ68MwiumaXh%2B1f2s44jXsmKRRQ>