Skip site navigation (1)Skip section navigation (2)
Date:      Mon, 29 Oct 2012 16:31:34 +0100
From:      Monthadar Al Jaberi <monthadar@gmail.com>
To:        Andriy Gapon <avg@freebsd.org>
Cc:        freebsd-current <freebsd-current@freebsd.org>, Ryan Stone <rysto32@gmail.com>
Subject:   Re: Dtrace: Module is no longer loaded
Message-ID:  <CA%2BsBSo%2Bxxf4YO4vx=nmrMh6FZV=mTbJ3o1JYHFnEjWbtCRSwCw@mail.gmail.com>
In-Reply-To: <508E98E1.7010502@FreeBSD.org>
References:  <CA%2BsBSoLWT=7dRC=BUo2tRXnvS%2BPuijWMP5%2BB=wD=jSGys37QBw@mail.gmail.com> <CAFMmRNyM_OUz6aAYWAhJKiFvZ0BVVnNvVT0cR_OmWJieXjU0yA@mail.gmail.com> <CA%2BsBSoKZszxXsaeieJu9BZ5SDKsB2YJ%2BrJiq7zDKpLAppm3DQA@mail.gmail.com> <508E98E1.7010502@FreeBSD.org>

next in thread | previous in thread | raw e-mail | index | archive | help
-g is included in the base file "AR71XX_BASE" which I have not changed.

The error message seems cryptic to me, which module it is talking
about that is not loaded?

Attaching base file:
#
# AR71XX -- Kernel configuration file for FreeBSD/MIPS for Atheros 71xx systems
#
# This includes all the common drivers for the AR71XX boards along with
# the usb, net80211 and atheros driver code.
#
# $FreeBSD$
#

machine		mips mips
ident		AR71XX_BASE
cpu		CPU_MIPS4KC
makeoptions	KERNLOADADDR=0x80050000
options		HZ=1000
options		HWPMC_HOOKS

files		"../atheros/files.ar71xx"

# For now, hints are per-board.

hints		"AR71XX_BASE.hints"

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

# Build these as modules so small platform builds will have the
# modules already built.
makeoptions	MODULES_OVERRIDE="random gpio ar71xx if_gif if_gre
if_bridge bridgestp usb wlan wlan_xauth wlan_acl wlan_wep wlan_tkip
wlan_ccmp wlan_rssadapt wlan_amrr ath ath_pci"

options		DDB
options		KDB

options		SCHED_4BSD		#4BSD scheduler
options		INET			#InterNETworking
options		INET6			# IPv6

# options		NFS_CL		#Network Filesystem Client

options		PSEUDOFS		#Pseudo-filesystem framework
options		_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions

# options		NFS_LEGACYRPC
# Debugging for use in -current
options		INVARIANTS
options		INVARIANT_SUPPORT
options		WITNESS
options		WITNESS_SKIPSPIN
options		DEBUG_REDZONE
options		DEBUG_MEMGUARD

options         FFS                     #Berkeley Fast Filesystem
# options         SOFTUPDATES             #Enable FFS soft updates support
# options         UFS_ACL                 #Support for access control lists
# options         UFS_DIRHASH             #Improve performance on big
directories
# options		MSDOSFS			# Read MSDOS filesystems; useful for USB/CF

device		pci
device		ar71xx_pci

# 802.11 framework
options		IEEE80211_DEBUG
options		IEEE80211_ALQ
options		IEEE80211_SUPPORT_MESH
# This option is currently broken for if_ath_tx.
options		IEEE80211_SUPPORT_TDMA
options		IEEE80211_AMPDU_AGE
device		wlan            # 802.11 support
device		wlan_wep        # 802.11 WEP support
device		wlan_ccmp       # 802.11 CCMP support
device		wlan_tkip       # 802.11 TKIP support
device		wlan_xauth	# 802.11 hostap support
device		wlan_acl	# 802.11 ACL support

# Atheros wireless NICs
device		ath             # Atheros interface support
device		ath_pci		# Atheros PCI/Cardbus bus
options 	ATH_DEBUG
options		ATH_DIAGAPI
options		ATH_ENABLE_11N
options		AH_DEBUG
options		AH_DEBUG_ALQ
options		ALQ
device		ath_hal
option		AH_SUPPORT_AR5416
device		ath_rate_sample
option		AH_RXCFG_SDMAMW_4BYTES
option		AH_AR5416_INTERRUPT_MITIGATION
# There's no DFS radar detection support yet so this won't actually
# detect radars.  It however does enable the rest of the channel change
# machinery so DFS can be debugged.
option		ATH_ENABLE_DFS

device		mii
device		arge

device		usb
options		USB_EHCI_BIG_ENDIAN_DESC        # handle big-endian byte order
options		USB_DEBUG
options		USB_HOST_ALIGN=32		# AR71XX (MIPS in general?) requires this
device		ehci

device		scbus
device		umass
device		da

# On-board SPI flash
device		spibus
device		ar71xx_spi
device		mx25l
device		ar71xx_wdog

device		uart

device		loop
device		ether
device		md
device		bpf
device		random
device		if_bridge
device		gif		# ip[46] in ip[46] tunneling protocol
device		gre		# generic encapsulation - only for IPv4 in IPv4 though atm

options		ARGE_DEBUG	# Enable if_arge debugging for now

# Enable GPIO
device		gpio
device		gpioled


On Mon, Oct 29, 2012 at 3:55 PM, Andriy Gapon <avg@freebsd.org> wrote:
> on 29/10/2012 16:40 Monthadar Al Jaberi said the following:
>> On Mon, Oct 29, 2012 at 2:10 PM, Ryan Stone <rysto32@gmail.com> wrote:
>>> You didn't build with WITH_CTF=1
>>
>> Yes I did, sorry forgot to attach kernel config.
>
> What about -g ?
> http://wiki.freebsd.org/DTrace
>
>> #
>> # Ubiquiti Routerstation Pro: boot from NFS
>> #
>> # $FreeBSD$
>> #
>>
>> include               "AR71XX_BASE"
>> ident         "RSPRO_NFS"
>> hints         "RSPRO.hints"
>>
>> makeoptions   MODULES_OVERRIDE+="opensolaris dtrace cyclic
>> dtrace/dtnfsclient dtrace/dtnfscl dtrace/lockstat dtrace/profile"
>> makeoptions WITH_CTF=1
>> options KDTRACE_HOOKS         # all architectures - enable general DTrace hooks
>> options DDB_CTF                       # all architectures - kernel ELF linker loads CTF data
>> #options      NFSCL                   #Network Filesystem Client
>>
>>
>> # RTC - requires hackery in the spibus code to work
>> device                pcf2123_rtc
>>
>> # GEOM modules
>> device                geom_redboot    # to get access to the SPI flash partitions
>> device                geom_uzip       # compressed in-memory filesystem hackery!
>> options               GEOM_UZIP
>>
>> # Boot from NFS
>> options               NFSLOCKD                #Network Lock Manager
>> options               NFSCLIENT               #Network Filesystem Client
>> options               NFS_ROOT
>>
>> options               BOOTP
>> options               BOOTP_NFSROOT
>> options               BOOTP_NFSV3
>> options               BOOTP_WIRED_TO=arge0
>> options               BOOTP_COMPAT
>> options               ROOTDEVNAME=\"nfs:172.16.1.101:/usr/obj/rspro/nfs\"
>>
>>
>
>
> --
> Andriy Gapon



-- 
Monthadar Al Jaberi



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CA%2BsBSo%2Bxxf4YO4vx=nmrMh6FZV=mTbJ3o1JYHFnEjWbtCRSwCw>