Date: Mon, 6 Jan 2014 16:19:13 +0800 From: Huang Wen Hui <huanghwh@gmail.com> To: Adrian Chadd <adrian@freebsd.org> Cc: Hans Petter Selasky <hps@bitfrost.no>, freebsd-current <freebsd-current@freebsd.org> Subject: Re: Install 10.0-RC3 on MacBookPro Late 2013 Message-ID: <CAB8uncbjhzG-9BYbYH6skhnf-O24hDeX644aEpz162C-FHWTFA@mail.gmail.com> In-Reply-To: <CAJ-Vmo=AxbQ9MMtkB_W3YW0s9QwmR8qWzgprOM_66MQqcgmdNQ@mail.gmail.com> References: <CAB8uncZO19Aen%2BuQRgO3whSOTVM%2BftcsGrJuGZZd4Qbd1Zf5mw@mail.gmail.com> <CAJ-Vmo=g-iVjNjygY93MVinptkA7HazJ3FRu1PsfKZtj-fubgg@mail.gmail.com> <CAB8unca6XZSEa8=c21yDJ=ueuUiW=D4v2PcLEzgt_sfTgsuzqA@mail.gmail.com> <CAB8unca8G32qcz67EaRdqrSBuO0YiBV4zL7fV3EfMozdeSsBQA@mail.gmail.com> <52CA56E5.8030101@bitfrost.no> <CAJ-Vmo=AxbQ9MMtkB_W3YW0s9QwmR8qWzgprOM_66MQqcgmdNQ@mail.gmail.com>
next in thread | previous in thread | raw e-mail | index | archive | help
The xhci code from 9.1R is OK, but there are a lot of "USB_ERR_TIMEOUT" in 9.2R... 2014/1/6 Adrian Chadd <adrian@freebsd.org> > .. are you getting this USB_ERR_TIMEOUT even with the xhci code from -9? > > > -a > > On 5 January 2014 23:10, Hans Petter Selasky <hps@bitfrost.no> wrote: > > On 01/06/14 05:11, Huang Wen Hui wrote: > >> > >> Hi, > >> > >> USB still have a lot of USB_ERR_TIMEOUT, but Internal keyboard and > >> external keyboard found and works! > >> usb disk also found, but booting stop at: > >> Mounting from ufs:/dev/da0a failed with error 6. > >> or a lot of cam Retrying command. > >> > >> Cheers, > >> Huang Wen Hui > > > > > > Hi, > > > > I think there is an IRQ problem. Either some IRQ is not handled or IRQ's > are > > not forwarded to the drivers properly. You might want to compile the XHCI > > debugging variable to 16 inside dev/usb/controller/xhci.c, and watch > what is > > going on. > > > > --HPS > > >
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAB8uncbjhzG-9BYbYH6skhnf-O24hDeX644aEpz162C-FHWTFA>