Skip site navigation (1)Skip section navigation (2)
Date:      Sun, 1 Oct 2017 20:17:32 +0200
From:      Tomasz CEDRO <tomek@cedro.info>
To:        Hans Petter Selasky <hps@selasky.org>
Cc:        Ian Lepore <ian@freebsd.org>, "freebsd-usb@FreeBSD.org" <freebsd-usb@freebsd.org>
Subject:   Re: USB/U3G: Added support for Panasonic CF-F9 GOBI 3G modem to U3G module
Message-ID:  <CAFYkXjkzm%2Bz4c9chtvO_Go9cfnn3_Awpx2m%2BcvNUZR_qxX1-Sw@mail.gmail.com>
In-Reply-To: <87d62aba-0b35-8b20-cf1f-9fd2de2d301a@selasky.org>
References:  <CAFYkXjnF%2BwkrxNC6nf9s20AytVkszykEcPsr=roiaYugAo5YWg@mail.gmail.com> <ec4baec2-66a9-c5ce-eb89-01f553890a11@selasky.org> <1506465459.73082.168.camel@freebsd.org> <165556bc-c011-bebd-feee-5bbd4cb5943e@selasky.org> <CAFYkXjm=TsHzjXgfFFRyXdSnj3RoeN%2BMNE_K5DBuHphygcqyjw@mail.gmail.com> <1506876055.22078.24.camel@freebsd.org> <CAFYkXjkYsfdWPBJu_wQWZcbHzR9vG0W7qdscBF1ornsZik6gbw@mail.gmail.com> <87d62aba-0b35-8b20-cf1f-9fd2de2d301a@selasky.org>

next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Oct 1, 2017 at 7:21 PM, Hans Petter Selasky <hps@selasky.org> wrote:
> On 10/01/17 19:09, Tomasz CEDRO wrote:
>>
>> On Sun, Oct 1, 2017 at 6:40 PM, Ian Lepore <ian@freebsd.org> wrote:
>>>
>>> On Sun, 2017-10-01 at 18:33 +0200, Tomasz CEDRO wrote:
>>>>
>>>> On Wed, Sep 27, 2017 at 8:32 AM, Hans Petter Selasky <hps@selasky.org
>>>>>
>>>>> wrote:
>>>>>
>>>>> On 09/27/17 00:37, Ian Lepore wrote:
>>>>>>
>>>>>>
>>>>>>
>>>>>> On Wed, 2017-09-27 at 00:30 +0200, Hans Petter Selasky wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 09/27/17 00:11, Tomasz CEDRO wrote:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> https://github.com/freebsd/freebsd/pull/115
>>>>>>>>
>>>>>>>> :-)
>>>>>>>>
>>>>>>> The devd.conf rule should match more than just vendor and
>>>>>>> product:
>>>>>>>
>>>>>>>
>>>>>>> +# Load GOBI 2000/3000 U3G QDL modem firmware on attach / boot.
>>>>>>> +# Note: This requires additional "gobi_loader" utility to be
>>>>>>> installed,
>>>>>>> +#   as well as valid QDL driver firmware files placed in
>>>>>>> /boot/firmware/gobi.
>>>>>>> +#   If modem does not accept valid firmware try gobi_loader
>>>>>>> -2000
>>>>>>> switch.
>>>>>>> +#   Please adjust modem VID/PID to match your device supported
>>>>>>> by
>>>>>>> u3g
>>>>>>> module.
>>>>>>> +#attach 100 {
>>>>>>> +#      match "vendor" "0x04da";
>>>>>>> +#      match "product" "0x250e";
>>>>>>> +#      action "/usr/local/sbin/gobi_loader /dev/cuaU0
>>>>>>> /boot/firmware/gobi/";
>>>>>>> +#};
>>>>>>>
>>>>>>> Else patch looks good.
>>>>>>>
>>>>>>> --HPS
>>>>>>
>>>>>>
>>>>>> Hard-coding /dev/cuaU0 cannot possibly be right.
>>>>>>
>>>>>> -- Ian
>>>>>>
>>>>> These three lines are missing:
>>>>>
>>>>>          match "system"          "DEVFS";
>>>>>          match "subsystem"       "CDEV";
>>>>>          match "type"            "CREATE";
>>>>>
>>>>>
>>>>> --HPS
>>>>
>>>> Thanks! Updated! :-)
>>>>
>>>> https://github.com/freebsd/freebsd/pull/115
>>>>
>>>
>>> If this is to be an example, it should be correct.  Please replace the
>>> "cuaU0" with "$cdev".  (See /etc/devd/uath.conf for an example).
>>>
>>> -- Ian
>>
>>
>> Thanks Ian! Is it okay now? I have moved this example to dedicated
>> /etc/devd/u3g.conf file, and added u3g load to /etc/devd/usb.conf.. if
>> syntax is okay I will verify on my laptop..
>>
>> https://github.com/freebsd/freebsd/pull/115
>>
>
> Looks good to me. Don't forget to MFC!
>
> --HPS

/etc/devd/u3g.conf:

notify 100 {
 match "system" "USB";
 match "subsystem" "DEVICE";
 match "type" "ATTACH";
 match "vendor" "0x04da";
 match "product" "0x250e";
 action "/usr/local/bin/gobi_loader /dev/$cdev /boot/firmware/gobi/";
};

This does not work when /dev/$cdev is used.. but it works when
/dev/cuaU0 is used. Ian, could you please advise? :-)

-- 
CeDeROM, SQ7MHZ, http://www.tomek.cedro.info



Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAFYkXjkzm%2Bz4c9chtvO_Go9cfnn3_Awpx2m%2BcvNUZR_qxX1-Sw>