Date: Wed, 28 Dec 2011 18:24:03 +0200 From: Omer Faruk SEN <omerfsen@gmail.com> To: FreeBSD <freebsd-questions@freebsd.org> Subject: ISP driver and FreeBSD Message-ID: <CAG%2Br6L8qNvgVQ8cb1Hd%2Bekrnifmqvnh5ztmDqDZqQcG75rPw4A@mail.gmail.com>
next in thread | raw e-mail | index | archive | help
Hi,
I have a dual port HBA:
isp0@pci0:2:0:0: class=0x0c0400 card=0x015d1077 chip=0x25321077
rev=0x02 hdr=0x00
vendor = 'QLogic Corporation'
device = '8Gb PCIe x8 Single/Dual Fibre Channel HBA (ISP2532)'
class = serial bus
subclass = Fibre Channel
isp1@pci0:2:0:1: class=0x0c0400 card=0x015d1077 chip=0x25321077
rev=0x02 hdr=0x00
vendor = 'QLogic Corporation'
device = '8Gb PCIe x8 Single/Dual Fibre Channel HBA (ISP2532)'
class = serial bus
subclass = Fibre Channel
for the SAN Storage we use EMC VNX5100. I have enabled driver
/boot/loader.conf:
isp_load="YES"
ispfw_load="YES"
I have attached a LUN but I can see the daX disks and get following error:
# grep da0 /var/run/dmesg.boot
(da0:isp0:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da0:isp0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:25,0 (Logical unit not
supported)
(da0:isp0:0:0:0): fatal error, failed to attach to device
(da0:isp0:0:0:0): lost device
(da0:isp0:0:0:0): removing device entry
# grep da1 /var/run/dmesg.boot
(da1:isp1:0:0:0): READ CAPACITY(10). CDB: 25 0 0 0 0 0 0 0 0 0
(da1:isp1:0:0:0): SCSI sense: ILLEGAL REQUEST asc:25,0 (Logical unit not
supported)
(da1:isp1:0:0:0): fatal error, failed to attach to device
(da1:isp1:0:0:0): lost device
(da1:isp1:0:0:0): removing device entry
Can anyone guide me what may be the problem. I use FreeBSD 8.1 amd64
Regards.
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAG%2Br6L8qNvgVQ8cb1Hd%2Bekrnifmqvnh5ztmDqDZqQcG75rPw4A>