Date: Tue, 15 Oct 2019 11:09:58 -0700 From: Michael Sierchio <kudzu@tenebras.com> To: Mathias Picker <Mathias.Picker@virtual-earth.de> Cc: FreeBSD Questions <freebsd-questions@freebsd.org> Subject: Re: MicroSD-Reader on Yoga X1 3rd gen does not work Message-ID: <CAHu1Y72i8hN2LefNbXBogkTeQVkRRPZ=7c18%2B1g0U1mgvVgKVQ@mail.gmail.com> In-Reply-To: <861rvdj43x.fsf@virtual-earth.de> References: <861rvdj43x.fsf@virtual-earth.de>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Oct 15, 2019 at 10:44 AM Mathias Picker < Mathias.Picker@virtual-earth.de> wrote: > Hi all, > > I=E2=80=99m trying the MicroSD-Reader on my X1 Yoga for the first time, > and get: > > Oct 15 19:31:35 Danton kernel: (da0:umass-sim0:0:0:0): > READ(10). CDB: 28 00 0e e2 af c1 00 00 04 00 > Oct 15 19:31:35 Danton kernel: (da0:umass-sim0:0:0:0): CAM status: > CCB request completed with an error > Oct 15 19:31:35 Danton kernel: (da0:umass-sim0:0:0:0): Retrying > command, 1 more tries remain > > Hey, Matthias =E2=80=93 What is your kernel config? And/or are you loading the appropriate kernel module? And show the contents of /var/run/dmesg.boot I have: device mmc # MMC/SD bus device mmcsd # MMC/SD memory card device sdhci # Generic PCI SD Host Controller And sdhci_pci0: <Generic SD HCI> mem 0xf7f27000-0xf7f270ff at device 20.7 on pci0 sdhci_pci0: 1 slot(s) allocated Without that, I get the probe on the CAM bus, but the device isn't recognized. If everything checks out with the above, it may be work looking at the kern.cam boot time sysctl vars Hope that helps. =E2=80=93 M --=20 "Well," Brahm=C4=81 said, "even after ten thousand explanations, a fool is = no wiser, but an intelligent person requires only two thousand five hundred." - The Mah=C4=81bh=C4=81rata
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAHu1Y72i8hN2LefNbXBogkTeQVkRRPZ=7c18%2B1g0U1mgvVgKVQ>