Date: Mon, 29 Jul 2013 07:30:20 -0700 From: Adrian Chadd <adrian@freebsd.org> To: Anthony Jenkins <Scoobi_doo@yahoo.com> Cc: "freebsd-wireless@freebsd.org" <freebsd-wireless@freebsd.org> Subject: Re: Atheros AR9565 detected, not working Message-ID: <CAJ-VmokdVYQS1KBZZSxaTXqf18WzuAzQQ5XagqbZfePiYU0qnA@mail.gmail.com> In-Reply-To: <51F67A5E.1010603@yahoo.com> References: <51F67A5E.1010603@yahoo.com>
next in thread | previous in thread | raw e-mail | index | archive | help
Hm, maybe rfkill is set?
The AR9565 is supported. I have the reference NICs from Atheros; they
work just fine.
It may be some kind of ACPI setting to enable/disable RFKill so the
radio side is actually enabled.
I'm sorry, I don't have much more than that to offer without having
the laptop here.
If someone's willing to send me one, I'll get 10 + wireless working on
it and then hand it over to ixsystems to join the 'stuff we really
should get pcbsd running smoothly on' pile. They're about $500 off of
amazon.com.
Thanks,
-adrian
On 29 July 2013 07:21, Anthony Jenkins <Scoobi_doo@yahoo.com> wrote:
> I just got an HP ENVY Sleekbook 6z-1100 laptop hoping it came with a
> FreeBSD-supported wireless NIC. It has an Atheros AR9565 and looking at the
> logs it _seems_ like it should be working, but I get no network traffic. I
> haven't started the Atheros debugging procedure yet, save to compile in
> option AH_DEBUG and move ath(4) out of the kernel & to a module to
> facilitate changes. Works (of course) in Win8 which came with laptop.
> Wireless enabled LED is amber (disabled) in FreeBSD, goes from amber to
> white (enabled) when I boot the Win8 HDD.
>
> Here's various logs and misc. system info. What should I try next? Thanks
> in advance!
>
> [root@laptop /usr/src]# uname -a n
> FreeBSD laptop.qtchat.org 10.0-CURRENT FreeBSD 10.0-CURRENT #0: Sat Jul 27
> 23:45:30 EDT 2013 root@laptop.qtchat.org:/usr/obj/usr/src/sys/MYKERNEL
> amd64
>
> [root@laptop /usr/src]# dmesg
> Copyright (c) 1992-2013 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 10.0-CURRENT #0: Sat Jul 27 23:45:30 EDT 2013
> root@laptop.qtchat.org:/usr/obj/usr/src/sys/MYKERNEL amd64
> FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
> module_register: module pci/xhci already exists!
> Module pci/xhci failed to register: 17
> CPU: AMD A10-4655M APU with Radeon(tm) HD Graphics (1996.31-MHz K8-class
> CPU)
> Origin = "AuthenticAMD" Id = 0x610f01 Family = 0x15 Model = 0x10
> Stepping = 1
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
> Features2=0x3e98320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C>
> AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
> AMD
> Features2=0x1abbfff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,XOP,SKINIT,WDT,LWP,FMA4,<b17>,NodeId,TBM,<b23>,<b24>>
> Standard Extended Features=0x8<BMI1>
> TSC: P-state invariant, performance statistics
> real memory = 17179869184 (16384 MB)
> avail memory = 15463530496 (14747 MB)
> Event timer "LAPIC" quality 400
> ACPI APIC Table: <HPQOEM 18DE >
> FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
> FreeBSD/SMP: 1 package(s) x 4 core(s)
> cpu0 (BSP): APIC ID: 16
> cpu1 (AP): APIC ID: 17
> cpu2 (AP): APIC ID: 18
> cpu3 (AP): APIC ID: 19
> ioapic0: Changing APIC ID to 4
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> acpi0: <HPQOEM SLIC-MPC> on motherboard
> acpi0: Power Button (fixed)
> cpu0: <ACPI CPU> on acpi0
> cpu1: <ACPI CPU> on acpi0
> cpu2: <ACPI CPU> on acpi0
> cpu3: <ACPI CPU> on acpi0
> hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 950
> atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
> Event timer "RTC" frequency 32768 Hz quality 0
> attimer0: <AT timer> port 0x40-0x43 on acpi0
> Timecounter "i8254" frequency 1193182 Hz quality 0
> Event timer "i8254" frequency 1193182 Hz quality 100
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
> acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 iomem
> 0xff000000-0xff000fff on acpi0
> acpi_button0: <Power Button> on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> vgapci0: <VGA-compatible display> port 0x3000-0x30ff mem
> 0xe0000000-0xefffffff,0xf0300000-0xf033ffff irq 17 at device 1.0 on pci0
> acpi_video0: <ACPI video extension> on vgapci0
> hdac0: <ATI (0x9902) HDA Controller> mem 0xf0344000-0xf0347fff irq 18 at
> device 1.1 on pci0
> hdac0: hdac_get_capabilities: Invalid corb size (0); assuming 256.
> hdac0: hdac_get_capabilities: Invalid rirb size (0); assuming 256.
> pcib1: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> pci1: <unknown> at device 0.0 (no driver attached)
> re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port
> 0x2000-0x20ff mem 0xf0004000-0xf0004fff,0xf0000000-0xf0003fff irq 16 at
> device 0.2 on pci1
> re0: Using 1 MSI-X message
> re0: turning off MSI enable bit.
> re0: ASPM disabled
> re0: Chip rev. 0x48800000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
> rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX,
> 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master,
> 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
> re0: Ethernet address: 6c:3b:e5:81:21:f0
> pcib2: <ACPI PCI-PCI bridge> at device 5.0 on pci0
> pci2: <ACPI PCI bus> on pcib2
> ath0: <Qualcomm Atheros AR9565> mem 0xf0100000-0xf017ffff irq 17 at device
> 0.0 on pci2
> ar9300_set_stub_functions: setting stub functions
> ar9300_set_stub_functions: setting stub functions
> ar9300_attach: calling ar9300_hw_attach
> ar9300_hw_attach: calling ar9300_eeprom_attach
> ar9300_flash_map: unimplemented for now
> Restoring Cal data from DRAM
> Restoring Cal data from EEPROM
> Restoring Cal data from Flash
> Restoring Cal data from Flash
> Restoring Cal data from OTP
> ar9300_hw_attach: ar9300_eeprom_attach returned 0
> ar9300_fill_capability_info: (MCI) MCI support = 1
> ath0: RX status length: 48
> ath0: RX buffer size: 4096
> ath0: TX descriptor length: 128
> ath0: TX status length: 36
> ath0: TX buffers per descriptor: 4
> ar9300_freebsd_setup_x_tx_desc: called, 0x0/0, 0x0/0, 0x0/0
> ath0: ath_edma_setup_rxfifo: type=0, FIFO depth = 16 entries
> ath0: ath_edma_setup_rxfifo: type=1, FIFO depth = 128 entries
> ath0: [HT] enabling HT modes
> ath0: [HT] enabling short-GI in 20MHz mode
> ath0: [HT] 1 stream STBC receive enabled
> ath0: [HT] 1 RX streams; 1 TX streams
> ath0: AR9565 mac 704.0 RF5110 phy 526.12
> ath0: 2GHz radio: 0x0000; 5GHz radio: 0x0000
> xhci0: <XHCI (generic) USB 3.0 controller> mem 0xf0348000-0xf0349fff irq 18
> at device 16.0 on pci0
> usbus0: waiting for BIOS to give up control
> xhci0: 32 byte context size.
> usbus0 on xhci0
> ahci0: <AMD Hudson-2 AHCI SATA controller> port
> 0x3118-0x311f,0x3124-0x3127,0x3110-0x3117,0x3120-0x3123,0x3100-0x310f mem
> 0xf034e000-0xf034e7ff irq 19 at device 17.0 on pci0
> ahci0: AHCI v1.30 with 1 6Gbps ports, Port Multiplier supported
> ahcich0: <AHCI channel> at channel 0 on ahci0
> ohci0: <OHCI (generic) USB controller> mem 0xf034d000-0xf034dfff irq 18 at
> device 18.0 on pci0
> usbus1 on ohci0
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xf034c000-0xf034c0ff irq 17
> at device 18.2 on pci0
> usbus2: EHCI version 1.0
> usbus2 on ehci0
> ohci1: <OHCI (generic) USB controller> mem 0xf034b000-0xf034bfff irq 18 at
> device 19.0 on pci0
> usbus3 on ohci1
> ehci1: <EHCI (generic) USB 2.0 controller> mem 0xf034a000-0xf034a0ff irq 17
> at device 19.2 on pci0
> usbus4: EHCI version 1.0
> usbus4 on ehci1
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> hdac1: <Generic (0x780d1022) HDA Controller> mem 0xf0340000-0xf0343fff irq
> 16 at device 20.2 on pci0
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib3: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci3: <ACPI PCI bus> on pcib3
> acpi_lid0: <Control Method Lid Switch> on acpi0
> acpi_tz0: <Thermal Zone> on acpi0
> acpi_tz0: _CRT value is absurd, ignored (226.8C)
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> psm0: <PS/2 Mouse> irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: model Synaptics Touchpad, device ID 0
> battery0: <ACPI Control Method Battery> on acpi0
> acpi_acad0: <AC Adapter> on acpi0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ctl: CAM Target Layer loaded
> acpi_throttle0: <ACPI CPU Throttling> on cpu0
> acpi_throttle1: <ACPI CPU Throttling> on cpu1
> acpi_throttle1: failed to attach P_CNT
> device_attach: acpi_throttle1 attach returned 6
> acpi_throttle2: <ACPI CPU Throttling> on cpu2
> acpi_throttle2: failed to attach P_CNT
> device_attach: acpi_throttle2 attach returned 6
> acpi_throttle3: <ACPI CPU Throttling> on cpu3
> acpi_throttle3: failed to attach P_CNT
> device_attach: acpi_throttle3 attach returned 6
> ZFS filesystem version: 5
> ZFS storage pool version: features support (5000)
> Timecounters tick every 1.000 msec
> hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
> hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
> pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
> hdacc1: <IDT 92HD91BXX HDA CODEC> at cad 0 on hdac1
> hdaa1: <IDT 92HD91BXX Audio Function Group> at nid 1 on hdacc1
> pcm1: <IDT 92HD91BXX (Analog 2.0+HP/2.0)> at nid 13,11 and 12 on hdaa1
> pcm2: <IDT 92HD91BXX (Analog Mic)> at nid 17 on hdaa1
> usbus0: 5.0Gbps Super Speed USB v3.0
> usbus1: 12Mbps Full Speed USB v1.0
> usbus2: 480Mbps High Speed USB v2.0
> usbus3: 12Mbps Full Speed USB v1.0
> usbus4: 480Mbps High Speed USB v2.0
> ugen3.1: <AMD> at usbus3
> uhub0: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> ugen2.1: <AMD> at usbus2
> uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> ugen1.1: <AMD> at usbus1
> uhub2: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> ugen0.1: <0x1022> at usbus0
> uhub3: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
> ugen4.1: <AMD> at usbus4
> uhub4: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
> ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
> ada0: <Samsung SSD 840 Series DXT06B0Q> ATA-9 SATA 3.x device
> ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
> ada0: Command Queueing enabled
> ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
> ada0: Previously was known as ad4
> SMP: AP CPU #3 Launched!
> SMP: AP CPU #1 Launched!
> SMP: AP CPU #2 Launched!
> Timecounter "TSC" frequency 1996309068 Hz quality 1000
> Root mount waiting for: usbus4 usbus3 usbus2 usbus1 usbus0
> uhub0: 5 ports with 5 removable, self powered
> uhub2: 5 ports with 5 removable, self powered
> ACPI Error: No handler for Region [RCM0] (0xfffffe0026ac6b00) [SystemCMOS]
> (20130626/evregion-178)
> ACPI Error: Region SystemCMOS (ID=5) has no handler (20130626/exfldio-320)
> ACPI Error: Method parse/execution failed [\134_SB_.WMID.ESDT] (Node
> 0xfffffe0026adac40), AE_NOT_EXIST (20130626/psparse-553)
> ACPI Error: Method parse/execution failed [\134_SB_.PCI0.LPC0.EC0_._Q42]
> (Node 0xfffffe0026ae8340), AE_NOT_EXIST (20130626/psparse-553)
> acpi_ec0: evaluation of query method _Q42 failed: AE_NOT_EXIST
> uhub3: 4 ports with 4 removable, self powered
> Root mount waiting for: usbus4 usbus2
> uhub1: 5 ports with 5 removable, self powered
> uhub4: 5 ports with 5 removable, self powered
> Root mount waiting for: usbus4 usbus2
> ugen2.2: <Ralink> at usbus2
> ugen4.2: <SuYin> at usbus4
> Trying to mount root from zfs:sys []...
> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
> ugen3.2: <vendor 0x0cf3> at usbus3
> ar9300_Stub_GetCTSTimeout: called
> ar9300_Stub_GetCTSTimeout: called
> ar9300_Stub_GetAntennaSwitch: called
> ar9300_Stub_GetAntennaSwitch: called
> wlan1: Ethernet address: 20:68:9d:c5:76:8d
> run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
> run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
> 1c:bd:b9:8c:9d:71
> ubt0: <vendor 0x0cf3 product 0x311f, class 224/1, rev 1.10/0.01, addr 2> on
> usbus3
> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
> run0: firmware RT3071 ver. 0.236 loaded
> WARNING: attempt to domain_add(bluetooth) after domainfinalize()
> WARNING: attempt to domain_add(netgraph) after domainfinalize()
> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
> WARNING pid 2654 (python2.7): ioctl sign-extension ioctl ffffffff80087467
> WARNING pid 2655 (python2.7): ioctl sign-extension ioctl ffffffff80087467
> WARNING pid 2656 (python2.7): ioctl sign-extension ioctl ffffffff80087467
> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
> run0: firmware RT3071 ver. 0.236 loaded
> wlan0: link state changed to UP
> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
> uhub3: at usbus0, port 1, addr 1 (disconnected)
> uhub2: at usbus1, port 1, addr 1 (disconnected)
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> uhub1: at usbus2, port 1, addr 1 (disconnected)
> ugen2.2: <Ralink> at usbus2 (disconnected)
> run0: at uhub1, port 1, addr 2 (disconnected)
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> wlan0: link state changed to DOWN
> uhub0: at usbus3, port 1, addr 1 (disconnected)
> ugen3.2: <vendor 0x0cf3> at usbus3 (disconnected)
> ubt0: at uhub0, port 4, addr 2 (disconnected)
> xhci_interrupt: host controller halted
> xhci_interrupt: host controller halted
> uhub4: at usbus4, port 1, addr 1 (disconnected)
> ugen4.2: <SuYin> at usbus4 (disconnected)
> ACPI Error: No handler for Region [RCM0] (0xfffffe0026ac6b00) [SystemCMOS]
> (20130626/evregion-178)
> ACPI Error: Region SystemCMOS (ID=5) has no handler (20130626/exfldio-320)
> ACPI Error: Method parse/execution failed [\134_SB_.WMID.ESDT] (Node
> 0xfffffe0026adac40), AE_NOT_EXIST (20130626/psparse-553)
> ACPI Error: Method parse/execution failed [\134_PTS] (Node
> 0xfffffe0026ab4c80), AE_NOT_EXIST (20130626/psparse-553)
> acpi0: AcpiEnterSleepStatePrep failed - AE_NOT_EXIST
> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
> xhci0: 32 byte context size.
> uhub0: <0x1022 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
> uhub1: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
> uhub2: <AMD EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
> uhub3: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
> uhub4: <AMD OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
> uhub0: 4 ports with 4 removable, self powered
> uhub4: 5 ports with 5 removable, self powered
> uhub3: 5 ports with 5 removable, self powered
> uhub1: 5 ports with 5 removable, self powered
> uhub2: 5 ports with 5 removable, self powered
> ugen2.2: <Ralink> at usbus2
> run0: <Ralink 11n Adapter, class 0/0, rev 2.00/1.01, addr 2> on usbus2
> ugen4.2: <SuYin> at usbus4
> run0: MAC/BBP RT3071 (rev 0x0213), RF RT3022 (MIMO 2T2R), address
> 1c:bd:b9:8c:9d:71
> wlan0: Ethernet address: 1c:bd:b9:8c:9d:71
> run0: firmware RT3071 ver. 0.236 loaded
> ugen3.2: <vendor 0x0cf3> at usbus3
> ubt0: <vendor 0x0cf3 product 0x311f, class 224/1, rev 1.10/0.01, addr 2> on
> usbus3
> wlan0: link state changed to UP
> can't evaluate \134_SB_.PCI0.VGA_.LCD_._DCS - AE_NOT_FOUND
>
> [root@laptop /usr/src]# cat /etc/rc.conf
> wlans_run0="wlan0"
> wlans_ath0="wlan1"
> ifconfig_wlan0="DHCP WPA"
> ...
>
> [root@laptop /usr/src]# ifconfig -a
> ath0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 2290
> ether 20:68:9d:c5:76:8d
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
> status: no carrier
> wlan1: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 20:68:9d:c5:76:8d
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
> status: no carrier
> ssid "" channel 1 (2412 MHz 11b)
> regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7
> scanvalid 60 wme burst bintval 0
> ...
>
> [root@laptop /usr/src]# /etc/rc.d/netif start ath0
> Starting Network: ath0.
> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
> ether 20:68:9d:c5:76:8d
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
> status: associated
> Additional inet routing options: ignore ICMP redirect=YES log ICMP
> redirect=YES.
>
> [root@laptop /usr/src]# for iface in ath0 wlan1; do ifconfig ${iface}; done
> ath0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
> ether 20:68:9d:c5:76:8d
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
> status: associated
> wlan1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
> ether 20:68:9d:c5:76:8d
> inet 67.215.65.145 netmask 0xff000000 broadcast 67.215.65.145
> nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
> media: IEEE 802.11 Wireless Ethernet autoselect (autoselect)
> status: no carrier
> ssid "" channel 2 (2417 MHz 11g)
> regdomain 106 indoor ecm authmode OPEN privacy OFF txpower 20 bmiss 7
> scanvalid 60 protmode CTS wme burst
>
> [root@laptop /usr/src]# dmesg
> ...
> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
> ath0: ath_edma_recv_tasklet: sc_inreset_cnt > 0; skipping
>
>
> --
> Anthony Jenkins
> _______________________________________________
> freebsd-wireless@freebsd.org mailing list
> http://lists.freebsd.org/mailman/listinfo/freebsd-wireless
> To unsubscribe, send any mail to "freebsd-wireless-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAJ-VmokdVYQS1KBZZSxaTXqf18WzuAzQQ5XagqbZfePiYU0qnA>