Date: Fri, 16 Nov 2018 10:44:19 -0700 From: Kevin Bowling <kevin.bowling@kev009.com> To: dclarke@blastwave.org Cc: FreeBSD PowerPC ML <freebsd-ppc@freebsd.org> Subject: Re: dmesg from live DVD on a PowerMac G5 (quad) with ada0: quirks=0x1<4K> Message-ID: <CAK7dMtCF9jpYi7P%2BYZwPKm31AYz-ncOYCEovGy_j4hjb_p3JuA@mail.gmail.com> In-Reply-To: <673b7af7-b31d-b121-ab24-31a4d746e71d@blastwave.org> References: <b7070426-2535-5920-5263-50d58365d919@blastwave.org> <673b7af7-b31d-b121-ab24-31a4d746e71d@blastwave.org>
next in thread | previous in thread | raw e-mail | index | archive | help
Please add to https://dmesgd.nycbug.org/index.cgi this is being used to see what kind of cpu/nic/storage people are using On Thu, Nov 15, 2018 at 9:00 AM Dennis Clarke <dclarke@blastwave.org> wrote: > > On 11/14/18 4:58 PM, Dennis Clarke wrote: > > > > Firstly I can tell you that I have gone through the motions of a full > > install twice and in both cases the system will not boot after install. > > The first boot either consists of a strange message asking for where the > > root filesystem is or I get an even more cryptic white screen from the > > openfirmware. > > > > Firstly a dmesg from the live DVD is attached and here is a picture of > > the dreaded first boot white screen : https://i.imgur.com/eI9VvJD.png > > > > Nothing happens after seeing that. > > > > Also the install was slower than nearly anything I have experienced > > since the '90s. I recall once doing an install of Lotus Notes server > > onto a Sun SPARCCenter 2000E while using a 28.8kbit modem connection and > > an X connection over the slip interface. That was slower. Not by much. > > > > This is a brand new shiney seagate disk also. > > > > The dmesg output was trimmed by the mail list server so here it is : > > ---<<BOOT>>--- > Copyright (c) 1992-2018 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD is a registered trademark of The FreeBSD Foundation. > FreeBSD 12.0-BETA4 r340271 GENERIC powerpc > gcc version 4.2.1 20070831 patched [FreeBSD] > VT(ofwfb): resolution 1280x1024 > cpu0: IBM PowerPC 970MP revision 1.1, 2500.31 MHz > cpu0: Features dc000000<PPC32,PPC64,ALTIVEC,FPU,MMU> > cpu0: HID0 1511081<DEEPNAP,NAP,DPM,NHR,TBEN,ENATTN> > real memory = 8541925376 (8146 MB) > avail memory = 8152723456 (7775 MB) > arc4random: no preloaded entropy cache > random: entropy device external interface > kbd0 at kbdmux0 > ofwbus0: <Open Firmware Device Tree> on nexus0 > cpulist0: <Open Firmware CPU Group> on ofwbus0 > cpu0: <Open Firmware CPU> on cpulist0 > pcr0: <PPC 970 Power Control Register> on cpu0 > cpu1: <Open Firmware CPU> on cpulist0 > pcr1: <PPC 970 Power Control Register> on cpu1 > cpu2: <Open Firmware CPU> on cpulist0 > pcr2: <PPC 970 Power Control Register> on cpu2 > cpu3: <Open Firmware CPU> on cpulist0 > pcr3: <PPC 970 Power Control Register> on cpu3 > powermac_nvram0: <Apple NVRAM> mem 0xfff04000-0xfff07fff on ofwbus0 > powermac_nvram0: bank0 generation 452, bank1 generation 453 > unin0: <Apple UniNorth System Controller> mem 0xf8000000-0xf8ffffff on > ofwbus0 > unin0: Version 66 > iichb0: <Keywest I2C controller> mem 0xf8001000-0xf8001fff irq 0 on unin0 > iicbus0: <OFW I2C bus> on iichb0 > iic0: <I2C generic I/O> on iicbus0 > ds17750: <Temp-Monitor DS1775> at addr 0x94 on iicbus0 > ds16310: <Temp-Monitor DS1631> at addr 0x96 on iicbus0 > max66900: <Temp-Monitor MAX6690> at addr 0x98 on iicbus0 > max66901: <Temp-Monitor MAX6690> at addr 0x9c on iicbus0 > htpic0: <OpenPIC Interrupt Controller> mem 0xf8040000-0xf807ffff on unin0 > pcib0: <IBM CPC945 PCI Express Root> mem 0xf0000000-0xf1ffffff on ofwbus0 > pci0: <OFW PCI bus> on pcib0 > vgapci0: <VGA-compatible display> mem > 0xa1000000-0xa1ffffff,0x90000000-0x9fffffff,0xa0000000-0xa0ffffff irq 3 > at device 0.0 on pci0 > vgapci0: Boot video device > pcib1: <IBM CPC9X5 HyperTransport Tunnel> mem > 0xf2000000-0xf47fffff,0xf8070000-0xf8070fff on ofwbus0 > pcib1: 86 HT IRQs on device 7.0 > pci1: <OFW PCI bus> on pcib1 > pcib1: Enabling MSI window for HyperTransport slave at pci1:0:1:0 > pcib2: <OFW PCI-PCI bridge> at device 1.0 on pci1 > pci2: <OFW PCI bus> on pcib2 > pcib3: <OFW PCI-PCI bridge> at device 2.0 on pci1 > pci3: <OFW PCI bus> on pcib3 > bge0: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem > 0xfa530000-0xfa53ffff,0xfa520000-0xfa52ffff irq 66 at device 4.0 on pci3 > bge0: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz > miibus0: <MII bus> on bge0 > brgphy0: <BCM5780 1000BASE-T media interface> PHY 1 on miibus0 > brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > bge0: Ethernet address: 00:14:51:64:67:10 > bge1: <Broadcom BCM5714 B3, ASIC rev. 0x008003> mem > 0xfa510000-0xfa51ffff,0xfa500000-0xfa50ffff irq 67 at device 4.1 on pci3 > bge1: CHIP ID 0x00008003; ASIC REV 0x08; CHIP REV 0x80; PCI-X 33 MHz > miibus1: <MII bus> on bge1 > brgphy1: <BCM5780 1000BASE-T media interface> PHY 1 on miibus1 > brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, > 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow > bge1: Ethernet address: 00:14:51:64:67:11 > pcib4: <OFW PCI-PCI bridge> at device 3.0 on pci1 > pci4: <OFW PCI bus> on pcib4 > pcib5: <OFW PCI-PCI bridge> at device 4.0 on pci1 > pci5: <OFW PCI bus> on pcib5 > pcib6: <OFW PCI-PCI bridge> at device 5.0 on pci1 > pci6: <OFW PCI bus> on pcib6 > pcib7: <OFW PCI-PCI bridge> at device 6.0 on pci1 > pci7: <OFW PCI bus> on pcib7 > pcib8: <OFW PCI-PCI bridge> at device 7.0 on pci1 > pci8: <OFW PCI bus> on pcib8 > gem0: <Apple Shasta GMAC Ethernet> mem 0xfa200000-0xfa3fffff at device > 15.0 on pci8 > gem0: invalid MAC address > device_attach: gem0 attach returned 6 > pcib9: <OFW PCI-PCI bridge> at device 8.0 on pci1 > pci9: <OFW PCI bus> on pcib9 > macio0: <Shasta I/O Controller> mem 0x80000000-0x8007ffff at device 7.0 > on pci9 > macgpio0: <MacIO GPIO Controller> mem 0x50-0x8a on macio0 > scc0: <Zilog Z8530 dual channel SCC> mem > 0x13000-0x13fff,0x8400-0x84ff,0x8500-0x85ff,0x8600-0x86ff,0x8700-0x87ff > irq 23,17,18,24,19,20 on macio0 > uart0: <z8530, channel A> on scc0 > uart1: <z8530, channel B> on scc0 > iichb1: <Keywest I2C controller> mem 0x18000-0x18fff irq 27 on macio0 > iicbus1: <OFW I2C bus> on iichb1 > iic1: <I2C generic I/O> on iicbus1 > onyx0: <Texas Instruments PCM3052 Audio Codec> at addr 0x8c on iicbus1 > iicbus1: <unknown card> at addr 0x24 > pcm0: <Apple I2S Audio Controller> mem > 0x10000-0x10fff,0x8000-0x80ff,0x8100-0x81ff irq 28,11,12,30,15,16 on macio0 > ohci0: <NEC uPD 9210 USB controller> mem 0x80082000-0x80082fff irq 70 at > device 11.0 on pci9 > usbus0 on ohci0 > ohci1: <NEC uPD 9210 USB controller> mem 0x80081000-0x80081fff irq 70 at > device 11.1 on pci9 > usbus1 on ohci1 > ehci0: <NEC uPD 72010x USB 2.0 controller> mem 0x80080000-0x800800ff irq > 70 at device 11.2 on pci9 > usbus2: EHCI version 1.0 > usbus2 on ehci0 > pcib10: <OFW PCI-PCI bridge> at device 9.0 on pci1 > pci10: <OFW PCI bus> on pcib10 > atapci0: <ServerWorks K2 SATA150 controller> mem 0xfa402000-0xfa403fff > irq 10 at device 12.0 on pci10 > pcib1: failed to reserve resource for pcib10 > atapci0: 0x10 bytes of rid 0x20 res 4 failed (0, 0xffffffffffffffff). > ata2: <ATA channel> at channel 0 on atapci0 > ata3: <ATA channel> at channel 1 on atapci0 > ata4: <ATA channel> at channel 2 on atapci0 > ata5: <ATA channel> at channel 3 on atapci0 > ata0: <Shasta Kauai ATA Controller> mem 0xfa404000-0xfa407fff irq 38,37 > at device 13.0 on pci10 > fwohci0: <1394 Open Host Controller Interface> mem 0xfa400000-0xfa400fff > irq 39 at device 14.0 on pci10 > fwohci0: OHCI version 1.0 (ROM=0) > fwohci0: No. of Isochronous channels is 8. > fwohci0: EUI64 00:11:24:ff:fe:e5:13:d0 > fwohci0: invalid speed 7 (fixed to 3). > fwohci0: Phy 1394a available S800, 3 ports. > fwohci0: Link S800, max_rec 4096 bytes. > firewire0: <IEEE1394(FireWire) bus> on fwohci0 > fwe0: <Ethernet over FireWire> on firewire0 > if_fwe0: Fake Ethernet address: 02:11:24:e5:13:d0 > fwe0: Ethernet address: 02:11:24:e5:13:d0 > sbp0: <SBP-2/SCSI over FireWire> on firewire0 > fwohci0: Initiate bus reset > fwohci0: fwohci_intr_core: BUS reset > fwohci0: PhysicalUpperBound register is not implemented. Physical > memory access is limited to the first 4GB > fwohci0: PhysicalUpperBound = 0x00000000 > fwohci0: fwohci_intr_core: node_id=0x00000001, SelfID Count=1, > CYCLEMASTER mode > smu0: <Apple System Management Unit> on ofwbus0 > smu0: registered as a time-of-day clock, resolution 0.001000s > iichb2: <SMU I2C controller> on smu0 > iicbus2: <OFW I2C bus> on iichb2 > iic2: <I2C generic I/O> on iicbus2 > smusat0: <SMU Satellite Sensors> at addr 0xb0 on iicbus2 > smusat1: <SMU Satellite Sensors> at addr 0xb2 on iicbus2 > iicbus2: <unknown card> at addr 0xd4 > iichb3: <SMU I2C controller> on smu0 > iicbus3: <OFW I2C bus> on iichb3 > iic3: <I2C generic I/O> on iicbus3 > Timecounter "timebase" frequency 33333333 Hz quality 0 > Event timer "decrementer" frequency 33333333 Hz quality 1000 > Timecounters tick every 1.000 msec > firewire0: 2 nodes, maxhop <= 1 cable IRM irm(1) (me) > firewire0: bus manager 1 > bge0: link state changed to UP > usbus0: 12Mbps Full Speed USB v1.0 > usbus1: 12Mbps Full Speed USB v1.0 > max66900: 2 sensors detected. > max66901: 2 sensors detected. > ugen1.1: <NEC OHCI root HUB> at usbus1 > uhub0: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1 > ugen0.1: <NEC OHCI root HUB> at usbus0 > uhub1: <NEC OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0 > usbus2: 480Mbps High Speed USB v2.0 > ugen2.1: <NEC EHCI root HUB> at usbus2 > uhub2: <NEC EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2 > uhub0: 2 ports with 2 removable, self powered > uhub1: 3 ports with 3 removable, self powered > uhub2: 5 ports with 5 removable, self powered > ada0 at ata2 bus 0 scbus0 target 0 lun 0 > ada0: <ST3000DM001-1E6166 CC45> ATA8-ACS SATA 3.x device > ada0: Serial Number Z1F2XXJG > ada0: 150.000MB/s transfers (SATA 1.x, UDMA5, PIO 8192bytes) > ada0: 2861588MB (5860533168 512 byte sectors) > ada0: quirks=0x1<4K> > cd0 at ata0 bus 0 scbus4 target 0 lun 0 > cd0: <HL-DT-ST DVD-RW GWA-4165B C006> Removable CD-ROM SCSI device > cd0: Serial Number M0063NE3358 > cd0: 66.700MB/s transfers (UDMA4, ATAPI 12bytes, PIO 65534bytes) > cd0: 4482MB (2295104 2048 byte sectors) > Trying to mount root from cd9660:/dev/iso9660/12_0_BETA4_POWERPC64_DVD > [ro]... > ugen1.2: <Lite-On Technology Corp. USB Multimedia Keyboard> at usbus1 > ukbd0 on uhub0 > ukbd0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev > 1.10/1.04, addr 2> on usbus1 > kbd1 at ukbd0 > uhid0 on uhub0 > uhid0: <Lite-On Technology Corp. USB Multimedia Keyboard, class 0/0, rev > 1.10/1.04, addr 2> on usbus1 > random: unblocking device. > arc4random: no preloaded entropy cache > arc4random: no preloaded entropy cache > arc4random: no preloaded entropy cache > lo0: link state changed to UP > bge0: link state changed to DOWN > bge0: link state changed to UP > > Wasn't that long after all ... oops. > > Dennis > > _______________________________________________ > freebsd-ppc@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-ppc > To unsubscribe, send any mail to "freebsd-ppc-unsubscribe@freebsd.org"
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAK7dMtCF9jpYi7P%2BYZwPKm31AYz-ncOYCEovGy_j4hjb_p3JuA>