Date: Thu, 28 Nov 2019 07:47:52 +0530 From: vm finance <vm.finance2@gmail.com> To: Kurt Hackenberg <kh@panix.com> Cc: freebsd-questions@freebsd.org Subject: Re: FreeBSD-12.1 on laptop Message-ID: <CAKy-8=i07xSnz3yW3H1XCOJ8_7x_m1__e0r68HxUx-R7-A0x8w@mail.gmail.com> In-Reply-To: <5c2c0fe0-93fa-246e-a3ae-05e813e246df@panix.com> References: <CAKy-8=hUCNiAufHHgpLJTnbS_==aHT7UyspgjLyro-yEcxJ2_w@mail.gmail.com> <18414268-96b1-6112-2c91-345aea9e7f24@gmail.com> <CAKy-8=hb0rTOSRJ5bbT=GeQoKaZDoVNVUm%2B1o_pUYR6QGSg20A@mail.gmail.com> <20191127160215.GA69810@neutralgood.org> <20191127160441.GB69810@neutralgood.org> <CAKy-8=j8z9nAnko1Dcg7m-g3NC1e2raja2mupYedhk-LdxRNdA@mail.gmail.com> <30022fe5-800e-0a9a-fff6-8edb0171e153@denninger.net> <CAKy-8=h9jacsx0ZUSucF9qN7AZ6xdtzGoacwxccoWHm9OF-Baw@mail.gmail.com> <CAC=ypSUq8gc8LsWB=Lyz01ktfcBnBaYSuyP3KBo%2BSL9StAv7rw@mail.gmail.com> <CAKy-8=iVsLqNkwdxn_E-1R5t8mmp14JULN%2BKHRf-asWTzWcWfA@mail.gmail.com> <5c2c0fe0-93fa-246e-a3ae-05e813e246df@panix.com>
next in thread | previous in thread | raw e-mail | index | archive | help
I tried to add
hw.syscons.disable=3D1
to /boot/loader.conf but it stalls the system during bootup....
On Thu, Nov 28, 2019 at 5:34 AM Kurt Hackenberg <kh@panix.com> wrote:
> On 2019-11-27 13:33, vm finance wrote:
>
> > I had to comment out this exact line to get my system to boot
> successfully.
> > I actually have "Pro-level NVIDIA=C2=AE Quadro=C2=AE P500 graphics" on =
my P52S
> > Thinkpad.
> > Not sure if 12.1 has native support for this, or do I need to
> > download/build this.
> >
> > Per the discussions on this topic, I think I should stay away from pkg
> > ..drm-kmod
> ...
> >> kld_list=3D"/boot/modules/i915kms.ko"
> ...
> >>> However startx is still failing - same framebuffer error.
>
> All right, a few things are going on.
>
> It's true that to use any drm-kmod on 12.1, you have to compile it, so
> it matches the kernel. (Those packages are compiled for 12.0, and
> something changed in the kernel.)
>
> The framebuffer thing might be this: both versions of the AMD drm-kmod
> (modules amdgpu and radeon) interfere with the EFI framebuffer. This bug
> has not yet been tracked down. You can work around it by shutting off
> the system console during boot, by adding this to /boot/loader.conf:
> hw.syscons.disable=3D1
> There will be a system console after the drm-kmod driver is loaded and
> takes over. However, this is only a problem with UEFI boot;
> old-fashioned boot doesn't use that EFI framebuffer (I think it uses a
> VGA framebuffer instead). And it's never a problem with the Intel
> drm-kmod (i915kms), no matter how you boot.
>
> But neither of those drivers, Intel or AMD, applies to your Nvidia
> graphics processor. Nvidia writes drivers for their GPUs, but apparently
> does not give out source code, only binaries. I don't know whether
> FreeBSD distributes those binaries.
>
> But it's possible that your laptop computer has two graphics processors.
> Some do, apparently. That happens when the computer uses a main
> processor that has a graphics processor included in the package, and
> also has a separate graphics processor. I don't know why manufacturers
> do that.
>
> But maybe you can get by without any GPU driver, which means not using
> the graphics processor. Instead, graphics is done by software on the
> main processor, which is slower. That may or may not be fast enough. If
> your computer works, runs X and everything, without loading any graphics
> driver, maybe that's OK.
>
> Some documentation:
> https://freebsddesktop.github.io/
> https://wiki.freebsd.org/Graphics
> https://github.com/FreeBSDDesktop/kms-drm
> _______________________________________________
> freebsd-questions@freebsd.org mailing list
> https://lists.freebsd.org/mailman/listinfo/freebsd-questions
> To unsubscribe, send any mail to "
> freebsd-questions-unsubscribe@freebsd.org"
>
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAKy-8=i07xSnz3yW3H1XCOJ8_7x_m1__e0r68HxUx-R7-A0x8w>