Date: Sun, 28 Oct 2012 21:58:13 +0100 From: Big Yuuta <init.py@gmail.com> To: Alexander Motin <mav@freebsd.org> Cc: freebsd-questions@freebsd.org Subject: Re: No sound from speaker, using Realtek ALC269 and snd_hda Message-ID: <CAN5iB8QMm80VWzRFMsD=_vDN0HNLCoU2tb-Bt6n5qjUOcLHDXA@mail.gmail.com> In-Reply-To: <508D98C9.30603@FreeBSD.org> References: <CAN5iB8RJe=JY2zsDG40gtCwcf4uJBt0%2BtxiSSuHqnZ1Ob6=HZg@mail.gmail.com> <508D8755.1080501@FreeBSD.org> <CAN5iB8T9RySw4h5HaM=pCA_G8n4yVa%2BAwdz4_YO8yr-FFk3iZg@mail.gmail.com> <508D98C9.30603@FreeBSD.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Sun, Oct 28, 2012 at 9:42 PM, Alexander Motin <mav@freebsd.org> wrote: > On 28.10.2012 22:09, Big Yuuta wrote: >>> >>> CODEC configuration looks good and I see no problems in driver output. I >>> think most likely problem is in CODEC wiring and power amplifier. Your >>> CODEC >>> has two GPIO lines and EAPD line. That gives 8 possible combinations. I >>> would recommend you to try them all. GPIOs, as you tried could be set >>> with >>> hint.hdaa.0.gpio_config tunable. EAPD line can be controlled (0 or 100) >>> by >>> the ogain mixer control. >> >> >> You mean combinations like: >> >> hint.hdaa.0.gpio_config="0=set 1=set 2=set" > > > As I've told, there are only two GPIO pins, so only "0=X 1=Y", plus ogain > mixer control. So that would be: hint.hdaa.0.gpio_config="0=set 1=set" hint.hdaa.0.gpio_config="0=set 1=clear" hint.hdaa.0.gpio_config="0=clear 1=set" hint.hdaa.0.gpio_config="0=clear 1=clear" which I try with: mixer ogain 0:0 mixer ogain 100:100 I'm going to check once again, but I think that unfortunately that didn't work. I hope that I forgot a combination! Thanks again, Alexander
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CAN5iB8QMm80VWzRFMsD=_vDN0HNLCoU2tb-Bt6n5qjUOcLHDXA>