Date: Tue, 26 Sep 2017 16:45:48 -0600 From: Warner Losh <imp@bsdimp.com> To: Ian Lepore <ian@freebsd.org> Cc: Russell Haley <russ.haley@gmail.com>, Emmanuel Vadot <manu@bidouilliste.com>, freebsd-arm <freebsd-arm@freebsd.org> Subject: Re: CUBOX snapshots working? Message-ID: <CANCZdfqAM-kXuBq2YcngR9PKajxJSTa_UNpm-v7zbMH2bvpo6g@mail.gmail.com> In-Reply-To: <1506460653.73082.156.camel@freebsd.org> References: <201709260339.VAA16701@mail.lariat.net> <1506435673.73082.129.camel@freebsd.org> <201709261732.LAA21422@mail.lariat.net> <20170926200446.c188fda613df2ffb894b1ff3@bidouilliste.com> <1506450112.73082.143.camel@freebsd.org> <20170926204622.67ae9edbca62e2dcdbd1ea31@bidouilliste.com> <CABx9NuRSCe54e%2B3LjOJphGP=5EAWYbBtub-%2BEvsE9JHXYdcmbw@mail.gmail.com> <1506460653.73082.156.camel@freebsd.org>
next in thread | previous in thread | raw e-mail | index | archive | help
On Tue, Sep 26, 2017 at 3:17 PM, Ian Lepore <ian@freebsd.org> wrote: > On Tue, 2017-09-26 at 14:07 -0700, Russell Haley wrote: > > On Tue, Sep 26, 2017 at 11:46 AM, Emmanuel Vadot <manu@bidouilliste.c > > om> wrote: > > > > > > On Tue, 26 Sep 2017 12:21:52 -0600 > > > Ian Lepore <ian@freebsd.org> wrote: > > > > > > > > > > > On Tue, 2017-09-26 at 20:04 +0200, Emmanuel Vadot wrote: > > > > > > > > > > On Tue, 26 Sep 2017 11:32:21 -0600 > > > > > Brett Glass <brett@lariat.net> wrote: > > > > > > > > > > > > > > > > > > > > > > > One would think that sauce for the goose would be sauce for > > > > > > the > > > > > > gander. But is this particular Cubox now useless with > > > > > > FreeBSD? > > > > > > And if so, why? It is not an unusual model. The Cubox does > > > > > > work > > > > > > if I flash their "Ignition" startup software (which is used > > > > > > to > > > > > > bootstrap by downloading various OS images) to the same > > > > > > Micro SD card. > > > > > > > > > > > > --Brett Glass > > > > > The problem isn't FreeBSD related, it's U-Boot related. > > > > > > > > > > You could test build mainline u-boot just to confirm that it > > > > > isn't > > > > > something due to our ports. > > > > > > > > > If we used to provide working cubox images and we don't anymore, > > > > it's > > > > hard to call that anything but a freebsd problem. > > > There is working cubox images, the last one is from yesterday. > > > You even say yourself that you did test it and that it worked. > > > Do we even know if the snapshot worked for this board ? > > > Brett, could you test the 11.0 release for example ? (I don't > > > remember > > > if for 11.1 we already switch u-boot or not). > > I believe the change is in the u-boot port itself. However, I don't > > think it's a u-boot problem (IMHO), it's a u-boot build configuration > > problem. There are different board variants with different hardware > > layout. u-boot has code for it, but our build does not account for. > > Unless the scripts that build the 11.1 image use a different revision > > of the u-boot port, wouldn't it just use the current 2017.7 base? > > > > I'm trying to figure out how to generate a u-boot with the correct > > SPL > > portion of u-boot. One could pull the SolidRun u-boot repo, or go > > find > > the ports commit before the changeover and see if we can generate the > > correct SPL. > > > > I looked at Mainline u-boot and there is a board directory for solid > > run. > > https://github.com/u-boot/u-boot/blob/master/board/solidrun/mx6cuboxi > > /mx6cuboxi.c > > seems to support multiple memory configurations based on defines, so > > this should just be a configuration problem. > > > > We clearly need to start supporting the lower spec'd SolidRun boards > > because this has come up a couple of times now since the changeover. > > It should be just a matter of creating a port that does the same > > thing > > but generates the correct SPL file? My SOM is a i2eX so I can't be > > too > > much help (and I've also over volunteered myself!). > > > > Russ > > > > The old imx6 uboot ports generated a single copy of uboot that would > boot dual and quad-core versions of both hummingboard and cubox > systems. If the new uboot works only on quad core, that's another > regression. It might be possible to extract the u-boot.imx file from a > freebsd 10 image to get back to the old one. > > Ooops. Except it appears those no longer exist. Is this a loss of functionality when the changes were upstreamed? Is it a bad configuration on our part? Any idea what might be going on or how to fix it? Warner
Want to link to this message? Use this URL: <https://mail-archive.FreeBSD.org/cgi/mid.cgi?CANCZdfqAM-kXuBq2YcngR9PKajxJSTa_UNpm-v7zbMH2bvpo6g>